KS VERLICHTING Globe 7008 Lighting Post Instruction Manual
- June 12, 2024
- KS VERLICHTING
Table of Contents
KS VERLICHTING Globe 7008 Lighting Post
Product Information
The product is an armature or luminaire designed for lighting purposes. It is
not suitable for immersion in water, liquids, ponds, or swimming pools. The
armature should not be submerged in any form.
Please note that the product may differ in appearance from the illustrations
provided. For more information, please visit www.ks-
verlichting.nl.
Last updated: February 2017
Product Usage Instructions
- Do NOT immerse the armature in water, liquids, ponds, or swimming pools.
- Ensure the armature is installed in a suitable dry location.
- Follow the installation instructions provided with the product.
- Only use the armature for its intended purpose of providing lighting.
- Avoid exposing the armature to extreme temperatures or humidity.
- Maintain proper electrical connections and avoid overloading the armature.
- Regularly clean the armature to remove dust and dirt for optimal performance.
- If you experience any issues or have questions, refer to the manufacturer’s website or contact their customer support for assistance.
Assembly and installation instructions
-
The light fitting must be installed by a qualified electrician. The main supply must be disconnected at the fuse box before starting installation. Before starting with installation, use a voltage tester to make sure the wiring is off circuit. It is not sufficient just to turn off the power at the switch. You also need to ensure that in relation to the earthing on the electrical lead the local regulations are observed.
-
Make sure you have a solid foundation. Drill the necessary holes. Then insert the plugs. Run the cable from the ground by the foot and the pole.
Mount the foot. -
Connect the ground cable to the fitting.
Put the fitting with the supplied screws. Use the box at the bottom of the flange to secure the cable. The flange-bulb holder can now be mounted on the pole.4. Make sure you put a light bulb corresponding to the type and wattage as indicated on the packaging. Attach the globe and tighten it firmly.
This luminaire is only suitable for vertical placement (upright). -
Switch on the main supply. The light is now ready for use.
This fixture do NOT immerse in water, liquids, ponds or swimming pools.
This luminaire is NOT suitable for immersion.
Maintenance requirements: It is recommended that the surface is rubbed
regularly with a neutral oil or water without cleaning agents and then wiped
with a soft cloth. Keep the armature free from a salty environment, coastal
location and an acid free environment, this affects the armature.
For a long life lamps should always be placed above the ground. In case of
damage or fracture of the globe, replace the globe directly to insure the IP
value. Make sure when replacing the lamp that the power is off and the lamp
has cooled down.
The drawings are for illustrative purposes only. They may vary in model of the lamp. www.ks-verlichting.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>