ZKTeco FHT2300 Series Full Height Turnstile User Manual

ZKTeco FHT2300 Series Full Height Turnstile

Product Information

• The Full Height Turnstile Series is a range of access control turnstiles manufactured by ZKTeco. The applicable models in this series include FHT2300 Series, FHT2300D Series, FHT2400 Series, and FHT2400D Series. This user manual is applicable to all these models. The manual version is 1.3, and it was last updated in March 2022.
• ZKTeco is the registered trademark of the company that produces these turnstiles. Other trademarks mentioned in this manual belong to their respective owners.
• This manual contains important information on the operation and maintenance of the ZKTeco equipment. The copyright for all the documents and drawings related to the supplied equipment belongs to ZKTeco. The manual cannot be copied or shared without the prior written consent of ZKTeco.
• It is necessary for the operating and maintenance personnel to thoroughly understand the design and receive adequate training before operating and maintaining the turnstile. Safety instructions provided in this manual must be strictly followed for safe operation.
• In case of any conflict between the terms and conditions of this manual and the contract specifications or related documents, the contract conditions/documents shall prevail.
• ZKTeco does not provide any warranty or guarantee regarding the completeness of the information in this manual or any amendments made to it. The user assumes all risks associated with using the information provided in this manual.
• ZKTeco shall not be liable for any incidental, consequential, indirect, special, or exemplary damages arising out of or relating to the use of this product.
• For further details and updates, please visit ZKTeco’s official website: www.zkteco.com.

Product Usage Instructions

• Before operating the Full Height Turnstile, it is essential to read this user manual in its entirety. If any part of the manual seems unclear or incomplete, please contact ZKTeco for clarification before proceeding with the operation and maintenance of the turnstile.
• Ensure that the operating and maintenance personnel are fully familiar with the design and have received thorough training in operating and maintaining the turnstile. This is crucial for satisfactory operation and maintenance.
• Follow the safety instructions provided in the manual to ensure safe operation of the turnstile.
• Please note that the images shown in this manual are for illustrative purposes only and may not exactly match the specific model you are using.

Thank you for choosing our product. Please read the instructions carefully before the operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only.
For further details, please visit our Company’s website www.zkteco.com.

Copyright

Copyright © 2022 ZKTECO CO., LTD. All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the “Company” or “ZKTeco”).

Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their respective owners.

Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco-supplied equipment vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without express written permission of ZKTeco.

• The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact ZKTeco before starting the operation and maintenance of the said equipment.
• It is an essential pre-requisite for satisfactory operation and maintenance that the operating and maintenance personnel are fully familiar with the design and that the said personnel have received thorough training in operating and maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment that personnel has read, understood and followed the safety instructions contained in the manual.
• In case of any conflict between terms and conditions of this manual and the contract specifications, drawings, instruction sheets or any other contract-related documents, the contract conditions/documents shall prevail. The contract-specific conditions/documents shall apply in priority.
• ZKTeco offers no warranty, guarantee or representation regarding the completeness of any information contained in this manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without limitation, any warranty of design, merchantability or fitness for a particular purpose.
• ZKTeco does not assume responsibility for any errors or omissions in the information or documents that are referenced by or linked to this manual. The entire risk as to the results and performance obtained from using the information is assumed by the user.
• ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.
• This manual and the information contained therein may include technical, other inaccuracies or typographical errors. ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend or modify the information contained in the manual from time to time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment. The said additions or amendments are meant for improvement /better operations of the machine/unit/equipment and such amendments shall not give any right to claim any compensation or damages under any circumstances.
• ZKTeco shall in no way be responsible (I) in case the machine/unit/equipment malfunctions due to any non-compliance of the instructions contained in this manual (ii) in case of operation of the machine/unit/equipment beyond the rate limits (iii) in case of operation of the machine and equipment in conditions different from the prescribed conditions of the manual.
• The product will be updated from time to time without prior notice. The latest operation procedures and relevant documents are available on http://www.zkteco.com
• If there is any issue related to the product, please contact us.

ZKTeco Headquarters

Address ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
Phone +86 769 – 82109991
Fax +86 755 – 89602394

• For business-related queries, please write to us at: sales@zkteco.com.
• To know more about our global branches, visit www.zkteco.com.

About the Company

ZKTeco is one of the world’s largest manufacturers of RFID and Biometric (Fingerprint, Facial, Fingerprint) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks. Our security solutions are multi-lingual and localized in over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-certified manufacturing facility, we control manufacturing, product design, component assembly, and logistics/shipping, all under one roof. The founders of ZKTeco have been determined for independent research and development of biometric verification procedures and the productization of biometric verification SDK, which was initially widely applied in PC security and identity authentication fields. With the continuous enhancement of the development and plenty of market applications, the team has gradually constructed an identity authentication ecosystem and smart security ecosystem, which are based on biometric verification techniques. With years of experience in the industrialization of biometric verifications, ZKTeco was officially established in 2007 and now has been one of the globally leading enterprises in the biometric verification industry owning various patents and being selected as the National High tech Enterprise for 6 consecutive years. Its products are protected by intellectual property rights.

About the Manual
This manual introduces the operations of Full Height Turnstile Series. All figures displayed are for illustration purposes only. Figures in this manual may not be exactly consistent with the actual products. Features and parameters with ★ are not available in all devices.

Document Conventions
Conventions used in this manual are listed below:

GUI Conventions

For Software

Convention| Description
Bold font| Used to identify software interface names e.g. OK , Confirm , Cancel.
>  | Multi-level menus are separated by these brackets. For example, File

Create > Folder.
For Device
Convention| Description
< >| Button or key names for devices. For example, press .
[ ]| Window names, menu items, data table, and field names are inside square brackets. For example, pop up the [New User] window.
/| Multi-level menus are separated by forwarding slashes. For example, [File/Create/Folder].

Symbols

Product Introduction

Model Number and Access Control

Access Model| No| C3-200 with two KR101E reader| inBIO260 with two FR1200/ID reader
---|---|---|---
FHT2300| √|  |
FHT2311|  | √|
FHT2322|  |  | √
FHT2400| √|  |
FHT2411|  | √|
FHT2422|  |  | √

Structures and Dimensions

• FHT2300 series and FHT2400 series has stainless steel casing, which provides corrosion resistance and durability.
• FHT2300’s appearance and dimensions are as shown in figure 1-2A:
• FHT2400’s appearance and dimensions are as shown in figure 1-2B:

Mechanical System of FHT2300 &FHT2400 Series

• The mechanical system of the full-height turnstiles includes a mainframe box and a frame.
• The direction indicator, core, control panel, access controller and lock are installed in the mainframe box. The core component mainly consists of two solenoids, a spring and a transmission mechanism. The frame supports the entire mainframe box.

Electronic Control System
The electronic control system of the full-height turnstile is composed of reader, control panel, access controller, direction indicator, speaker, and transformer.

• Reader: The reader reads the data from the card and sends it to the controller.
• Control panel: The control panel is the system’s control center that receives signals from the controller. After the signals have been processed by the control panel, the control panel will deliver commands to the indicator.
• Direction indicator: This indicator displays the current status of the sign at the channel, and directs the pedestrian to pass the channel.

The Working Principle of Full Height Turnstiles

1. After the power is turned on, the system will perform a self-check. If no fault is detected, the device will operate as usual. If a fault is detected, the system will display the related messages on the LCD screen. This can be useful for error checking and troubleshooting.
2. When the reader detects a valid signal, the buzzer will give pedestrians a voice prompts to remind pedestrians have been successful credit card. And then, the reader sends signals to the access controller to request permission to pass through the passage. After the access controller send the signals to the control panel, the control panel will send out a pass.
3. After receiving the signal from the access controller, the control panel sends signals to the direction indicator and solenoid. Then the direction arrow will turn green. Also the solenoid will loose that the pedestrian can push the rod to pass the passage.

Technical Specifications

FHT2400: L=1400, W=1370, H=2200

Communication Interface| Relay
Input Control Signal| Switching signal
Working Environment| Indoor/Outdoor (if sheltered)
Temperature| -28 °C to 60°C
Input Voltage| AC 100 – 120V/200 – 240V, 50 – 60Hz
Output Voltage| DC 24V
Relative Humidity| 25% to 75%
Pass Speed| RFID: Maximum 30/minute Fingerprint: Maximum25/minute Face: Maximum 15/minute Vein: Maximum 15/minute

Wiring Diagram

Check the circuit according to the following wiring diagram:

DIP Switch

Setting the turnstile opening duration

Opening duration

Bit setting| Duration| Bit setting| Duration
111| 5s| 011| 30s
110| 10s| 010| 40s
101| 15s| 001| 50s
100| 20s| 000| 60s

Note: The turnstile opening duration is set to 5s by default.

Setting the turnstile direction indicator

Direction indicator

Bit setting| Direction
00| passing is allowed in both directions
01| one way traffic ,right passing is allow
11| one way traffic ,left passing is allow
10| both ways forbidden

Setting the memory function

Memory function

Bit setting| Mermory
00| unable mermory function
10| allow mermory function

Setting the testing mode

Testing mode

Bit setting| Solenoid automatically open and close
0| unable auto testing
1| allow auto testing

Product Maintenance

• Cabinet Maintenance
  The cabinet is made of 304 stainless steels. So after a long period of operation, its surface may have some stains. It can use gauze to clean the Cabinet. In order to protect the lines of surface, please wipe along the lines direction. It’s best to polish and wax.

• Movement Maintenance
  Cut off power supply before maintenance. Open the barriers and clean the dust on surface, add lubricating oil to the transmission mechanism. Check and tighten others connection parts.

• Power Maintenance
  Cut off power supply before maintenance. Check whether the plug is loose, if loose, it needed to tightly it. Please do not replace the connection position at random. Check whether the external power supply is exposed and wrap it. Check whether there is any leakage, found to be timely processing. Check the technical parameters at the interface are regular and replace the old electronic components in time.
  ( Attention: Above full height turnstile maintenance must be maintained by professional personnel. Especially the movement and the electric control part, first cut off the power supply, ensure the operation safety. )

ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
Phone: +86 769 – 82109991
Fax: +86 755 – 89602394
www.zkteco.com
Copyright © 2022 ZKTECO CO., LTD. All Rights Reserved.

References

• ZKTeco | Biometrics and Computer Vision

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>