CONRAD 2498550 Bicycle Wall Holder Frame Instruction Manual
- June 4, 2024
- CONRAD
Table of Contents
CONRAD 2498550 Bicycle Wall Holder Frame
Instructions
Intended use
The product is a bicycle wall holder/hook. Use the product to hold or hang
bicycles. Do not use the product to hang other objects than bicycles or for
physical exercise. The product must be installed permanently on a suitable
surface.
If you install the product outdoors, it must be protected from water, rain,
and snow.
If you use the product for purposes other than those described, the product
may be dam-aged.
Improper use can result in hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product.
Read the installation instructions carefully and store them in a safe place.
Make this product available to third parties only together with the
installation instructions.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery contents
- Wall holder
- 2x Anchor bolts
- 2x Screw nuts
- 2x Screw rings
- 2x Screw springs
- Installation instructions
Latest product information
Download the latest product information at
www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Symbols in this document
- The symbol warns of hazards that can lead to personal injury. Read the informa-tion carefully.
- The symbol warns of dangerous voltage that can lead to personal injury by elec-tric shock. Read the information carefully.
**Safety instructions
**
Read the installation instructions carefully and especially observe the safety information. If you do not follow the safety instructions and informa-tion on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guar-antee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Handling
- Sharp edges can result in cuts. Wear protective gloves while handling or installing the product.
- Moving parts can trap body parts. Keep fingers and other body parts away from moving parts.
User requirements
- The installation requires specialist knowledge. If the product is installed incorrectly, it can fall down and cause serious personal injuries. Instruct a specialist to install the product if you do not have the necessary knowledge.
- It may be difficult to hold and install the product at the same time. The product can fall down and cause injury. Ask a second person for help with the installation.
Drilling
When penetrating the surface (example: drilling or inserting fasteners), make
sure no cables or pipes are damaged. Inadvertently penetrating electric cables
causes the life-threatening danger of an electric shock! Check for concealed
wires and pipes before drilling or inserting fasteners.
Installation location and surface
- The product protrudes from the installation location. Passers-by may bump against the product and injure themselves. Select an installation location that reduces the risk of ac-cidents.
- Unsuitable installation surfaces can cause the product to fall down and result in serious personal injury. Select an installation surface that can permanently withstand the com-bined weight of the product and the load.
Installation materials
Wrong installation materials can cause the product to fall down and result in
injury. Se-lect installation materials including screws, wall plugs, bolts,
and studs that are suitable for the installation surface and that can
withstand the combined forces of leveraging ef-fect, weight of the product,
and load.
Do not overload
Overloading can cause the product to fall down or break and cause injury.
Never exceed the maximum permissible load given in the product specifications.
Check for loose components
Screws and bolts can become loose over time. The product can fall down and
cause in-jury. Check all screw fastenings at least every 3 months and tighten
them if loose.
Technical data
- Loading……………………………………. max. 30 kg
- Bicycle size………………………………. 61 – 74 cm (24 – 29”)
- Dimensions (W x H x D) (approx.) . 280 x 200 x 350 mm
- Weight (approx.) ………………………. 870 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited. This publication reflects the technical status at the
time of printing.
Copyright by Conrad Electronic SE.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>