kogan OVOLBRLACWA Olivia Laundry Cabinet User Guide

kogan OVOLBRLACWA Olivia Laundry Cabinet User Guide

COMPONENTS

Lay all components out on a clean floor and ensure all parts are included. If any pieces are missing, check all packaging thoroughly, then contact help.Kogan.com for assistance.

1. Top Panel
   

2. Right Panel
   

3. Rear Panel

4. Left Panel
   

5. Front Panel
   

6. Bottom Panel
   
   A Cam Bolt (x12)

B Cam Connector (x12)

C Stepped Hinge (x2)

D Screw (x16)

E Right Support Hinge

F Left Support Hinge

ASSEMBLY

Step 1:

• Insert 6 cam bolts (A) into the Right Panel (2) in the locations shown below.

• Insert 3 Cam Connectors ( B ) into the Rear Panel (3) in all the holes adjacent to the corresponding Cam Bolts (A).
  Note: Ensure the arrow on the Cam Connectors (B) are facing the direction of the hole.

• Secure parts (2) & (3) together by screwing the Cam Connectors (B) clockwise.

A Cam Bolt (x6)

B Cam Connector (x3)

Step 2:

• Insert 3 Cam Connectors (B) into the Front Panel (5).
  Note: Ensure the arrow on the Cam Connectors (B) are facing the direction of the hole.

• Secure parts (2) & (5) together by screwing the three Cam Connectors (B) clockwise, in the location shown below

B Cam Connector (x3)

Step 3:
Slide the Bottom Panel (6) into the groove in the cabinet assembly

Step 4:

• Insert 6 cam bolts (A) into the Left Panel (4) in the locations shown below.

• Insert 6 Cam Connectors (B) into parts (3) & (5) in all the holes adjacent to the corresponding Cam Bolts (A).
  Note: Ensure the arrow on the Cam Connectors (B) are facing the direction of the hole.

• Secure the Left Panel (4) to the cabinet assembly by screwing the Cam Connectors (B) clockwise.

A Cam Bolt (x6)

B Cam Connector (x6)

Step 5:

• Attach the two Stepped Hinges (C) to the Top Panel (1) in the locations shown using the supplied Screws (D).
• Attach both Support Hinges ( E & F) to the Top Panel (1) in the location shown using the supplied Screws (D).

| | |
---|---|---|---
C Stepped Hinge (x2)| D Screw (x8)| E R. Hinge Support| F L. Hinge Support

Step 6:
Secure the Top Panel (1) to the cabinet assembly using the Stepped Hinges (C), Support Hinges ( E & F) and the supplied Screws (D).

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>