BEA 10.1311 Widescan Adapter Kit Instruction Manual
- June 12, 2024
- BEA
Table of Contents
BEA 10.1311 Widescan Adapter Kit
Product Information
The LZR-WIDESCAN Adapter Kit includes the following components:
- 5 x Screws (10-24)
- Adapter Plate
- 10INDBRACKET
- 10MINIBRACKET
- 75.5939.02 LZR-WIDESCAN ADAPTER KIT 20230401
The Industrial Bracket is a universal industrial mounting bracket with the following features:
- Mounting face: 12” x 2.5”
- Adjustment locking screws
- Extendable adjustment
- Sensor mounting face
The Mini Industrial Bracket is a short universal industrial mounting bracket with the following features:
- Mounting face: 12” x 2.5”
- Adjustment locking screws
- Extendable adjustment
- Sensor mounting face
- Angle locking bolt
- Wire passage hole
The materials used for both brackets are carbon steel (powder coated black). The Industrial Bracket has an adjustment range of 20-36 inches and weighs 5.38 lbs. The Mini Industrial Bracket has an adjustment range of 6-12 inches (up to 4 inches may be cut off for shorter applications) and weighs 2.32 lbs.
Product Usage Instructions
- Prepare the existing bracket plates by drilling the identified holes to a diameter of 7/32. The holes to enlarge are indicated by red circles in the diagram.
- Mount the Industrial Bracket or Mini Industrial Bracket following the instructions in User’s Guide 75.5799.
- Install the Adapter Plate by positioning it on the Industrial Bracket plate and securing it with the provided screws. Once the Adapter Plate is secured to the Industrial Bracket, follow the sensor mounting instructions in User’s Guide 75.5916 or Quick-Start Guide 75.5917.
For further technical support or customer service, please contact:
- Tech Support & Customer Service: 1-800-523-2462
- General Tech Questions: techservices-us@BEAsensors.com
- Tech Docs: www.BEAsensors.com
KIT COMPONENTS
DESCRIPTION
If an industrial bracket (10INDBRACKET or 10MINIBRACKET) are required for the
desired application, the LZR®-WIDESCAN ADAPTER KIT must be used in conjunction
for compatible mounting.
See below for proper mounting sequence.
INSTALLATION
PREPARE INDUSTRIAL BRACKET
- Holes on the existing bracket plates must be enlarged to 7⁄32″ diameter to fit the Adapter plate.
- See below for identified holes to enlarge. Red circles are strictly for identifying purposes, not size indication.
MOUNT BRACKET
- Refer to User’s Guide 75.5799 for instructions on mounting the Industrial Bracket or Mini Industrial Bracket.
INSTALL ADAPTER PLATE
- Using the diagram to the right, position the adapter on the Industrial Bracket plate. Secure with provided screws.
- When the Adapter Plate has been secured to the Industrial Bracket, proceed with sensor mounting instructions in User’s Guide 75.5916 or Quick-Start Guide 75.5917.
Tech Support & Customer Service:
1-800-523-2462
General Tech Questions: techservices-us@BEAsensors.com
Tech Docs: www.BEAsensors.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>