DPR Motorized Core Holder XL User Manual
- June 4, 2024
- DPR
Table of Contents
Motorized
Core Holder XL
User Manual
Motorized Core Holder XL
Please keep the original packaging in case you need to return the unit.
If we receive the system in non-original packaging, the warranty may be void.
The XL unwinder is used to unwind the labels on a roll having a fixed 3”
internal diameter. The maximum external roll diameter allowed is up to 250 mm
(10”) while the maximum label width is up to 240 mm (9.45”).
An external power supply 100/240VAC – 2.5A at 24V allows an electronic circuit
to provide, through the tension arm, the speed and sense of rotation auto
adjustment.
INSTALLATION
STEP 1
Using the screws, install the outer disc on the unwinder core holder.
STEP 2
Attach the printer plate to the unwinder. Do not fasten the knobs for the
moment.
STEP 3
Place the printer on the plate using the guide rails.
STEP 4
Load the media roll and outside disk then tighten the knob.
STEP 5
Push the media under the tension arm and then feed it into the printer (look
at the printer’s manual on how to load media).
STEP 6
Make sure to align the unwinder with the printer and turn it on.
The system is ready to work.
Smart solutions for the labeling in Industry
Label rewinder, label unwinder, electronic label dispenser, and more…
| LABEL UNWINDER/REWINDER| SMALL LABEL UNWINDER/REWINDER| LABEL COUNTER
ROLL TO ROLL SYSTEM FOR LABEL PRINTERS| ROLL TO ROLL SYSTEM FOR EPSON
PRINTERS| ROLL TO ROLL SYSTEM FOR VIPCOLOR VP SERIES| ROLL TO ROLL SYSTEM FOR
PRIMERA LX SERIES
MATRIX REMOVER AND SLITTER| LONGITUDINAL LABEL SLITTER| EASY LABEL DISPENSER|
ELECTRONIC LABEL DISPENSER
SCORPIO SERIES: DIGITAL LABEL FINISHING SYSTEMS| GEMINI: DIGITAL DIE CUTTER
FOR SHEETS| VIRGO: DESKTOP DIGITAL FINISHING SYSTEM| MOTORIZED CORE HOLDER
UNWINDER/REWINDER
– FOR MORE INFO CONTACT YOUR RESELLER –
Documents / Resources
| DPR
Motorized Core Holder
XL
[pdf] User Manual
Motorized Core Holder XL, Motorized, Core Holder XL, XL Holder
---|---