VIMAR LINEA 30210.USBx Universal Italian Tandard P40 Socket Outlet Instruction Manual
- June 13, 2024
- VIMAR
Table of Contents
| LINEA | EIKON | ARKÉ | PLANA |
|---|---|---|---|
| 30210.USBx | 20210.USB | 19210.USB | 14210.USB |
SICURY 2P+T 16 A 250 V~ universal Italian standard P40 socket outlet, USB type
C 5 V 3 A output – 2 modules.
Read the instructions before installation and/or use.
The device should be used to charge mobile phones and all electronic devices
that can be charged from any standard USB type C socket outlet.
USB SOCKET OUTLET
FEATURES.
- Power supply: 250 V~ 50/60 Hz
- Power consumption: 185 mA at 250 V~
- Output voltage: 5.0 V d.c. (± 5%) ES1 and/or SELV
- Max output load: 3.0 A
- Output power: 15.0 W
- Average efficiency in active mode: 82%
- Efficiency with low load (10%): 73%
- Power with no load: 0.03 W
- Protection degree: IP20
- Device in class II
- Installation for CAT II overvoltage category
INSTALLATION RULES.
- Installation must be carried out by qualified persons in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.
- The device can be installed in a flush mounting box or surface mounting box and completed with Linea, Eikon, Arké, or Plana cover plates in dust-free places, protected from accidental impacts and away from heat sources.
- Before working on the system, cut off the power on the main switch .
- To facilitate connection, the power supply cables must come out of the terminal side.
The use of Arké in Fit version may require the use of spacer art. 19913.D.
IMPORTANT.
- An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream from the power supply.
- An SPD (surge protection device) must be installed upstream of the system to reduce the overvoltage category from III to II.
- Install the device at a height of no more than 2 m.
- The length of the connection cable to the electronic device must be no more than 3 m.
- The type C USB socket outlet is protected internally against overloads.
REGULATORY COMPLIANCE.
LV Directive. EMC directive. RoHS directive. ErP directive.
Standards CEI 23-50, EN 62368-1, EN 55032, EN 55035, EN 61000-3-2, EN
610003-3, EN IEC 63000.
(EU) Regulation for external power supply units no. 2019/1782.
REACH (EU) Regulation no.
1907/2006 –
Art.33. The product may contain traces of lead.
WEEE – Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this
means the product must not be included with other general waste at the end of
its working life. The user must take the worn product to a sorted waste
center, or return it to the retailer when purchasing a new one. Products for
disposal can be consigned free of charge (without any new purchase obligation)
to retailers with a sales area of at least 400 m 2 , if they measure less than
25 cm. An efficient sorted waste collection for the environmentally friendly
disposal of the used device, or its subsequent recycling, helps avoid the
potential negative effects on the environment and people’s health, and
encourages the re-use and/or recycling of the construction materials.
FRONT VIEW
N.B. Graphic representation of the Linea series. Position of terminals, wiring and functions also identical for Eikon, Arké and Plana.
**** xx210.USB 02 2303
Viale Vicenza, 14
36063 Marostica VI – Italy
www.vimar.com