IKEA VALLHORN Smart Wireless Motion Sensor Instructions

IKEA VALLHORN Smart Wireless Motion Sensor

Product Information

Specifications:

• Product Name : VALLHORN Motion Sensor
• Manufacturer: IKEA of Sweden AB
• Compatibility: Works with smart lights and plugs from IKEA
• Control: Can be used with DIRIGERA hub to control smart products via the IKEA Home smart app

Product Usage Instructions

1. Get to know your product: Familiarize yourself with the VALLHORN motion sensor and its features.
2. Connectivity Range: Ensure the sensor is within the connectivity range of the smart lights or plugs.
3. Battery Safety: Do not mix different types of batteries. Dispose of used batteries properly.
4. Cleaning Instructions: Clean the product with a soft, dry cloth. Avoid using abrasive cleaners or chemicals.

Product Usage Steps:

1. Initial Setup without DIRIGERA Hub:
   • Ensure the smart product is installed and turned on.
   • Keep the motion sensor close to the smart product (less than 5 cm).
   • Press and hold the pairing button for at least 10 seconds. A red LED will indicate successful pairing.
   • The smart product will flash a white LED once connected.

Additional Information:
The crossed-out wheeled bin symbol on the product indicates proper disposal procedures. Follow local regulations for recycling and waste disposal.

FAQ (Frequently Asked Questions):

1. Q: How do I connect the VALLHORN motion sensor to the IKEA Home smart app?
   A: You can connect the sensor to the app by following the provided instructions for initial setup without the DIRIGERA Hub. Ensure the app is downloaded from the appropriate store for your device.

2. Q: Can the VALLHORN motion sensor work with other smart home systems?
   A: The VALLHORN motion sensor is designed to work specifically with smart lights and plugs from IKEA. Compatibility with other systems may vary.

3. Q: How do I replace the batteries in the VALLHORN motion sensor?
   A: To replace batteries, follow the guidelines provided in the user manual. Use only the recommended battery type to avoid any risks of explosion.

VALLHORN motion sensor works with smart lights and plugs from IKEA. It can be used with DIRIGERA hub to control smart products via the IKEA Home smart app.

• IKEA Home smart app
  For Apple devices, download the app using the App Store. For Android devices, download the app using Google Play store.

• Note: If you have a TRÅDFRI gateway please use IKEA Home smart 1 app. For the best experience, please upgrade to DIRIGERA hub.

• Getting started with DIRIGERA hub
  Download the IKEA Home smart app and follow the instructions on screen. With DIRIGERA, you can connect as many products as you want to one motion sensor.

Getting started without DIRIGERA hub

1. 1. Make sure the smart product you want to connect is installed and powered on.
2. Hold the motion sensor close to the smart product (less than 5 cm away).
3. Press and hold the Pairing button for at least 10 seconds. A red LED will steadily shine under the lens of the motion sensor. The smart product will pulse with a white LED once connected.

Good to know
Without DIRIGERA, you can connect a maximum of 10 smart products to one motion sensor. Remember to add one product at a time. If your products are close together, disconnect the ones you have already connected while adding the next product.

Get to know your product

•  Pairing button
• Choose how many minutes the connected lights and plugs will be on.
• Choose between light and dark mode. In light mode, the detected motion will turn on lights in any surrounding. In the dark mode, the detected motion will turn on the lights only in the dark surrounding.

Changing the batteries
A red LED light will light up under the lens of the motion sensor to show that new batteries are needed. Open the battery lid and replace with two new AAA/HR03 batteries. We recommend using LADDA rechargeable batteries. Please note they are sold separately.
Factory reset
To reset and remove all connected products, quick-press the Pairing button 4 times (within 5 seconds). Follow steps 1-3 to reconnect your smart products.
Care instructions
To clean the product, wipe it with a soft dry cloth. Do not use abrasive cleaning agents, chemical solvents or other equipment that may damage the products.

IMPORTANT!

• Operating temperature: -5ºC to 40 ºC.
• Do not leave the sensor in direct sunlight or close to any heat source to prevent overheating.
• Different building materials and placement of the units can affect the wireless connectivity range.

WARNING!
Risk of explosion if either battery is replaced by an incorrect type. Do not mix batteries of different capacities, types or date stamps. Dispose of used batteries according to instructions.

Technical data

• Model: VALLHORN motion sensor
• Type: E2134
• Input: 2.4V, 2 x LADDA batteries HR03/AAA 1.2V
• Range: 10 m in open air.
• Sensor view angle : 60º – 120º
• Sensor range: About 10 m
• Operating frequency: 2405-2480 MHz
• Output power: 3 dBm
• IP-class: IP44
• Manufacturer: IKEA of Sweden AB
• Address: Box 702, SE-343 81 Älmhult, SWEDEN

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

© Inter IKEA Systems B.V. 2023
AA-2398360-2

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>