MEAN WELL 600W Ultra-High Peak Power Supply Instructions

: June 12, 2024
: MEAN WELL

Table of Contents

Features
Applications
Description
- Model Encoding
SPECIFICATION
Block Diagram
Function Manual
Installation Manual

MEAN WELL 600W Ultra-High Peak Power Supply Instructions

Symbol

Features

Universal AC input / Full range
Withstand 300VAC surge input for 5 seconds
Up to 350% peak power capability
Built-in constant current limiting circuit
Protections: Short circuit / Overload / Over voltage / Over temperature
Built-in cooling fan ON-OFF control
Built-in DC OK signal
Built-in remote sense function
Withstand 5G vibration
Oprating ) altitude ! up to 5000 meters(Note.5)
Output votage adjustable +15%(Avg.)
5 years warranty

Applications

Industrial automation machinery
Industrial control system
Mechanical and electrical equipment
Diagnostic or biological facilities
Test or measurement systems
Telecommunication equipment

GTIN CODE

https://www.meanwell.comsenice.GTIN.spx

Description

HRP-600N3 series is a 600W single output AC/DC ultra-high peak power supply. This series operates at
85~264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by the built-in fan with fan ON-OFF control, working for the temperature up to 70°C. Moreover, HRP-600N3 can provide 350% short-duration peak power for motor applications and electromechanical loads requiring much higher power during start-up.

Model Encoding

SPECIFICATION

MODEL| HRP-600N3-12| HRP-600N3-24| HRP-600N3-36| HRP- 600N3-48
---|---|---|---|---
OUTPUT| DC VOLTAGE| 12V| 24V| 36V| 48V
RATED CURRENT| 53A| 27A| 17.5A| 13A
CURRENT RANGE| 0 ~ 53A| 0 ~ 27A| 0 ~ 17.5A| 0 ~ 13A
RATED POWER| 636W| 648W| 630W| 624W
RIPPLE & NOISE (max.) **Note.2| 200mVp-p| 150mVp-p| 200mVp-p| 240mVp-p
VOLTAGE ADJ. RANGE| 10.2 ~ 13.8V| 21.6 ~ 28.8V| 28.8 ~ 39.6V| 40.8 ~ 55.2V
VOLTAGE TOLERANCE Note.3| ±1.0%| ±1.0%| ±1.0%| ±1.0%
LINE REGULATION| ±0.3%| ±0.2%| ±0.2%| ±0.2%
LOAD REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%
SETUP, RISE TIME| 1800ms, 50ms/230VAC            3600ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.)| 16ms/230VAC            16ms/115VAC at full load
INPUT| VOLTAGE RANGE Note.4| 85 ~ 264VAC           120 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF>0.94/230VAC            PF>0.98/115VAC at full load
EFFICIENCY (Typ.)| 88%| 88%| 89%| 89%
AC CURRENT (Typ.)| 7.6A/115VAC          3.6A/230VAC
INRUSH CURRENT (Typ.)| 35A/115VAC           70A/230VAC
LEAKAGE CURRENT| <2mA / 240VAC
****PROTECTION| ****OVERLOAD| Output power >105% rated for more than 5 seconds then shut down o/p voltage, re-power on to recover
Constant current limiting for output power >380% rated for more than 5 seconds and then shut down o/p voltage, re-power on to recover
OVER VOLTAGE| 14.4 ~ 16.8V| 30 ~ 34.8V| 41.4 ~ 48.6V| 57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION| DC OK SIGNAL| PSU turn on : 3.3 ~ 5.6V ; PSU turn off : 0 ~ 1V
FAN CONTROL (Typ.)| Load 35±15% or RTH2≧50℃ Fan on
****ENVIRONMENT| WORKING TEMP.| -40 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
OPERATING ALTITUDE Note.5| 5000 meters
****SAFETY & EMC (Note 6)| SAFETY STANDARDS| UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, AS/NZS 62368.1 approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC     I/P-FG:2KVAC     O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
****EMC EMISSION| Parameter| Standard| Test Level / Note
Conducted| BS EN/EN55032| Class B
Radiated| BS EN/EN55032| Class B
Harmonic current| BS EN/EN61000-3-2| Class A
Voltage Flicker| BS EN/EN61000-3-3| —–
****EMC IMMUNITY| BS EN/EN55035 , BS EN/EN61000-6-2(BS EN/EN50082-2)
Parameter| Standard| Test Level / Note
ESD| BS EN/EN61000-4-2| Level 3, 8KV air; Level 2, 4KV contact
RF field| BS EN/EN61000-4-3| Level 3, 10V/m
EFT/ Burst| BS EN/EN61000-4-4| Level 3, 2KV
Surge| BS EN/EN61000-4-5| Level 4, 4KV/Line-FG; 2KV/Line-Line
Conducted| BS EN/EN61000-4-6| Level 3, 10V
Magnetic Field| BS EN/EN61000-4-8| Level 4, 30A/m
Voltage Dips and Interruptions| BS EN/EN61000-4-11| 95% dip 0.5 periods, 30% dip 25 periods,95% interruptions 250 periods
****OTHERS| MTBF| 1380.2K hrs min.     Telcordia TR/SR-332 (Bellcore) ;   191.8K hrs min.   MIL-HDBK-217F (25℃)
DIMENSION| 21810561.5mm (LWH)
PACKING| 1.39Kg;8pcs/12.1Kg/1.58CUFT
****NOTE**|

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor
Tolerance : includes set up tolerance, line regulation and load regulation.
Derating may be needed under low input voltages. Please check the derating curve for more details.
The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com )※ Product Liability Disclaimer：For detailed information, please refer to https://[www.meanwell.com/serviceDisclaimer.aspx](http://www.meanwell.com/serviceDisclaimer.aspx)

Block Diagram

Derating Curve

Block Diagram

Output Derating VS Input Voltage

Function Manual

Pav: Average output power (W)
Py : Peak output power (W)
Pas : Non-peak output power (W)
Patea : Rated output power (W)
t : Peak power width(sec)
T: Period(sec)

$Peak output power $W$$