BOTEX 5P Opto Split User Guide
- June 15, 2024
- BOTEX
Table of Contents
BOTEX 5P Opto Split
Product Information
Specifications:
- Supported protocol : DMX 512 and RDM
- Connections : 5-pin XLR
- Supply voltage : 230 V ~ 50 Hz
- Power consumption: 10 W
Product Usage Instructions
Safety Instructions:
It is important to follow these safety instructions to ensure the safe use of the product:
- Read and follow all safety advice and instructions provided in the manual.
- Keep the manual for future reference.
- If passing the product on to others, include this manual.
- Only use the device for its intended purpose, which is to split an RDM/DMX signal across separate outputs.
- Using the device for any other purpose or under different operating conditions is considered improper use and may result in personal injury or property damage.
- Do not let children play unattended with the electrical devices.
- Ensure that plastic bags, packaging, etc. are properly disposed of and are not within reach of babies and young children to avoid choking hazards.
- Children should not detach any small parts from the product as they could swallow them and choke.
- Avoid using liquid cleaners such as benzene, thinners, or flammable cleaning agents.
Features:
The Opto Split Pro 5P has the following features:
- DMX / RDM IN: Input for the DMX/RDM signal.
- DMX / RDM THRU: Output for passing through the DMX/RDM signal.
- OUT 1 – OUT 8: Separate outputs for the split DMX/RDM signal.
- POWER ON/OFF: Power switch for the device.
- AC230V50Hz: Power input for the device.
Controls and Connections:
The Opto Split Pro 5P has the following controls and connections:
- DMX / RDM IN: Input for the DMX/RDM signal.
- DMX / RDM THRU: Output for passing through the DMX/RDM signal.
- OUT 1 – OUT 8: Separate outputs for the split DMX/RDM signal.
- POWER ON/OFF: Power switch for the device.
- AC230V50Hz: Power input for the device.
Environmentally Friendly Disposal:
The packaging materials of the Opto Split Pro 5P are environmentally friendly and can be sent for normal recycling. Follow these instructions for proper disposal:
- Ensure that plastic bags, packaging, etc. are disposed of in the proper manner.
- Do not dispose of these materials with your normal household waste.
- Collect them for recycling according to local guidelines and markings on the packaging.
Waste Electrical and Electronic Equipment Directive (WEEE):
The Opto Split Pro 5P is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended. Follow these instructions for proper disposal:
- Do not dispose of your old device with your normal household waste.
- Dispose of the product through an approved waste disposal firm or your local waste management facility.
- Comply with the rules and regulations in your country when disposing of the device.
- If in doubt, consult your local waste management facility.
FAQ
(Frequently Asked Questions):
Q: What is the purpose of the Opto Split Pro 5P?
- A: The Opto Split Pro 5P is designed to split an RDM/DMX signal across separate outputs.
Q: Can I use the Opto Split Pro 5P for other purposes?
- A: No, using the device for any other purpose or under different operating conditions is considered improper use and may result in personal injury or property damage.
Q: Can children play with the Opto Split Pro 5P?
- A: Children should not play unattended with electrical devices. Ensure that children do not detach any small parts from the product as they could swallow them and choke.
Q: Can I use liquid cleaners to clean the Opto Split Pro 5P?
- A: No, it is recommended not to use liquid cleaners such as benzene, thinners, or flammable cleaning agents.
Q: How should I dispose of the packaging materials?
- A: Dispose of plastic bags, packaging, etc. in the proper recycling facilities according to local guidelines and markings on the packaging.
Q: How should I dispose of the Opto Split Pro 5P?
- A: Do not dispose of the device with your normal household waste. Dispose of it through an approved waste disposal firm or your local waste management facility, complying with the rules and regulations in your country.
Quick start guide
This quick start guide contains important information on the safe use of the product. Read and follow all safety advice and all instructions given. Keep the manual for future reference. If you pass the product on to others, please include this manual.
Safety instructions
Intended use
This device is designed to split an RDM/DMX signal across separate outputs. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damage resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow small parts and choke. Never let children play unattended with the electrical devices.
Operating location
Do not ever use this product:
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty places
- in locations where the device may get wet
General handling
- To prevent damage, do not exert force when handling the product.
- Do not immerse the product in water. Wipe only with a clean and dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents
Features
- 8-way DMX splitter
- The 19-inch-enabled DMX Splitter 8 RDM is equipped with a DMX input + DMX link out and eight further DMX outputs.
- Front: 1 × DMX input + 1 × DMX link out (passthru)
- Back: 8 × DMX output
- Connections electrically isolated
- RDM-enabled
- XLR IN / OUT: 5-pin
Controls and connections
- DMX / RDM IN: DMX input with 5-pin XLR chassis plugs for connecting a DMX controller.
- DMX / RDM THRU: 5-pin XLR chassis jacks for transmitting the DMX signal arriving at the DMX input (DMX / RDM IN).
- OUT 1 – OUT 8: LED display OUTPUT 1 – Output 8. The bottom LEDs light up red as soon as the device is switched on. The middle LEDs light up green if a DMX plug is connected to the corresponding output. The top LEDs light up green when an RDM signal is sent on the corresponding OUTPUT.
- POWER ON/OFF: Power Twist mains connection for the power supply of the device. A suitable power cord is included in the scope of delivery.
- AC230V50Hz: Should the fuse have blown, disconnect the unit from the power supply and replace the fuse with a new fuse of the same type. If the fuse blows repeatedly, please contact our service department.
- OUT 1 – OUT 8: DMX outputs 1 to 8 with 5-pin XLR chassis jacks.
- DMX / RDM IN: DMX input with 5-pin XLR chassis plugs for connecting a DMX controller.
- DMX / RDM THRU: 5-pin XLR chassis jack for transmitting the DMX signal arriving at the DMX input (DMX / RDM IN).
Technical specifications
- Supported protocol: DMX 512 and RDM
- DMX / RDM connections: 5-pin XLR
- Supply voltage : 230 V ~ 50 Hz
- Power consumption: 10 W
- Fuse: 1.0 A, 250 V, 5 × 20 mm, fast blow
- Dimensions (W × H × D) : 481 mm × 51 mm × 141 mm
- Weight : approx. 2.5 kg.
Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging. This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended. Do not dispose of your old device with your normal household waste. Dispose of the product through an approved waste disposal firm or through your local waste management facility. When disposing of the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste management facility
Thomann GmbH
- Hans-Thomann-Straße 1 96138 Burgebrach
- www.thomann.de
- [email protected]