BRISTAN RD DISH Toilet Roll Holder Instruction Manual

BRISTAN RD DISH Toilet Roll Holder

Installation

Single Backplate Fitting

1. Establish the position for the accessory and mark out the fixing holes. (Fig.1)
2. Drill holes to suit and insert wall plugs if required.
3. Screw the fixing plate to the wall, with the back flat to the wall. (Fig.2)
4. Loosen off the grub screw (but do not remove) and place the accessory over the fixing plate with the grub screw at the bottom.
5. Tighten up the grup screw until the pillar is secure against the wall.
   NOTE: All centres should be measured and checked prior to drilling

Double Backplate Fitting

1. Establish the position for the accessory and mark out the fixing holes; it is recommended that the centre distance of the accessory assembly is checked prior to drilling.Drill holes to suit and insert wall plugs if required.
2. Drill holes to suit and insert wall plugs if required.
3. Screw the fixing plate to the wall, with the back flat to the wall. (Fig.2)
4. Loosen off the grub screw, but do not remove.

Towel Rail

1. Fit the towel rail to the end pillars and place them over the fixing plate with the grub screws at the bottom.
2. Tighten the grub screws untill the pillars are secure against the wall.

Shelf

1. Fit shelf into the brackets and secure in position by tightening the plastic screws in the pillars.
2. Check shelf for security.

Installation

Extending Mirror

1. Establish the position for the mirror and mark out the fixing holes.
2. Drill holes to suit and insert wall plugs if required.
3. Screw the fixing plate to the wall, with the back flat to the wall. (Fig.2)
4. Loosen off the grub screw (but do not remove) and place the accessory over the fixing plate with the grub screw at the bottom.
5. Tighten up the grup screws until the pillar is secure against the wall.
6. Screw mirror down onto the extending bracket and check for security.

NOTE: Depending on your accessory, the shape of the backplate (where supplied) may vary.

Wire Baskets

1. Establish the position for the mirror and mark out the fixing holes.
2. Check the position of the marked holes before drilling.
3. Drill holes to suit and insert wall plugs if required. Screw the fixing plate to the wall, with the back flat to the wall. (Fig.2)
4. Ensure that the brass threaded washers provided, sit between the accessory and the screw head, fit screws accordinglu, see (Fig.3)
5. Fit concealing caps over the screw heads and check basket for security.

A Masco Company
At Bristan, we want to make things as easy as possible for our Customers. That’s why we offer solid guarantees on all our products, effective from the date of purchase, to give you peace of mind. To start your free guarantee simply scan the QR code and register your product.

Alternatively visit www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273 where our expert team of advisors
will be able to offer you any help and advice.
For full guarantee terms and conditions visit www.bristan.com/service- centre/guarantees.

Bristan Group Ltd.
Birch Coppice Business Park Dordon Tamworth Staffordshire B78 1SG
Web: www.bristan.com
Email: enquire@bristan.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>