CONRAD 2637995 Multi Function Table Lamp Instruction Manual
- June 12, 2024
- CONRAD
Table of Contents
CONRAD 2637995 Multi-Function Table Lamp
Product Information
Product Name: Multifunctional Table Lamp
Product Number: 2637995
Package Contents
- Product
- USB Cable
- User Manual
Latest Product Information
Download the latest product information from www.conrad.com/downloads or scan the QR code provided. Follow the instructions on the website.
This product is manufactured according to Protection Class III.
Safety Instructions
Fire Hazard! Do not connect the lamp to a power source with the light turned on, brightness set to 100%, and a connected device charging its battery simultaneously. Failure to follow this instruction may cause the product to overheat and reduce the integrated battery’s lifespan.
Cleaning and Maintenance
- Disconnect the product from the power source.
- Use a dry, lint-free cloth to clean the product.
Disposal
Dispose of the product in accordance with local regulations.
Technical Specifications
No technical specifications are provided in the given text extract.
Product Usage Instructions
- Unpack the product and ensure that all package contents are present.
- Refer to the user manual for detailed instructions on using the multifunctional table lamp.
- Prior to connecting the lamp to a power source, ensure that the light is turned off and the brightness is set to a level lower than 100%.
- If charging a device’s battery while using the lamp, make sure the lamp is not turned on and the brightness is reduced to avoid overheating.
- For cleaning the lamp, disconnect it from the power source and use a dry, lint-free cloth to wipe its surface.
- Dispose of the product responsibly in accordance with local regulations.
Multi-Function Table Lamp
Item no: 2637995
Intended use
- The product is a multi-functional table lamp.
- The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances.
- If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards.
- The product complies with the statutory national and European requirements.
- For safety and approval purposes, you must not rebuild and/or modify the product.
- Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
- All company names and product names are trademarks of their respective owners. All rights reserved. USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
Delivery contents
- Product
- USB cable
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
- The symbol warns of hazards that can lead to personal injury.
- This product is constructed according to protection class III.
- This product must only be used in dry, enclosed indoor areas. It must not become damp or wet.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
- The product is not a Keep it out of the reach of children and pets.
- Do not leave packaging material lying around This may become dangerous playing mater- ial for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised re- pair
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre
Handling
- Handle the product Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not place the product under any mechanical
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and
- Protect the product from high humidity and
- Protect the product from direct
Operation
- Consult an expert when in doubt about the operation, safety or connection of the
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental DO NOT attempt to repair the product yourself. Safe operation can no longer be guar- anteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related
Li-ion battery
- The rechargeable battery is permanently built into the product and cannot be
- Never damage the rechargeable Damaging the casing of the rechargeable battery might cause an explosion or a fire
- Never short-circuit the contacts of the rechargeable Do not throw the battery or the product into fire. There is a danger of fire and explosion!
- Charge the rechargeable battery regularly, even if you do are not using the Due to the re- chargeable battery technology being used, you do not need to discharge the rechargeable battery first.
- Never charge the rechargeable battery of the product unattended.
- When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain amount of heat is generated during charging.
LED light
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments
Product
It is not recommended to operate the product fully loaded (e.g. simultaneously connected to a power supply, lamp ON at 100%, while at the same time charging a connected device. This may cause the product to heat up and reduce the life span of the battery.
Cleaning and care
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers
or distributors within the meaning of the ElektroG End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
This product contains a light source of energy efficiency class F.
- Input 5 V/DC, 1.2 A (via USB-C®)
- Output 5 V/DC, 1.0 A (via USB-A)
- Rechargeable battery3.7 V/DC 3000 mAh 11.1 Wh Li-ion
- Protection clas III
- Protection over current, over voltage, over temperature
- LED 6 pcs SMD
- Colour temperature4000 K
- Colour rendering index (CRI)>80
- Brightness 130 lm (100 %), 60 lm (45 %), 25 lm (15 %)
- Battery recharge approx. 5 hrs @ 5 V/DC, 1.2 A
- Battery life aapprox. 7 hrs @ 100 % brightness level
- Operating conditions 0 to +35 °C, <85 % RH (non-condensing)
- Storage conditions -20 to +50 °C, <85 % RH (non-condensing)
- Dimensions (L x W x H)46 x 46 x (146 – 255) mm
- Weight 194 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE. *2637995_V1_0323_dh_ss_en 815617035-2 I1/O1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>