Optoma D2 Smart Laser Projection TV User Manual

android tv

Safety instructions

❖ Please keep the product in horizontal position. Do not place anything on the top of the TV Stick.
❖ Please use the power adapter provided by the manufacturer, Do not use the power adaptor if it is damaged.
❖ Please avoid to touch the power adapter with wet hands.
❖ To avoid any potential risk of electrical shock or damage do not disassemble or modify the TV Stick.
❖ Please keep the TV Stick away from any heat sources to avoid damage. The device should be keep in a dry and well-ventilated area away from dust that may cause fire or electric shock
❖ Please promptly shut down and unplug the device power adapter if it begin emitting smoke or any unpleasant odors.
❖ Please unplug the device power adapter when not in use for a long periods of time.

Accessory List

Please open the package and check the following accessories:

TV Stick xl    Remote Control xl   Power Adapter xl (Option)

User Manual xl    USB Cable xl     HDMI Cable xl

Hardware Structure

• Top Panel                                           • Bottom Panel

• Left Panel                                            • Right Panel

• Front Panel                                          • Rear Panel

1. USB
2. LED indicator
3. HDMI
4. Reset

Remote Control

| TV dongle| Projector
---|---|---
1| Power| Power
2| Google Assistant| —-
3| Up| Up
4| Left| Left
5| OK| OK
6| Right| Right
7| Down| Down
8| Back| Back
9| Home| Source
10| Apps| Menu
11| Voice-| Voice-
12| Voice+| Voice+
13| NETFLIX| —-
14| Prime Video | —-
15| Switch/Projector

Instructions

1.Indicator Light: Pressed any keys that indicator light will flash; When Low voltage that indicator light will flashes quickly.
2.Bluetooth Pairing:
Pressed the “OK”+ “Volume-“keys together on your Remote Control for 10 seconds
3.Google Assistant : Press the Google Assistant button on your remote to quickly search 500,000+ movies and shows, get recommendations to match your mood, control smart home devices, and more.

[ Note ] : Functions of the remote control maybe different for different Apps, you may need to use an external mouse to operate it.

System Connection

Please refer to below pictures and instructions to connect TV Stick

Note: Please turn off all equipment (such as Projector Stick and Projector power) before connecting.

1. USB
2. HDMI
3. USB port

Steps1 Connection with TV set

Plug the Projector Stick into the Projector’s HDMI port.

Step2 Connection with Power

Use the power adapter to connect the Stick and Projector set. Plug the power adapter into A/C outlet. If Projector set has a powered USB port, it can also plug the micro-USB cable directly into the Stick port.

Note: Some USB ports don’t provide enough continuous power. You need to connect with A/C power outlet through power adapter.

Network Setting

Enter Settings→Network to turn on Wi-Fi and connect an available Wi-Fi network with correct password.

Technical Specifications

4K2K@60fps, H.264 AVC  4K2K@30fps, MPEG1/2 and other video formats.
Audio format| MPEG1/2, MP3, AAC-LC,AAC-HE, AC3,E-AC3 and other audio formats
Network| Wi-Fi 2.4G/5 G Hz 802.11a/b/g/n/ac Bluetooth 4.2 BR+EDR+BLE
Operation temperature| 0°C~40°C
Power| Input: AC100-240V 50/60Hz
Output: DC 5V/1.5A
Power consumption| <5W

Troubleshooting

socket is normal.
TV with images without Voice| TV Stick MUTE state| Please press mute button to restore volume
Volume is too low| Turn up the volume
Fail to connect the network| Wi-Fi closed or the signal is too weak| Please restart the Wi-Fi or adjust the position of Router
Controller failure| Remote is not paired correctly to the TV Stick| Please re-pairing
Remote control is with low battery| Please change the batteries
Remote control is broken| Please send it to the local maintenance station for checking

FCC Statement (This statement is for TV stick)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ES| LU| RO| CZ| FR
HU| SI| DK| HR| BE
BG| DE| EE| IE| EL
IT| CY| LV| LT| SK
MT| NL| AT| PL| PT
FI| SE| UK| TR| NO
CH| IS| LI| |

ISED Statement
English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

5.2 GHz band is restricted to indoor use only (Except when communicating with 5.2GHz high power base stations or relay stations). 5.3 GHz band is restricted to indoor use due to the Radio Law.

Product Name: Network Media Players
Model No.: HK0202
Input: 5V 1.5A
MADE IN CHINA
FCC ID: SUZ-WB02
IC: 5923A-WB02
Manufacturer: Shenzhen SDMC Technology Co., Ltd.
Manufacturer Add.:19/F, Changhong Science & Technology Mansion, No.18, Keji South 12th Road, Nanshan District, Shenzhen, China.

FCC Statement (This statement is for the remote control)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Name of remote control: Remote Control Model
No.: B016P
FCC ID: SUZ-B016P
IC: 5923A-B016P
Supply voltage: 2.2-3.6V
Infrared carrier frequency: 38.0±0.5KHz
Bluetooth carrier frequency: 2.400GHz~2.4835GHz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>