KS VERLICHTING 7008 Floor Lamp Instruction Manual
- June 12, 2024
- KS VERLICHTING
Table of Contents
KS VERLICHTING 7008 Floor Lamp
Product Information
This product is a luminaire designed for lighting purposes. It is important to note the following information:
- Do NOT immerse this fixture in water, liquids, ponds, or swimming pools.
- This luminaire is NOT suitable for immersion.
- The model of the lamp may vary from the illustrations provided.
For further information and updates, please visit the official website: www .ks-verlichting.nl.
Product Usage Instructions
To ensure the safe and proper usage of this luminaire, please follow these instructions:
- Do NOT immerse the luminaire in water, liquids, ponds, or swimming pools.
- Keep the luminaire away from any sources of water to prevent damage or electrical hazards.
- Ensure that the luminaire is installed and mounted securely according to the provided guidelines.
- Use only the recommended wattage and type of bulbs specified for this luminaire.
- Regularly inspect and clean the luminaire to maintain optimal performance.
Power
Power Off
Power On
Assembly and installation instructions
- The light fitting must be installed by a qualified electrician. The main supply must be disconnected at the fuse box before starting installation. Before starting with installation, use a voltage tester to make sure the wiring is off-circuit. It is not sufficient just to turn off the power at the switch. You also need to ensure that in relation to the earthing on the electrical lead the local regulations are observed.
- Make sure you have a solid foundation. Drill the necessary holes. Then insert the plugs. Run the cable from the ground by the foot and the pole.
- Mount the foot. (see fig. 2)
- Connect the ground cable to the fitting. (see fig. 3).
- Put the fitting with the supplied screws. Use the box at the bottom of the flange to secure the cable. The flange-bulb holder can now be mounted on the pole.4. Make sure you put a light bulb corresponding to the type and wattage as indicated on the packaging.
- Attach the globe and tighten it firmly.
- This luminaire is only suitable for vertical placement (upright). (see Fig. 4)
- Switch on the main supply. The light is now ready for use.
- This fixture does NOT immerse in water, liquids, ponds or swimming pools.
- This luminaire is NOT suitable for immersion.
Maintenance requirements: It is recommended that the surface is rubbed regularly with a neutral oil or water without cleaning agents and then wiped with a soft cloth. Keep the armature free from a salty environment, coastal location and an acid free environment, this affects the armature. For a long life lamps should always be placed above the ground. In case of damage or fracture of the globe, replace the globe directly to insure the IP value. Make sure when replacing the lamp that the power is off and the lamp has cooled down.
The drawings are for illustrative purposes only. They may vary in model of the lamp.