MindMe Pro LS GPS Alarm User Guide

QUICK USER GUIDE – MindMe Pro LS
Starter Guide

MindMe Pro LS Overview

The MindMe Pro LS (MMPLS) combines a mobile phone, a GPS device, and GPRS satellite technologies to assist in tracking and monitoring vulnerable individuals in one easy to use solution

Turning ON MMPLS

Press and hold down the On/Off button. The MMPLS will vibrate and sound with tune

NOTE
The MMPLS may take up to 30 secs to boot up

Charging

NOTE
When charging, the LED flashes periodically, once fully charged the LED light remains on Before using your MMPLS please charge the watch for 3-4 hours. After charging to 100% the battery will last up to 24 – 48 hours.  When the battery charge falls below 20% the MPLS will SMS an alert to the primary number on your MPLS.

 It is a good idea to charge the MMPLS next to the wearer’s bed. That way when the wearer goes to bed the MMPLS can be placed on the charger and be fully charged, ready to go when the wearer gets up in the morning. This method also helps in creating a routine for the wearer as well as the carer.

Using the MMPLS

Emergency Procedure

Press and hold SOS button for 7 seconds. The LED light will flash for 3 secs and an audible ring will sound. This initiates the emergency procedure| Alert SMS is sent to the primary emergency contact (including the date, time, and google maps location of the MMPLS). Also sends an alert to
the mobile APP| The call cycle begins. First SOS contact # is called. If call is unanswered, the call moves to the next SOS contact # in the sequence of order within 12 secs

NOTE
Emergency contacts can be either mobiles or landlines. Only the primary number with a mobile phone will receive an SMS with the alerts and a Google Maps link. All emergency contacts will receive an alert via the mobile APP (note: Emergency contact needs to be logged into the mobile APP to receive alerts)

Fall Detection Procedure

The wearer falls, the MMPLS registers a fall and a chime will sound| Sends an SMS to the primary contact and includes a google maps link. Also sends an alert to the mobile APP| The call cycle begins. First SOS contact # is called. If call is unanswered, the call moves to the next SOS contact # in the sequence of order within 12 secs

NOTE
If a false alert is detected, the wearer can cancel the alert by quickly pressing the SOS button.

GEO Fencing Procedure

Wearer breaches the pre-set GEO fence virtual perimeter (either out or in of the perimeter)| Sends an SMS to the primary contact and includes a google maps link. Also sends an alert to the mobile APP confirming when the wearer has breached the virtual perimeter (either out or in of the perimeter)

NOTE
The GEO fence perimeter can be set at a minimum of 200m from the point location. i.e. 200m from the front gate of house If the  GEO fencing feature has been requested upon purchase, please contact MindMe on 1300 776 907 to assist with the initial setup.

Canceling a false alert

In circumstances where the SOS or fall alert has been accidentally activated, press the ‘On / Off’ button to cancel the alarm.

Checking the MMPLS is turned on

Tap the ‘SOS button’ for 1 sec. If the device is turned on, the blue LED light will flash.

Getting a GPS reading
Prior to using your device, you will need to get an initial fix for GPS, turn on the MMPLS and either take the MMPLS outdoors or place it near a window so the MMPLS can get a fix on the satellites. This could take up to 10 minutes.

NOTE
If this is not completed prior to use, you may not get an accurate GPS location.

MPLS Mobile APP

Downloading & Log into MMPLS Mobile APP
To monitor and program the MMPLS, you will need to download and log into the mobile APP (AIBEILE Plus). Your username and login details are detailed on the setup sheet provided.

Download the Aibeile Plus mobile APP from the Apple Store or Google Play| Open the Aibeile Plus app and follow the instructions below: Enter the ‘Login ID’ and ‘Password’ which are detailed on the ‘Setup and Overview sheet’ provided (PLEASE DO
NOT use your own email address to log in) Ensure that ‘Asia and Oceania’ is selected in the ‘Area’ section Press ‘Login’, and you will automatically be redirected to the homepage which is a map of the location of the device

NOTE
Mobile Plus is designed for emergency contacts to monitor and change device settings, the wearer is NOT required to download Aibeile Plus to operate the MPLS.

Mobile APP home screen overview
Below is an overview of some commonly used Aibeile Plus features and settings to assist in managing the MMPLS

NOTE
To change any settings or features, the MMPLS will need to be turned on

Changing Emergency Contact #’s

Select the ‘More’ icon from the homepage, then select ‘Settings’ from the options list.| From the ‘Settings’ menu, select the ‘SOS number’ option. A pop-up box
will appear, add or remove emergency contact #’s as desired, and select ‘Ok’. A grey pop-up box displaying ‘Set Ok’ will appear if the changes have been successful.

Changing fall sensitivity

From the ‘Settings’ menu, select the ‘fall notification’ option.| Select the ‘Sensitivity’ option. Then select the desired sensitivity from the drop-down box (1 = most, 6 = least sensitive, level 5 is recommended), press ‘Ok’ and ‘Save’. A grey pop-up box displaying ‘Set Ok’ will appear if the changes have been successful.

P: 1300 776 907
E: info@mindme.com.au
W: www.mindme.com.au

References

• Home | MindMe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>