Cloud CS-SUB8 8 Inch Surface Mount Subwoofer Installation Guide
- June 13, 2024
- CLOUD
Table of Contents
Cloud CS-SUB8 8 Inch Surface Mount Subwoofer
CAUTION –
Installation
Speaker must be installed by qualified speaker technician.
CAUTION – Servicing
Do not perform servicing unless you are qualified to do so. The unit contains
no user-serviceable parts.
Refer servicing to qualified personnel.
CAUTION – Tap Switch
Before use check and set tap switch under grille to proper setting for your
system.
EXPLODED VIEW
TAP SETTINGS
Tap
| CS-SUB8
---|---
| 100 V| 70 V| 25 V
1|
4 ohm
2| X| 100W|
13W
3
|
100W
| 50W| 7W
4| 50W| 25W|
3W
5
| 25W| 13W| 1.5W
6| 13W| 6W|
0.8W
MOUNTING OPTIONS
-
Floor or Shelf
-
Horizontal Surface mount
-
Vertical Surface mount
-
Fly mount
INSTALLATION
Step 1
Remove speaker from box.
Step 2
Locate euroblock in accessory bag and conne ct signal wire.
For daisy chaining, use “LINK” output to run to next speaker
Step 3
Set tap switch to proper setting. Tap switch is preset to highest 100V
position.
Step 4 – SURFACE MOUNT
Remove rubber feet. Attach speaker mounting bracket to cabinet choosing
vertical or horizontal mounting holes with provided screws, DO NOT OVER-
TIGHTEN.
Step 4.1 – Horizontal
Use these hole to attach speaker mounting brackets to cabinet for Horizontal
mount.
Step 4.1 – Vertical
Use these hole to attach speaker mounting brackets to cabinet for vertical
mount.
Step 5
Securely attach wall bracket with wall bracket lock tab facing up.
Step 6
Insert euroblock into rear of subwoofer.
Step 7
Hang subwoofer by inserting tabs of speaker brackets into wall bracket slots.
Step 8
Insert bracket locking screw at top of bracket.
Step 9
Done.
FLOOR OR SHELF MOUNT
Follow steps 1-3. Set subwoofer on floor or shelf.
FLY MOUNT
Insert 4 optional forged eyebolts in M6 inserts on side of speaker cabinet.
Use appropriate cables to hang speaker. Follow steps 1-3.
CUSTOMERS SUPPORT
www.cloud.co.uk
www.cloudusa.pro
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>