KS VERLICHTING 7595 Casa Wall Lamp for Outdoor Instructions
- June 12, 2024
- KS VERLICHTING
Table of Contents
KS VERLICHTING 7595 Casa Wall Lamp for Outdoor
Product Information
- Product Name: Wandlamp | Casa – 7595
- Dimensions: 8mm
- Model: The drawings are for illustration purposes only.
- The actual model of the lamp may vary.
- Website: www.ks-verlichting.nl (Last updated in December 2019)
Product Usage Instructions
- Please ensure that you have all the necessary components and tools before starting the installation process.
- Identify a suitable location on the wall where you want to install the wandlamp.
- Carefully follow the respective installation instructions provided in your language:
- NL – Montage – Installatie aanwijzingen
- D – Montage – Installationsanleitung
- GB – Assembly and installation instructions
- F – Instructions de montage
Refer to the illustrations and diagrams in the installation instructions for
guidance on how to assemble and install the wandlamp properly. If you
encounter any difficulties or have questions during the installation process,
please refer to the website www.ks verlichting.nl for additional support or contact their customer service.
Note: It is recommended to consult a professional electrician if you are
unsure about any electrical connections or wiring involved in the installation
process.
Assembly and installation instructions
- The light fitting must be installed by a qualified electrician. The main supply must be disconnected at the fuse box before starting installation. Before starting with installation, use a voltage tester to make sure the wiring is off-circuit. You also need to ensure that in relation to the earthing on the electrical lead, the local regulations are observed.
- Drill holes in the wall. Then insert the plugs. Put the cable from the wall through the Hole in the back plate.
- Attach the wires. Prevent humidity on all components. Make sure there is a watertight seal.
- Keep the correct colors in track: Blue lead = Neutral (N) Brown – Black lead = Live (L) Yellow/ Green lead = Earth. The earth wire (yellow/green) is to be connected to the earth screw/wire of the armature. You can screw the lamp holder on the back plate.
- Make sure you put a light bulb corresponding to the type and wattage as indicated on the packaging. Then you can place the lamp over the screws in the wall.
- Please use gloves before placing the glass, because of possible sharp edges. Place the glasses in the lamp.
- Switch on the main supply. The light is now ready for use.
- Maintenance requirements: It is recommended that the surface is rubbed regularly with neutral oil or water without cleaning agents and then wiped with a soft cloth. Keep the armature free from a salty environment, coastal location, and an acid-free environment, this affects the armature. Rub it regularly with Carwash ensures a longer lifetime of the armature.
- In case of damage or fracture of the protective glass, replace the glass directly to insure the IP value. Make sure when replacing the lamp that the power is off and the lamp has cooled down
The drawings are for illustrative purposes only. They may vary in the model of the lamp.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>