MUSETEX K2 PC CASE Computer Gaming Case Installation Guide

MUSETEX K2 PC CASE Computer Gaming Case

Product Information

Specifications

• Model : K2
• Dimensions (W x H x D): 178mm x 420mm x 238mm
• Max GPU Length: 360mm
• Max CPU Cooler Height: 178mm
• Max PSU Length : 240mm
• Supported Radiator Sizes: 120mm, 140mm, 240mm, 280mm, 360mm
• Supported Fan Sizes: 120mm, 140mm

Product Usage Instructions

Step 1: Connection of fan rotation

1. Identify the fan rotation cables.
2. Connect the fan rotation cables to the corresponding fan headers on the motherboard.

Step 2: Connection of fan ARGB lights

1. Identify the fan ARGB light cables.
2. Connect the fan ARGB light cables to the corresponding ARGB headers on the motherboard.

RESET SW Connection
Connect the RESET SW cable to the RESET SW header on the motherboard.

• Type-C Connection
  Connect the Type-C cable to the Type-C header on the motherboard.

• I/O Panel Connection
  Connect the I/O Panel connectors to the corresponding headers on the motherboard.

• For PSU/PCI Installation
  Follow the manufacturer’s instructions to install the PSU and PCI devices.

• For SSD/Motherboard Installation
  Follow the manufacturer’s instructions to install the SSD and motherboard.

• For HDD Installation
  Follow the manufacturer’s instructions to install the HDD.

• Cable Management
  Arrange and secure the cables using cable management techniques to ensure a clean and organized setup.

• Fan Installation
  Follow the manufacturer’s instructions to install the fans.

Case Features

1. Tempered glass
2. Main frame
3. 1/0 Port
4. Metal side panel
5. Hard disk bracket
6. PSU dust filter
7. Fans
8. PSU Position
9. Magnetic dust mesh
10. SSD slot

Case Specifications

• Maximum CPU cooler height : 178mm
• Maximum GPU length: 420mm
• Maximum PSU length: 238mm

Fan Compatibility

• Top : 3x120mm/2x140mm
• Middle : 3x120mm
• Dear : 10mm 110mm

Radiator Compatibility

• Top : 240mm/280mm/360mm
• Rear : 120mm/140mm

Fan and radiator installation capacity

Tips : For better heat dissipation, if you use a radiator, please match the original fans.

Radiator Compatibility

• Top: 240mm/280mm/360mm
• Rear: 120mm/140mm

Disassembly Steps
Please protect the edges and corners of the tempered glass! Don’t hit the corners, otherwise, the glass is likely to shatter. Pull out with force.

Motherboard installation

NOTE: For ease of transport and to prevent the product from being damaged,we pre-installed the fans on the chassis. If your I/O shroud of the motherboard is too high, you can remove the rear fan (as shown in 1) first before installing which will be more convenient for you.

Motherboard Compatibility: ATX / Micro-ATX / Mini-ITX.

• Step 1: Connection of fan rotation
  Please connect the interfaces of the same color!

• Step 2: Connection of fan ARGB lights
  Please connect the interfaces of the same color!

1. Connect the fan’s 5V3PIN cable to your motherboard and download the ARGB software that corresponds to it. (For software arrand pa purchase the official webpage of the  

Note : Not applicable to RGB 12V 4PIN. if the motherboard does not have 5V 3PIN, you can purchase a converter to use it.

*For a more uniform and beautiful pc build, it is recommended to purchase additional fans from MUSETEX.

l/O panel connection

l/O panel

1. Power Button
2. RESET
3. USB 3.0
4. Headphone
5. MIC
6. Type-C

Screw Kit

Used for

• A. PSU/PCI
• B. SSD / Motherboard
• C. HDD
• D. Cable Management
• E. Fan screws

Power Supply Installation

PSU is not included in the package.

SSD/HDD Installation

Supporting to install
2xHDD+2xSSD or 1xHDD+3xSSD

PCI Card(s)/PCI-E/GPU Installation

Support and Service
If you have any questions or suggestions please email us at service@musetex.com we promise we will resolve the problem within 12 hours. Your problem will be answered within 24 hours if you contact Amazon customer service. For more information, please visit the musetex.com page.

Finally, thank you for purchasing MUSETEX- product.

Catalogs

Welcome to buy! MUSETEX.COM

eVatmaster Consulting GmbH Bettinastr. 30 60325 Frankfurt am Main, Germany contact@evatmaster.com

FAQ’s

What are the supported radiator sizes?

The supported radiator sizes are 120mm, 140mm, 240mm, 280mm, and 360mm.

What are the supported fan sizes?

The supported fan sizes are 120mm and 140mm.

What is the maximum GPU length?

The maximum GPU length is 360mm.

What is the maximum CPU cooler height?

The maximum CPU cooler height is 178mm.

What is the maximum PSU length?

The maximum PSU length is 240mm.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>