COMMSCOPE SM-UMPTB Tower Sector Frame Instruction Manual
- June 1, 2024
- CommScope
Table of Contents
COMMSCOPE SM-UMPTB Tower Sector Frame
OVERVIEW
GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
- FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
-
ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED BEFORE INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE
REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB. -
UP TO 2.0° TAPER AVAILABLE ON MODELS THAT SUPPORT ADJUSTMENT
-
MANUFACTURING/SPECIAL REQUIREMENTS
-
TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING THE TURN-OF-NUT METHOD WITH ATTENTION TO LEAVING EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT. ALL FASTENERS SHOULD BE TIGHTENED PER AISC 6.5.2
-
TEST
-
PACKAGING
-
PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
-
PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
-
EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
ATTACHED TO SECTOR FRAME AND RING MOUNT VIEW
COMPONENT PART NUMBERS ARE PROVIDED FOR ASSEMBLY PURPOSES; INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
Specifications
- Dimensions: Height 9.0 in, Length 43.4 in, Width 4.2 in
- Material: Steel
- Weight: 1361.21 lbs
- Volume: 14076.62 cubic inches
- Surface Area: 74284.19 square inches
Product Usage Instructions
Installation Guidelines
Before installing the product, identify any hazards or obstructions in the
climbing facility. Additional products may be needed to maintain safety.
Follow the guidelines for tightening bolts and U-bolts as per AISC 6.5.2.
Testing After installation, conduct a thorough test to ensure the product’s stability and safety.
Packaging
The product packaging should meet CommScope requirements as outlined in document IS-PL-3005. Extra hardware may be supplied separately.
FAQ
Q: Are the sector frame and ring mount included with the product?
A: No, the sector frame (SFG23RHDX) and ring mount (MC-RM1550-3D) are sold
separately.
Q: What is the recommended method for tightening bolts?
A: Tighten all bolts securing flat plates using the turn-of-nut method.
U-bolts should also be tightened using the turn-of-nut method, ensuring equal
distance and force on each leg of the U-bolt.