ARDESTO FHK-2000GY Fan Heater Instruction Manual
- June 3, 2024
- ARDESTO
Table of Contents
FAN HEATER
Instruction manual
FHK-2000BG
FHK-2000GY Fan Heater
Thank you for choosing our product.
We want your product, which has been manufactured in modern facilities and
passed through a rigorous quality control process, to offer you the best
efficiency. Thus, read this entire manual carefully before using the product
and keep it as a reference guide.
The user manual helps you to use the product quickly and safely.
- Read the user manual before installing and using the product.
- Especially follow the information regarding safety. Keep the user manual in an easily accessible place as you may need it later.
- Also read the other documents provided with the product.
- Please follow the instructions in order to use your device efficiently in terms of energy consumption.
- Your device is for household use. It is not suitable for commercial use.
- Our company is not responsible for any injury or damage caused by not following the instructions in the user manual.
CAUTION! In order to avoid causing fire, electric shock and injury, read
the safety precautions carefully and follow the warnings.
WARNING! Do not use the product if its parts are broken or damaged!
Consult the nearest authorized service center or the company where this device
has been purchased.
NOTE: the values stated in the markings on the product or in other
printed documents provided with the products are the values obtained in the
laboratory environment in respect of the relevant standards. These values may
change according to the use and ambient conditions of the product.
This product has been produced in modern facilities respecting environment
without harming nature.
CAUTION: This product has been produced in accordance with safety
regulations. Non-compliance use may harm the person, device or environment.
SAFETY WARNINGS
- Read the user manual before using the product and keep it to consult in future. If you give your product to another person, give it with this manual.
- Do not use the product if the product or its accessories are absent, broken or damaged.
- Do not use your device for other than the purposes specified in this manual. (Do not use it to dry your clothes or to keep the animals or plants warm.)
- While not using the device, turn the function button to “off” and unplug the device. Do not pull the mains cable while unplugging. Use the product from the mains voltage.
- Do not leave your device unattended while it is functioning.
- If the power cord is damaged, it must be replaced by the manufacturer, customer service or similarly qualified personnel in order to avoid a hazard.
- Do not use your heater if it is damaged due to transportation, delivery or storage. In such a case, call your Authorized Service.
- The heater cannot be used with programmer, timer or any other setup running automatically.
- The fireguard of this heater is intended to prevent direct access to the heating elements and must be in its place while the heater is in use.
- Your device should not be used with another device connected to the same power cable or fuse.
- The power cord should not be placed on the hot body of the device or near to it. Do not make an addition for the supply cable. Otherwise, it may cause malfunction, electric shock or fire.
- If your device will not be used for a long time, will be moved, cleaned or adjusted, unplug the device and be sure that it is cool.
- Do not install the fan heater directly under the socket.
- Never expose the heating elements to water.
- The device must be unplugged during installation, maintenance or repair.
- While unplugging the supply cable do not pull the plug from the cable or touch it with wet hands and be careful not to crush it under heavy objects.
- Turn off your heater using the function button and unplug it.
- Keep your device in a dry and closed area.
- Perform the periodic maintenance and cleaning of your device according to the instructions in this manual.
- Do not use the heater while you are sleeping or do not leave it unattended in working condition.
- Avoid using extension cord, it may cause fire due to overheating. If you have to use an extension cable, the cable section should not be less than 2mm 2 (14AWG).
- Use the device on a flat and even surface. The device should only be used on its feet.
- Do not move the device while it is in use. Do not touch the device right after turning it off.
- During the first use of your device, a slight smoke and odor may occur, this is normal and will disappear in time.
- Fingers or other objects should not be inserted into the air inlet and outlet channels.
- This heater is not suitable for use in greenhouses and construction sites.
- There must be a minimum distance of 1 meter between the device and creatures, materials such as curtain, wood, cardboard, fabric etc. and other devices.
- Do not operate the device within 7.60m distance to flammable and explosive materials (gasoline, alcohol, etc.) and do not place it near motorized devices that are not expected to operate.
- This device can be used by children over 8 years of age and persons with physical or sensory or mental disabilities or with insufficient experience and knowledge, if they are under constant supervision or instructed in the safe use of the device and they understand the possible dangers.
- Children under 3 years of age should be kept as far away from appliances as possible unless they are monitored at all times.
- Children aged 3 to 8 years can only turn on/off the device, if the device is placed/installed in its normal working position provided for it. In addition, children must be provided with appropriate supervision or instructions for the safe use of the appliance and are aware of the dangers that may arise during use of the appliance. Children between the ages of 3 and 8 must not connect the appliance to the power supply (wall socket), adjust or clean the appliance, or carry out maintenance work by the user.
- Children should not play with the device. Cleaning and maintenance should not be performed by children without supervision.
- Packaging materials can be dangerous to children. Keep the packaging materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions. Do not throw it away with normal household waste.
WARNING: In order to avoid overheating, do not cover the heater. Never
close the ventilation channels.
WARNING: Do not cover your device or use it to dry any items.
WARNING: Do not use the device in a bathroom, shower or by the pool.
ATTENTION! Parts of this product may be very hot and cause burns.
Particular attention should be paid to where children and vulnerable persons
are.
WARNING! This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when occupied by persons
not capable of leaving a room on their own, unless constant supervision is
provided.
EQUIPMENT
- Fan heater – 1 pc
- User manual (warranty card is included) – 1 pc
DEVICE DESCRIPTION
This product has been produced in accordance with safety rules and directives
in force.
NOTE: The values stated in the markings on the product or in other
printed documents provided with the products are the values obtained in the
laboratory environment in respect of the relevant standards. These values may
change according to the use and ambient conditions of the product
- Function selection/Temperature adjustment button
- Air outlet channel
- Wall hook point
- Carrying handle
DEVICE INSTALLATION: Your device is completely ready to use and does not
require any assembly or electrical connection.
CAUTION! Before plugging in, make sure that the Power is in OFF position.
INSTALLING ON WALL
-
Your device can be used hanged on the wall. The device must be placed horizontally and according to distances required.
-
To hang the device on wall, you need to use 1 suitable screw and 1 dowel.
-
Drill the hole in the wall according to the height you desire and fix it with a screw and dowel
-
Hang the device on the wall and fix it horizontally using the fixing holes.
OPERATING THE DEVICE
-
Do not use the product if their parts are absent, broken, or damaged.
Contact to the Authorized Service. -
Never cover the air inlet and outlet ducts to avoid damaging the product.
-
Do not cover the product with anything. Do not touch the product with damp and wet hands.
-
Your device is equipped with a safety system against overheating.
HEATER LEVEL ADJUSTMENT
MAINTENANCE AND CLEANING
- Before starting to clean your device, turn off the device, unplug the power cord for safety and wait for the device to cool down.
- The outer surface of the device should be cleaned with a soft, cotton, slightly damp cloth or a soft brush.
- Never use abrasives or solvents to clean the heater.
- Do not clean the product with substances such as gasoline, thinner solvent, etc. that will corrode or damage the product.
- Do not clean your device using steam cleaners.
- Do not expose your device to water.
- Never immerse your product in any liquid for cleaning.
TROUBLESHOOTING
| Problem | Cause | Solution |
|---|---|---|
| The device does not work. | The device may be not plugged. |
The device is not switched on. There is no power in the socket. The cable may
be damaged.| Insert the plug into the socket. Start the device.
Try another socket. Call the authorized service.
The device is very hot.| The device may have been operated for too long.| Let
the device cool down.
The device stops automatically while it is working.| The safety system on the
device is activated.| Let the device cool down, if the problem continues, call
the authorized service.
STORAGE
When storing your device, you can wrap the power cord and place it in the
cradle on the back of the device. Before winding up the power cable, you must
definitely wait for the device to cool down. When not in use, keep your device
in a dry place.
DELIVERING AND TRANSPORT
The device must be transported in its original packaging or in a good and soft
package to prevent damage to the device. Follow the signs on the packaging.
CORRECT DISPOSAL OF THE APPLIANCE
**** This device should not be disposed of as it consists of recyclable
parts. Please contact the nearest collection center to recycle this device.
Keep the packaging materials out of the reach of children or dispose of them
by classifying them in accordance with the waste instructions. Do not dispose
of your device and its packaging with normal ousehold waste.
Warranty conditions:
The plant guarantees normal operation of the product within 12 months from the
date of the sale, provided that the consumer complies with the rules of
operation and care provided by this Manual.
Service life of the product is 5 years. In order to avoid any misunderstanding
we kindly ask you to carefully study the Owner’s Manual, the terms of
warranty, and check the correctness of filling the Warranty Card. The Warranty
Card is valid only if the following information is correctly and clearly
stated: model, serial number of the product, date of sale, clear seals of the
companyseller, signature of the buyer. The model and serial number of the
product must correspond to those specified in the Warranty Card. If these
terms are violated, and if the information specified in the Warranty Card is
changed, erased or rewritten, the Warranty Card is considered invalid. Setup
and installation (assembly, connection, etc.) of the appliance are described
in the attached documentation; they can be carried out both by the user, and
by specialists having the necessary qualification sent by USC or selling
companies (on a paid basis). In this case, the person (the institution)
installing the appliance shall be responsible for the correctness and quality
of installation (setup). Please pay attention to the importance of the correct
installation of the appliance, both for its reliable operation, and for
obtaining warranty and free service.Require the installation specialist to
enter all the necessary information about the installation in the Warranty
Card.
In case of failure of the appliance during the warranty period by the fault of
the manufacturer, the owner is entitled to free warranty repair upon
presentation of the correctly filled Warranty Card together with the appliance
in the factory configuration packed in the original packaging to the warranty
workshop or the place of its purchase. Satisfaction of the customer’s claim
due to the fault of the manufacturer shall be made in accordance with the
WARRANTY CARD
Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance,
which was designed and manufactured in accordance with the highest quality
standards, and we thank you for choosing this particular instrument.
We ask you to keep the coupon during the warranty period. When purchasing a
product, require a full warranty card.
-
Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
-
The service life of household appliances is 5 years.
-
The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
-
Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
-
The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
-
The product is removed from warranty service in the following cases:
• misuse and non-consumer use;
• mechanical damage;
• damage caused by the ingress of foreign objects, substances, liquids, insects;
• damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
• damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
• when operating equipment in the power supply network with a missing single ground loop;
• in case of violation of seals installed on the product;
• lack of serial number of the device, or inability to identify it. -
The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
-
The warranty period is 12 months from the date of sale.
- Tear-off maintenance tickets are provided by an authorized service center.
The completeness of the product is checked. I have read the terms of the
warranty service, no complaints.
Customer Signature ___
Warranty card
Product information——–
Product———
Model————–
Serial number————-
Seller Information——————
Trade organization name—————–
The address————————-
Date of sale—————————————
Seller stamp———————————
Coupon № 3
Seller stamp———-Date of the application
Cause of damage—–Date of completion
Coupon № 2
Seller stamp———-Date of the application
Cause of damage—–Date of completion
Coupon № 1
Seller stamp———-Date of the application
Cause of damage—–Date of completion