kogan KAWLM70TLTA Premium Tilt Extendable Full Motion Wall Mount User Guide
- June 12, 2024
- Kogan
Table of Contents
kogan KAWLM70TLTA Premium Tilt Extendable Full Motion Wall Mount
Product Information
The Premium Tilt Extendable Full Motion Wall Mount is a versatile wall mount suitable for TVs ranging from 32 to 70 inches. It has a maximum weight rating of 45kg (99 lbs) and offers VESA compatibility with various configurations, including 200×200, 300×200, 300×300, 400×200, 400×300, and 400×400.
Safety & Warnings
- Rated weight is 45kg (99 lbs). Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Failure to use safety gear and safe working methods may result in property damage, serious injury, or death. Maintenance
It is important to regularly check that the wall mount is secure and safe to use. We recommend performing maintenance checks at least every three months.
Components
- Wall mount assembly:
- B (x1)
- A (x1)
- C (x2)
- D (x4)
- E 4mm (x1)
- F (x1)
- W-A ST8x90 (x5)
- Adapters (depends on TV):
- W-C (x4)
- M-A M5x14 (x4)
- M-B M6x14 (x4)
- M-C M6x30 (x4)
- M-D M8x30 (x4)
- M-E M8x50 (x4)
- M-F D5 (x4)
- M-G D8 (x4)
- Additional Tools Required (Not Supplied):
- M-H (x8)
- M-I (x8)
- Phillips head screwdriver
- Stud finder
- Spirit level
- Pencil
- Electric drill
- Socket wrench
Product Usage Instructions
Step 1: Getting started
Pull the extendable arms out away from the base, then remove the base cover. It is recommended to have at least two people for this installation. Failure to use safety gear and safe working methods may result in property damage, serious injury, or death.
Step 2: Drywall, plaster or timber walls (with studs)
Use a stud finder to locate safe and suitable locations to install into the wall. Use a spirit level to double check the correct angle of the mount and mark the intended hole positions with a pencil (2a). When installing on a drywall, plaster, or timber wall, refer only to the center holes of the mount. Drill holes in the desired locations (90mm deep, 6mm wide) (2b).
Insert the top screw (W-A) first to support the mount (2c). With the wall mount held in place, insert the washers and screws (W-C, W-A), tightening with a socket wrench (2d). When installing on a drywall, plaster, or timber wall, do not use the screw anchors (W B).
It is recommended to have at least two people for this installation. Failure to use safety gear and safe working methods may result in property damage, serious injury, or death.
Step 2: Concrete and masonry walls
Use a spirit level to double check the correct angle of the mount and mark the intended hole positions with a pencil (2b). Drill holes in the desired locations (95mm deep, 12mm wide) (2b).
Insert the screw anchors (W-B) into each pre-drilled hole, then insert the top screw (W-A) first to support the mount (2c). With the wall mount held in place, insert the washers and screws (W-C, W-A), tightening with a socket wrench (2d). It is recommended to have at least two people for this installation. Failure to use safety gear and safe working methods may result in property damage, serious injury, or death.
Step 3: Once the wall mount is secured in place, the base cover can be replaced.
Step 4: Set the mounting brackets for your required VESA configuration
Depending on your TV, a combination of spacers (M-H, M-I) may be required to help create the correct amount of space for the brackets. Ensure the screws are fitted correctly into your TV’s VESA mount holes and are not too long or too short in the back of the TV.
SAFETY & WARNINGS
CAUTION:
Rated weight is 45kg (99 lbs).
Use with products heavier than the rated weights indicated may result in
instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and quality tools must be used.
- This product is suitable for installation on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- Do not allow children to play near this stand.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- A minimum of two people are recommended for this installation. Failure to use safety gear and safe working methods may result in property damage, serious injury or death.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular
intervals (at least every three months).
Suitable for TVs 32” – 70” maximum
VESA compatibility:
- 200×200, 300×200, 300×300
- 400×200, 400×300, 400×400
COMPONENTS
Wall mount assembly:
Additional Tools Required (Not Supplied):
ASSEMBLY
Step 1: Getting started
Pull the extendable arms out away from the base, then remove the base cover.
Step 2: Drywall, plaster or timber walls (with studs) Use a stud finder to
locate safe and suitable locations to install into wall. Use a spirit level to
double-check the correct angle of the mount and mark the intended hole
positions with a pencil (2a). When installing on a drywall, plaster or timber
wall, refer only to the centre holes of the mount. Drill holes in the desired
locations (90mm deep, 6mm wide) (2b).
Insert the top screw (W-A) first, to support the mount
(2c). With the wall mount held in place, insert the washers and screws (W-C,
W-A), tightening with a socket wrench (2d). When installing on a drywall,
plaster or timber wall, do not use the screw anchors (W B). 
Step 2: Concrete and masonry walls Use a spirit level to double-check the
correct angle of the mount and mark the intended hole positions with a pencil
(2b). Drill holes in the desired locations (95mm deep, 12mm wide) (2b)
Insert the screw anchors (W-B) into each pre-drilled hole, then insert the top
screw (W-A) first to support the mount (2c). With the wall mount held in
place, insert the washers and screws (W-C, W-A), tightening with a socket
wrench (2d).
Step 3: Once the wall mount is secured in place, the base cover can be
replaced.
Step 4: Set the mounting brackets for your required VESA configuration
Step 5: Attaching the mounting brackets to your TV.
Depending on your TV, a combination of spacers (M-H, M-I) may be required to
help create the correct amount of space for the brackets. Ensure the screws
are fitted correctly into your TV’s VESA mount holes, and are not too long or
too short in the back of the TV.
Ensure washers and screws are aligned in the center of the opening. Do not install with washers and screws off to either side.
Step 6: Attaching the TV to the wall mount.
Ensure a gap of at least 4mm on the two upper mount bracket bolts (1) to allow
the two openings on the mount to slide into place (2), while also removing the
lower screw of the mount bracket (1). With two people, lift the TV up and into
position on the mount. Tighten the two bolts, and reinsert the lower screw
.
Step 7: Use the supplied cable management clips to secure all of the TV’s
power and connection cables, as shown below.
ADJUSTING
Adjusting level angle: Loosen the nuts on the back of the mount (as shown
below) to balance the TV’s level. When done, ensure nuts are securely
tightened.
Adjusting tilt angle: Loosen the nuts on the side of the mount (as shown
below) to adjust the TV’s tilt angle. When done, ensure nuts are securely
tightened.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>