KS Verlichting M 7353 Wall Lamp Instruction Manual

June 8, 2024
KS VERLICHTING

KS Verlichting M 7353 Wall Lamp

KS-Verlichting-M-7353-Wall-Lamp-PRODUCT

INSTALLATION INSTRUCTION

KS-Verlichting-M-7353-Wall-Lamp-
FIG-1

Installation instructions wall lamp

Assembly and installation
  1. The light fitting must be installed by a qualified electrician. The main supply must be disconnected at the fuse box before starting installation. Before starting with installation, use a voltage tester to make sure the wiring is off circuit. It is not sufficient just to turn off the power at the switch. (see fig. 1) Choose the most suitable place for the lighting. You also need to ensure that in relation to the earthing on the electrical lead the local regulations are observed.

  2. Drill holes in the wall. Then insert the plugs. Put the cable from the wall through the hole in the installation base. Screw the installation base on the wall. (see figure 2)

  3. Connect the wires from the wall to the connector block. (see figure 3) Attach the wires, and keep the correct colors in track
    Blue lead = Neutral (N)
    Brown or Black lead = Live (L)
    Yellow/Green lead = Earth (not on class II light fittings)
    Note that: the (brown) wire L1 corresponds to the mains cable L (or the connector marked with the symbol L), the (blue) wire N1 corresponds to the neutral conductor N (or the connector marked with the symbol N), the (yellow / green) wire 1 corresponds to the earth cable (or the luster terminal with symbol )

  4. Make sure you put a light bulb corresponding to the type and wattage as indicated on the packaging. You can place the lamp over the mounting plate on the wall. (see figure 4 & 5)

  5. Switch on the main supply. The light is now ready for use. (see figure 6)

Maintenance requirements

  • It is recommended that the surface is rubbed regularly with a neutral oil or water without cleaning agents and then wiped with a soft cloth. Keep the armature free from a salty environment, coastal location and an acid free environment, this affects the armature.

  • Rub it regularly with Carwash, it ensures a longer lifetime of the armature.

  • www.ks-verlichting.nl

  • Datum: March 2020

  • Jersey M 7353 L 7354 M-Rusty 7367

  • M-Wit 7362

  • Sydney M 7603 M 7604

Documents / Resources

| KS Verlichting M 7353 Wall Lamp [pdf] Instruction Manual
M 7353 Wall Lamp, M 7353, Wall Lamp, Lamp
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

KS VERLICHTING User Manuals

Related Manuals