VALBERG CNF 338 C X625C Combined Fridge User Manual

VALBERG CNF 338 C X625C Combined Fridge

![VALBERG-CNF-338-C-X625C-Combined-Fridge-product-image- latest]](https://manuals.plus/wp-content/uploads/2023/08/VALBERG-CNF-338-C -X625C-Combined-Fridge-product-image-latest.png)

Product Information

The VALBERG refrigerator is a reliable and easy-to-use appliance that comes with a 2-year warranty. It is manufactured with high-quality materials to ensure durability and performance. The  refrigerator features a refrigerating chamber and a freezing chamber, providing ample storage space for your food items. It also includes various compartments such as shelves, fruit and vegetables  box, meat and fish box, drawer, and door tray for organized storage. The refrigerator is designed to meet impeccable standards and is recommended by ELECTRO DEPOT.

Product Usage Instructions

Preview of the Appliance:
The VALBERG refrigerator consists of the following components:

1. Door switch
2. LED light
3. Shelf
4. Fruit and vegetables box
5. Meat and fish box
6. Drawer
7. Door tray

Note: The actual configuration may vary depending on the physical product or distributor’s statement.

Using the Appliance – Proper Use of Refrigerators:
Placement:

• Before use, remove all packing materials, including bottom cushions, foam pads, and tapes inside the refrigerator. Also, tear off the protective film on the doors and the refrigerator body.
• Avoid placing the refrigerator near heat sources or in direct sunlight.
• Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
• Avoid spraying or washing the refrigerator. Do not place it in moist areas that are prone to water splashes, as it may affect the electrical insulation properties.
• Ensure the refrigerator is placed in a well-ventilated indoor area with a flat and sturdy ground. Adjust the wheels for leveling if needed.

Installation:

• The refrigerator should be installed independently and should not be used as a built-in appliance. Installation as a built-in may cause problems and void the basic product warranty.
• Leave a top space of at least 30cm above the refrigerator.
• Place the refrigerator against a wall with a free distance of more than 10cm to facilitate heat dissipation.

For more detailed usage instructions, troubleshooting, and maintenance information, refer to the user manual provided with the product.

Thank you for choosing VALBERG!

WARRANTY CONDITION
This product has a 2-year warranty as of the date of purchase, covering any fault resulting from a manufacturing or material defect. This warranty does not cover defects or damage resulting from incorrect installation, improper use or abnormal wear of the appliance.
upon presentation of the sales receipt.

Thanks!
Thank you for choosing this VALBERG product. Chosen, tested and recommended by ELECTRO DEPOT, the products of the VALBERG brand are easy to use, reliable and of an impeccable standard.
Thanks to this appliance, you can be sure that each use will bring you satisfaction.
Welcome to ELECTRO DEPOT.
Visit our website: www.electrodepot.fr

Preview of the appliance

Description of the appliance

1. Door switch
2. LED light
3. Shelf
4. Fruit and vegetables box
5. Meat and fish box
6. Drawer
7. Door tray

The picture is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

Refrigerating chamber

• The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and other food consumed in the short term, suggested storage time 3 days to 5 days.
• Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
• Foods are recommended to be sealed up before putting into the refrigerator.
• The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy use.

Freezing chamber

• The low temperature freezing chamber may keep food fresh for a long time and it is mainly used to store frozen foods and making ice.
• The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be consumed in short term.
• Chunks of meat are preferably to be divided into small pieces for quick freezing and easy access. Please be noted food shall be consumed within the shelf time.
• Drawers, food boxes, shelves, etc. placed according to the position in the picture are the most energy efficient.

Using the appliance

Proper use of refrigerators
Placement

Before use, remove all packing materials, including bottom cushions, foam pads and tapes inside of the refrigerator; tear off the protective film on the doors and the refrigerator body.

Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.

The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust the wheel for levelling if unstable).

This refrigerator needs to be installed independently and cannot be used as a built-in. Otherwise, it will cause problems such as failure to install into the cabinet, the performance and life of the product are reduced. And the manufacturer does not provide basic product warranty.
The top space of the refrigerator shall be greater than 30cm, and the refrigerator should be placed against a wall with a free distance more than 10cm to facilitate heat dissipation.

Spare enough space for convenient opening of the doors and drawers.

PRECAUTION!
Before installation or adjusting of accessories, it shall be ensured that the refrigerator is disconnected from power. Precautions shall be taken to prevent fall of the handle from causing any personal injury.

Levelling feet
Schematic diagram of the leveling feet

The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

Adjusting procedures:

• Turn the feet clockwise to raise the refrigerator;
• Turn the feet counterclockwise to lower the refrigerator;
• Adjust the right and left feet based on the procedures above to a horizontal level.

Door Right-Left Change

| List of tools to be provided by the user
---|---
| | Cross screwdriver| | Putty knife thin-blade screwdriver
List of tools to be provided by the user|
| 5/16’’ socket and ratchet| | Masking tape|
| | | | | | | |

• Please power off this appliance before conducting the operation. Remove all food from the door shelves.
• Remove the upper left hinge cover decorative cover, upper right hinge cover and upper right hinge, and disconnect the right signal line (signal line terminal 1, 2) at top of the box body.

• Remove the refrigerated door body (be careful not to lose small parts such as the shaft sleeve and stop on the door);
• Remove the middle hinge and remove the decorative cover of hinge hole on the other side.

• Remove the freezing door body (be careful not to lose small parts such as the shaft sleeve and stop on the door);
• Remove the hinge and adjust the angle. Remove and install the lower hinge shaft to the other side of the hinge, and install the modified lower hinge to the other side of the box.

Change the refrigerator door:

• Remove the cover plate of the upper end cover of the refrigeration door and the left decorative cover. Install the upper shaft sleeve and the signal line of the door body to the other side and cover the upper end cover plate. Take out the right decorative cover from the accessory bag and install it to the other side of the upper end cover.
• Remove the door self—locking, door stop and shaft sleeve of the refrigeration door, take out the left door self—locking from the accessory bag, install it on the left side of the lower end cover of the refrigeration door, change the door stop and shaft sleeve to the left side of the lower end cover of the refrigeration door.

Change the freezing door:

• Remove the shaft sleeve and cap of the upper end cover of the freezing door and install them at the left and right swap positions.
• Remove the door self-locking, door stop and shaft sleeve of the freezing door, take out the left door self-locking from the accessory bag, install it on the left side of the lower end cover of the freezing door, change the door stop and shaft sleeve to the left side of the lower end cover of the freezing door.

• Install the replaced freezing door on the lower hinge, then install the middle hinge and cover the hinge hole decorative cover.

• Remove the upper left hinge cover and upper left hinge from the accessory bag. Place the refrigerated door body on the middle hinge and install the upper left hinge. Connect the refrigerator top signal line 4 to the door body signal line 1, and connect the signal line 2 to the signal line 3. Finally, replace the hinge cover to the right side of the box body, the two inserts of the hinge decorative cover (as shown in the figure) shall be cut off).

Changing the Light

• This product contains a light source of energy efficiency class G.
• Light source in this product can only be replaced by qualified professionals.
• Please contact after-sales service if the light source fails.
• The light source shall be removed at the end of the product’s useful life, with sorting and recycling done separately.

| 1. Please take out the plug before removal.| | 2. Remove the lampshade with a screwdriver.
---|---|---|---
| 3. Take down the lamp panel.| | 4. Remove the connection terminal.

Starting

• After transportation, please let the product stay for more than 2 hours before turning on the power, otherwise it will lead to a decrease in cooling capacity or a damage to the product.
• Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in summer when the ambient temperature is high.
• Please pull out the plug in case of power failure or cleaning. Do not connect the freezer to power supply within five minutes to prevent damages to the compressor due to successive starts.

Energy saving tips

• The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
• Liners interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible

Structure and functions
Functions

Display screen

1. Refrigerating chamber temperature display area
2. Freezing chamber temperature display area
3. Quick cool icon
4. Quick freeze icon
5. Vacation icon
6. Lock icon

Operation button

• A Temperature setting button of refrigerating chamber
• B Temperature setting button of freezing chamber
• C Supercool/Super freezing button

Display

• When power is on the refrigerator for the first time, the whole display panel whill shine for 3 seconds. Then the display panel enters the normal display. The first time for using the refrigerator, the default set temperatures of refrigerating chamber, freezing chamber is 5°C/-18°C respectively.
• When the error occurs, the display panel shows the error code; during normal running, the display panel shows the set temperature of refrigerating chamber, freezing chamber.
• Under normal running, if there is no operation or opening door action within 30 seconds, the display panel will be locked, the light of display will go out after the locked state continued for 30 seconds.

Lock/Unlock

• In the non-locking state, press and hold the super-cool /super-freezer button for 3 seconds to enter the locked state and the lock buzzer will sound.
• In the locked state, press and hold the super-cool /super-freezer button for 3 seconds to enter the unlocked state and the unlocking buzzer will sound.
• After 30 seconds of no button operation, it will automatically enter the locked state, and the external display board with a music buzzer will sound the lock buzzer at the same time.
• The alarm sound release operation can be carried out in the locked state, and all other key operations must be carried out in the unlocked state.
• If the operation is in the locked state, an error buzzer will be displayed.

Temperature setting of refrigerating chamber

• Click the button to change the set temperature of refrigerating chamber, each click of temperature adjusting button of the refrigerating chamber, the set temperature will be reduced 1°C. The temperature setting range of refrigerating chamber is 2~8°C. When  the set temperature is 2°C, click the button again, the set temperature of refrigerating chamber will switch to 8°C.

Temperature setting of freezing chamber

• Click the button to change the set temperature of freezing chamber, each click of temperature adjusting button of the freezing chamber, the set temperature will be reduced 1 °C. The temperature setting range for freezing chamber is -24~ -16°C. When the temperature is -24 °C, click the button again, the set temperature of freezing chamber will switch to -16 °C.

Mode setting

• Long press the refrigeration temperature adjustment button (3s) to set/cancel the holiday mode
• When setting the holiday mode, the refrigeration is turned off, the refrigeration temperature display area is extinguished, and the freezing is automatically set to -18°C;
• Adjusting the refrigeration/freezing/super cool and super freezer buttons will exit the holiday mode.
• When exiting the holiday mode, the refrigeration set temperature will automatically return to the set temperature before the holiday mode; the freezing set temperature will automatically return to the set temperature before the holiday mode; enter the normal operation mode.

Super freeze mode

• Super cool and super freezer mode, press the super cool/super freezer button, the setting sequence is: super cool -> super freezer -> cancel
• When setting/cancelling the super cool mode, the corresponding super cool icon is on/off; when setting the super cool mode, the refrigeration is automatically set to 2°C;
• When exiting the super-cool mode, the set temperature of the refrigerating room will automatically return to the set temperature before the quick-cooling mode;
• When the super-freezer mode is set, the corresponding super-freezer icon is lit; when the super-freezer mode is set, the freezing is automatically set to -24°C;
• When exiting the super-freezer mode, the set temperature of the freezer compartment will automatically return to the set temperature before the super-freezer mode;
• Super cool mode automatically disabled for 6H.
• Super freezer mode automatically disabled for 24H.
• Recommended setting: refrigerated chamber 4 °C ,freezing chamber – 18°C.

NOTE
The super-freezer function is designed to maintain the nutritional value of the food in the freezer. It can freeze the food in the shortest time. If a large amount of food is frozen at one time, it is recommended that the user turn on the quick-freezing function and put the food in. At this time, the freezing speed of the freezer compartment is increased, which can quickly freeze the food, effectively lock the nutrition of the food, and facilitate storage.

• If the refrigerator door is open for 120 seconds without closing, the buzzer will alarm until the refrigerator door is closed; any key will cancel the buzzer alarm.

Fault indication

• The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though the refrigerator may still have cold storage function with the following faults, the user shall contact a maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.

Fault Code  : Fault Description

• E1 Temperature sensor failure of refrigerating chamber
• E2 Temperature sensor failure of freezing chamber
• E3 Temperature sensor failure of meat&fish zone
• E5 Freezing defrost sensor detection circuit error
• E6 Communication error
• E7 Ambient temperature sensor error

Useful information

Cleaning and maintenance
Overall cleaning

• Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving.
• Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent.
• The interior of the refrigerator should be cleaned regularly to avoid odor.
• Please turn off the power before cleaning interior, remove all foods, drinks ,shelves, drawers, etc. Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before turning on the power.
• For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterial accumulation in these areas.
• Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of the refrigerator or contaminated food.
• Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted detergent. Dry with a soft cloth or dry naturally.
• Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and then wipe dry.
• Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes), organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may damage the fridge surface and interior. Boiling water and organic solvents such as benzene may deform or damage plastic parts. Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect electrical insulation after immersion.

WARNING
Please unplug the refrigerator for defrost and cleaning.

Cleaning the glass shelf

• Remove the drawer on the glass shelf.
• Lift up the front of glass shelf about 60° and then pull out.
• Remove glass shelf and clean as needed.
• The reverse operation is for installation of glass shelf.

Defrosting

• The refrigerator is made based on the air-cooling system and this has automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnecting the appliance from power supply or by wiping with a dry towel.

Out of operation

• Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for several hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into the appliance.
• Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odor.
• Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and fix them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during movement shall be no more than 45°.
• The appliance shall run continuously once it is started. Generally, the operation of the appliance shall not be interrupted; otherwise the service life may be impaired.

Troubleshooting
You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department.

Failed operation

• Check whether the appliance is connected to power or whether the plug is in well contact
• Check whether the voltage is too low
• Check whether there is a power failure or partial circuits have tripped

Odor

• Odorous foods shall be tightly wrapped
• Check whether there is any rotten food
• Clean the inside of the refrigerator

Long-time operation of the compressor

• Long operation of the refrigerator is normal in summer when the ambient temperature is high
• It is not suggestible having too much food in the appliance at the same time
• Food shall get cool before being put into the appliance

Light fails to get lit

• The doors are opened too frequently
  Check whether the refrigerator is connected to power supply and whether the illuminating light is damaged

Doors cannot be properly closed

• Have the light replaced by a specialist
• The door is stuck by food packages
• Too much food is placed
• The refrigerator is tilted

Loud noise

• Check whether the floor is level and whether the refrigerator is placed stably
• Check whether accessories are placed at proper locations

Door seal fails to be tight

• Remove foreign matters on the door seal
• Heat the door seal and then cool it for restoration (or blow it with an electrical drier or use a hot towel for heating)

Water pan overflows

• There is too much food in the chamber or food stored contains too much water, resulting in heavy defrosting
• The doors are not closed properly, resulting in frosting due to entry of air and increased water due to defrosting

Hot housing
Heat dissipation of the built-in condenser via the housing, which is normal. When housing becomes hot due to high ambient temperature, storage of too much food or shutdown of the compressor is shut down, provide sound ventilation to facilitate heat dissipation.

Surface condensation
Condensation on the exterior surface and door seals of the refrigerator is normal when the ambient humidity is too high. Just wipe the condensate

Abnormal noise

• Buzz: The compressor may produce buzzes during operation, and the buzzes are loud particularly upon start or stop. This is normal.
• Creak: Refrigerant flowing inside of the appliance may produce creak, which is normal.

Climate classes

• Extended temperate:‘ this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C’; temperate: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C’;
• Subtropical:‘ this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C’;
• Tropical:‘ this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C’;

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>