goobay 58526 TV Floor Stand Basic User Manual
- June 12, 2024
- goobay
Table of Contents
**goobay 58526 TV Floor Stand Basic User Manual
**
Safety instructions
The user manual is part of the product and contains important information for correct use.
- Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
- Keep this user manual.
- Do not modify product and accessories.
- Use product, product parts and accessories only in perfect condition.
- In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.
Not suitable for children and persons with physically and/or mentally limited abilities.
- Secure packaging, small parts and insulation against accidental use.
- Mounting, dismounting, care, storage, transport and disposal may only be carried out by users with basic mechanical knowledge.
- Have maintenance and repair work carried out by qualified personnel only.
- Avoid stresses such as heat and cold, moisture and direct sunlight vibration and mechanical pressure.
- Place, install and transport product, product parts and accessories in a safe way.
- When working with burdens, secure yourself and the working place, let a se- cond person help you.
- Do not install the product to places with direct sunlight or bright light.
This contributes to eye fatigue.
- Do not hold limbs between shear parts during use.
Moving product parts can pinch or squeeze limbs.
- Keep enough space around product and to the whole system to ensure proper ventilation and mobility.
- Compare the specifications of all products used.
The specifications of all used products must match or be within the specified range. The supporting surfaces must be able to safely withstand the weight of the mount and the equipment attached to it.
- Use the mounting screws provided.
- Do not over-tighten the screws.
Threads can be damaged
Description and Function
Product
The product is a floor stand for mounting TV sets or screens up to 40 kg.
Scope of Delivery
See Tab. 1.
-
Foot piece (A)
-
Lower stand element (B)
-
Upper stand element (C)
-
Shelf (D)
-
Monitor mount (E)
-
Mounting rail **(F)
**
-
Fixing wedge with screw (G)
-
Furniture glides (H)
-
Screw (I)
-
Screw (J)
-
Plastic washer (K)
-
Metal washer (L)
-
Screw (M)
-
Screw **(N)
**
-
Allen key (O)
-
M5x14 (M-A)
-
M6x14 (M-B)
-
M6x30 (M-C)
-
M8x30 (M-D)
-
M8x50 **(M-E)
**
-
Washer (M-F)
-
Spacer (M-G)
-
Spacer (M-H)
-
User Manual
Required Tools
See Tab. 2.
- Philips screwdriver (1)
Specifications
| Item No. | 58526 |
|---|---|
| Screen size | 94 – 178 cm (37 – 70“) |
| Load capacity monitor mount | 40 kg |
| Load capacity shelf | 5 kg |
Distance between threaded holes according to VESA standard (vertical x
horizontal)| 200×200, 300×200, 300×300, 400×200,400×300, 400×400, 600×400
Dimensions (width x depth x max. height) / Weight| 650 x 400 x 1458 mm / 15.37
kg
Swivel range| -35° ~ +35°
Intended Use
We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.
Preparation
- Check the scope of delivery for completeness and integrity.
Mounting
CAUTION! Risk of injury from broken glass!
The foot piece is made of glass and can break if handled incorrectly.
- Proceed with caution during assembly.
- Dispose of broken glass with appropriate protective measures.
Preparing the foot piece
See Fig 1.
Attaching the lower stand element to the foot piece
See Fig. 2.
Attaching the upper stand element to the lower stand element
See Fig. 3.
Attaching the monitor mount to the stand
See Fig. 4.
Attaching the shelf
See Fig. 5.
Attaching the mounting rails to screen
See Fig. 6.
**Installing and securing the mounting rails
**
See Fig. 7 and Fig. 8.
This step must be carried out by 2 people!
Routing the cable through the stand
See Fig. 9.
Adjusting the swivel angle and screen height
See Fig. 10.
Maintenance, Care, Storage and Transport
- Let maintenance and repair work only be carried out by qualified personnel.
- Protect the joints from dirt and grease them regularly with light machine oil.
- Only use a dry and soft cloth for cleaning. Use caution when cleaning to avoid scratches. In case of heavy soiling, the cleaning cloth can be slightly moistened with water.
- Do not use detergents or chemicals.
- Regularly check the tightness of product/screws. Fixing holes can remain visible when the product is removed. After prolonged use, a stain may remain on the underground.
- Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
- Keep and use the original packaging for transport.
Disposal instructions
This product does not belong into the household waste. At the end of its working life, give it back to the manufacturer, the sales outlet or established for this purpose, public collection points for free. Details of disposal are regulated by the respective country‘s law. Recyclables are into the recycle circuit, in order to gain new raw materials. The following recyclable materials are collected in municipal collection: Waste glass, plastics, scrap metal, sheets and much more. With this type of scrap usage you are making an important contribution to protecting our environment.
Warranty
Detailed warranty conditions on www.mygoobay.com.
Symbols used
For indoor use only| IEC 60417- 5957|
---|---|---
REV2021-12-16
V1.0aw
Goobay®
by Wentronic GmbH
Pillmannstraße 12
38112 Braunschweig
Germany
Made in China
© by Wentronic Deutschland
Hotline: +49 (0180) 5005882
E-Mail: info@goobay.de
Web:
www.wentronic.com/content/mygoobay/