Ocular LTE Plus User Guide

June 12, 2024
OCULAR

Ocular LTE Plus User Guide
Ocular LTE Plus

Accessories of Tethered Model

Accessories of Tethered Model

Station Overview

Station Overview

Technical Parameters

Level 2 EV Charging Station

  • Phase Mode: Single Phase
  • Installation Method: Wall/Stand
  • Certificate: CE, TUV, RCM
  • IP Rating: IP66
  • Rated Voltage: 230VAC +/- 10%
  • Rated Current: 32A
  • Maximum Power: 7.2 kW
  • Ambient External Temp: -25°C ~ +55°C
  • Enclosure Material: ABS + PC alloy
  • Warranty: 2 years
  • Phase Mode: Three Phase
  • Installation   Method: Wall/Stand
  • Certificate: CE, TUV, RCM
  • IP Rating: IP66
  • Rated Voltage: 400VAC +/- 10%
  • Rated Current: 32A
  • Maximum Power: 22 kW
  • Ambient External Temp: -25°C ~ +55°C
  • Enclosure Material: ABS + PC alloy
  • Warranty: 2 years

Instruction for Use

Instruction for Use

Connect the EV and the wallbox with the EV charging cable

Make sure the wallbox is connected to power

  • Hang the cable on the hook when it is not in use

Installation Guide

Installation Guide
Installation Guide
Installation Guide
Installation Guide
Installation Guide
Installation Guide

Note: Power cables must be crimped with suitable ferrules otherwise product warranty will be voided

Illustration of Screen and LED

Illustration of Screen and LED 
Illustration of Screen and LED 
Illustration of Screen and LED 
Illustration of Screen and LED 
Illustration of Screen and LED 

  1. Real-time power

  2. Three Live Wire data

  3. Charging Time

  4. Power Consumption

  5. Charging Icon

  6. PCB Temperature
    Illustration of Screen and LED 

  7. Emergency stop

  8. Over Current

  9. Over Temperature

  10. Leakage protection

  11. Short Current
    Illustration of Screen and LED 

| IDLE| CONNECTED| CHARGING| FINISHED| ERROR
---|---|---|---|---|---
Instruction of LED Status| OFF
| Continuous light
| Roling
| Continuous light
| Red filching

Note:

The Ocular LTE plus will automatically restart when minor problems occur.

For serious failures, the system cannot automatically recover. In order to remind user of this failure, the system will automatically countdown 10 seconds to restart.

Safety Warning

  • Regularly check whether the charging station has visible damage.
    Make sure that all safety facilities are available at all times and are tested regularly to ensure they can operate normally. Visit ocularcharging.com.au for a yearly mainte- nance check according to Australian standards.

  • If a ground fault occurs, it must be assumed that the cable carries voltage. Please confirm that there’s no high-voltage power in the system before inspecting the charging station.

  • Persons who install and use charging stations must obey the principles and regula- tions mentioned to ensure personal and equipment safety. > Before powering on the device, please confirm that the device is properly grounded to avoid unnecessary accidents. All tools’ unnecessarily exposed metal parts should be insulated to prevent them from touching the metal frame to avoid short circuits.

  • Do not modify, retrofit, or change any part by yourself under any circumstances.
    To ensure the service life and stable operation of the charging station, the operating environment should be kept clean as possible with a relatively stable temperature and humidity. The charging station must not be used in a flammable environment or environments with volatile gas.

  • Be sure to confirm that the input voltage, frequency, circuit breakers and other conditions of the device meet the specifications before the device is powered on

Maintenance

Ocylar LTE plus s only recommended for use in residential applications and use outside of this area (i.e. for commercial application) is outside of warranty:

In order to ensure the normal service life of the charging station and reduce risk, maintenance must be performed every 12 months. The maintenance and installation of the equipment must be completed by a  licensed electrician. Visit ocularcharging.com.au 10 book your service. The product should be placed at an ambient temperature of -25C~+55C in relative humidity of no more than 95%. The air should not contain acids, alkalis, or other corrosive and explosive gases.

Ocular Charging Stations are subject to stringent quality inspections. From the day of purchase, any problem quality can be reflected to the dealer within two years. Any direct damage or malfunction caused by neglect, incorrect use, installation, usage, repair by the users or natural damage are not covered by the warranty.

MANUFACTURER Ocular Charging.
ocularcharging.com.au
sales@ocularcharging com.au

ocularcharging.com.au
sales@ocularcharging.com.au
1300912 650

Ocular Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals