OCULAR IOCAP06C-22 4G IQ Dual Port Tower User Guide

June 12, 2024
OCULAR

Ocular Dual Tower:
How to Guide

OCULAR IOCAP06C-22 4G IQ Dual Port Tower

IOCAP06C-22 4G IQ Dual Port Tower

  1. Press the button on the side that you want to plug in to These are buttons on either side of the tower which tell the charger which plug to provide power to.

  2. On the screen, you should see either “A” or “B” light up, depending on the side on which you pressed the button.

  3. Once you have the correct side selected, plug your vehicle into the charger.

  4. Follow the next section depending on the setup of the charger and if it is OCPP enabled.

  5. If OCPP enabled, please start the charging session according to the OCPP provider’s guidelines.
    • To stop your charging session, follow the OCPP provider’s guidelines.

  6. If OCPP disabled, and the charger is on plug and charge, the charging session will start automatically.
    • To stop your charging session, press the same selector button.

  7. If OCPP disabled, and the charger is on RFID authentication, you will have to tap your RFID card to start your charging session.
    • To stop your charging session, tap the RFID card again.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals