tp-link Archer TX20UH Wireless USB Adapter Installation Guide
- June 3, 2024
- tp-link
Table of Contents
tp-link Archer TX20UH Wireless USB Adapter Installation Guide
Connect to a Computer
Note: It is recommended to connect the adapter to a USB 3.0 ( ) port.
Option 1: Directly
Option 2: Via the USB Extension Cable (if provided)
Install Driver
- Go to My Computer or This PC.
Double click the TP-Link disk then run SetupInstall.exe to install driver
Join a Wireless Network
- Click the network icon on the taskbar.
- Select your Wi-Fi network, click Connect and enter the password when prompted.
Troubleshooting
If you have problems during the installation, please refer to the following online FAQs.
T1. Can’t find the hardware version of the adapter:
https://www.tp-link.com/faq-46.html
T2. Can’t find or connect to the wireless networks:
https://www.tp-link.com/faq-2253.html
T3. Can’t install the driver:
https://www.tp-link.com/faq-2252.html
Support
For technical support, replacement
services, user guides, and other
information, please visit
https://www.tp-link.com/support, or
simply scan the QR code.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
- Keep the device away from water, fire, humidity or hot environments.
- This product can be powered only by power supplies that comply with Power Source Class 2 (PS2) or Limited Power Source(LPS) of IEC 62368-1
References
- Difficulties Experienced While Installing a TP-Link Wireless Adapter
- Why cannot I connect to my wireless network | TP-Link
- How to find the hardware version on a TP-Link device
- TP-Link Product Support - Wireless Networking Equipment Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>