KS VERLICHTING Jersey M 7353 Outdoor Lamp Wall Cone Spot Black Instruction Manual
- June 12, 2024
- KS VERLICHTING
Table of Contents
Jersey M 7353 L 7354 M-Rusty 7367
M-Wit 7362
Sydney M 7603 M 7604
Outdoor Lamp Wall Cone Spot Black
Instruction Manual
Jersey M 7353 Outdoor Lamp Wall Cone Spot Black
Installation instructions wall lamp
Assembly and installation:
1. The light fitting must be installed by a qualified electrician. The main
supply must be disconnected at the fuse box before starting installation.
Before starting with installation, use a voltage tester to make sure the
wiring is off circuit. It is not sufficient just to turn off the power at the
switch. (see fig. 1)
Choose the most suitable place for the lighting. You also need to ensure that
in relation to the earthing on the electrical lead the local regulations are
observed.
2. Drill holes in the wall. Then insert the plugs.
Put the cable from the wall through the hole in the installation base. Screw
the installation base on the wall. (see figure 2)
3. Connect the wires from the wall to the connector block. (see figure 3)
Attach the wires,and keep the correct colors in track:
Blue lead = Neutral (N)
Brown or Black lead = Live (L)
Yellow/Green lead = Earth (not on class II light fittings)
Note that: the (brown) wire L1 corresponds to the mains cable L (or the
connector marked with the symbol L), the (blue) wire N1 corresponds to the
neutral conductor N (or the connector marked with the symbol N), the (yellow /
green) wire 1 corresponds to the earth cable (or the luster terminal with
symbol )
4. + 5. Make sure you put a light bulb corresponding to the type and wattage
as indicated on the packaging. You can place the lamp over the mounting plate
on the wall. (see figure 4 & 5)
6. Switch on the main supply. The light is now ready for use. (see figure 6)
Maintenance requirements:
It is recommended that the surface is rubbed regularly with a neutral oil or
water without cleaning agents and then wiped with a soft cloth. Keep the
armature free from a salty environment, coastal location and an acid free
environment, this affects the armature.
Rub it regularly with Carwash, it ensures a longer lifetime of the armature.
www.ks-verlichting.nl
Datum: March 2020