TrueFree T3 Wireless Earbuds User Manual

TrueFree T3 Wireless Earbuds

Pairing

1. Please open the cover of the charging box, the two earphones will automat-ically turn on, and then enter the state of searching for mutual matching.
2. When the green light of the master earphone flashes slowly and the green light of the slave earphone stays on, the pairing of the left earphone and the right earphone is successful at this time, and the earphones enter the pairing state.
3. Turn on the device Bluetooth, then select TRUEFREE T3 from the Bluetooth list to complete the pairing.

Reset

1. Please take the two earphones out of the charging box.
2. Then, when the earphones are turned on, click the touch buttons of the two earphones continuously 7 times at the same time until the green indicators of the two earphones are on for 5 seconds, and the reset is complete.
3. Next, please put the two earphones back into the charging box, then close the cover of the charging box and open it again. At this time, the earphones are activated.

Wearing

1. Identify the left earphone and the right earphone.
2. Adjust the earphones to fit your ears.

Product Diagram

Controls

Q&A

Q1: When the charging box is charging the headset, how does the indicator light of the headset display?
When the earphones are put into the charging box and then the cover of the charging box is closed, the charging box will charge the earphones at this time, and the indicator light of the earphones will display the following two states.

1. The headset is charging – the green light stays on for about 10 seconds and then goes out.
2.  The headset is fully charged – green light off.

Q2: When the user is charging the charging box, how does the indicator light of the charging box display?
When the external power supply is charging the charging box, the indicator light of the charging box will have the following two states according to the charging power:

1. When the charging box is not fully charged, the red light flashes.
2. When the charging box is fully charged, the red light is always on.

Q3: How to charge the charging box?

1. Connect the Type-C charging adapter to charge it (charging current does not exceed 1A).
2. When not in use for a long time, charge it once at least every three months.

Q4: Why are the earphones still connected to the phone when they are put back to the charging case and the case lid is closed?

1. Check whether the charging case has battery power. If it has run out of battery, closing it will not disconnect the earphones from the device.
2. Please make sure that the earphones are correctly placed in the charging box, and the charging metal sheet and PIN pins are clean. Please use a soft cloth to clean the contact points on the earphones and the charging case.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>