OCULAR LTE Single Phase EV Charging Station with 6m Type 2 Cable User Guide

LTE Single Phase EV Charging Station with 6m Type 2 Cable
User Guide

Ocular LTE Overview

Accessories of Tethered Model

Station Overview

Technical Parameters

Level 2 EV Charging Station

Instruction for Use

Make sure the wall box is connected to power

◆Hang the cable on the hook when it is not in use

Installation Guide

Wallbox Overview

Accessories of Universal Model

Overview

Level 2 EV Charging Station

+55°C
Enclosure Material: ABS+PC alloy| Enclosure Material: ABS+PC alloy
Start Mode: Button (default)| Start Mode: Button (default)

Instruction for Use

Illustration of Screen and LED

SINGLE PHASE

THREE PHASE

Note: The Ocular LTE will automatically restart when minor problems occur.
For serious failures, the system cannot automatically recover. In order to remind user of this failure, the system will automatically countdown 10 seconds to restart.

Safety Warning

Regularly check whether the charging station has visible damage.

• Make sure that all safety facilities are available at all times and are tested regularly to
• ensure they can operate normally. Visit ocularcharging.com.au for a yearly maintenance check according to Australian standards.
• If a ground fault occurs, it must be assumed that the cable carries voltage. Please confirm that there’s no high-voltage power in the system before inspecting the charging  station.
• Persons who install and use charging stations must obey the principles and regulations mentioned to ensure personal and equipment safety.
• Before powering on the device, please confirm that the device is properly grounded to avoid unnecessary accidents.
• All tools’ unnecessarily exposed metal parts should be insulated to prevent them from touching the metal frame to avoid short circuits.
• Do not modify, retrofit, or change any part by yourself under any circumstances.
• To ensure the service life and stable operation of the charging station, the operating environment should be kept clean as possible with a relatively stable temperature and  humidity. The charging station must not be used in a flammable environment or environments with volatile gas.
• Be sure to confirm that the input voltage, frequency, circuit breakers, and other conditions of the device meet the specifications before the device is powered on

Maintenance

Ocular LTE is only recommended for use in residential applications and use outside of this area (i.e. for commercial applications) is outside of warranty.

In order to ensure the normal service life of the charging station and reduce risk, maintenance must be performed every 12 months.
The maintenance and installation of the equipment must be completed by licensed electricians. Visit ocularcharging.com.au to book your service.

The product should be placed at an ambient temperature of -25C~+55C in relative humidity of no more than 95%. The air should not contain acids, alkalis, or other corrosive and explosive gases.

Ocular Charging Stations are subject to stringent quality inspections. From the day of purchase, any problem quality can be reflected by the dealer within two years.

Any direct damage or malfunction caused by neglect, incorrect use, installation, usage, repair by the users, or natural damage is not covered by the warranty.

MANUFACTURER
Ocular Charging
ocularcharging.com.au
sales@ocularcharging.com.au

References

• EV Charging Stations Australia | Electric Vehicle Charging Stations | Ocular Charging

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>