KS VERLICHTING 7375 Dolce Retro Wall Lamp Instruction Manual
- June 12, 2024
- KS VERLICHTING
Table of Contents
KS VERLICHTING 7375 Dolce Retro Wall Lamp
Dolce Wandlamp
The Dolce Wandlamp is a stylish and modern lighting fixture designed to
enhance the ambiance of any room. It is available in various models, including
7375, 7376, 7377, 7378, 7379, and 7385, allowing you to choose the perfect
option for your space.
Product Information
- Model Numbers: 7375, 7376, 7377, 7378, 7379, 7385
- Product Type: Wandlamp (Wall Lamp)
- Installation: Mountable on walls
Product Usage Instructions
Before starting the installation process, please read and
understand the following instructions carefully:
GB – Assembly and installation instructions:
- Check the contents of the package to ensure that all necessary parts are present.
- Mark the desired position on the wall where you want to install the wall lamp.
- Drill holes in the wall according to the markings and insert the provided plugs into the holes.
- Securely attach the wall lamp to the wall using the provided screws.
Please note that the illustrations provided are for reference purposes only and the actual model of the lamp may vary.
For more information and support, visit our website: www.ks-verlichting.nl Updated: May 2020
Dolce 7375 | 7376 | 7377 | 7378 | 7379 | 7385 | wandlamp
INSTALLATION
HOW TO USE
Assembly and installation instructions
- A qualified electrician must install the light fitting. The main supply must be disconnected at the fuse box before starting installation. Before starting with installation, use a voltage tester to make sure the wiring is off circuit. You also need to ensure that in relation to the earthing on the electrical lead the local regulations are observed.
- Drill holes in the wall. Then insert the plugs. Put the cable from the wall through the Hole in the back plate.
- Attach the wires. Prevent humidity on all components. Make sure there is a watertight seal. Keep the correct colors in track: Blue lead = Neutral (N) Brown – Black lead = Live (L) Yellow/ Green lead = Earth ( ). The earth wire (yellow / green) is to be connected to the earth screw / wire of the armature. You can screw the lamp holder on the back plate.
- Make sure you put a light bulb corresponding to the type and wattage as indicated on the packaging. Then you can place the lamp over the screws in the wall.
- Please use gloves before placing the glass, because of possible sharp edges. Place the glasses in the lamp.
- Switch on the main supply. The light is now ready for use.
Maintenance requirements
It is recommended that the surface is rubbed regularly with a neutral oil or water without cleaning agents and then wiped with a soft cloth. Keep the armature free from a salty environment, coastal location and an acid free environment, this affects the armature. Rub it regularly with Carwash, it ensures a longer lifetime of the armature. In case of damage or fracture of the protective glass, replace the glass directly to insure the IP value. Make sure when replacing the lamp that the power is off and the lamp has cooled down.
The drawings are for illustrative purposes only. They may vary in model of the lamp.
Mei 2020
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>