VIMAR 30210.USBx Universale USB C Canapa Instruction Manual
- June 13, 2024
- VIMAR
Table of Contents
VIMAR 30210.USBx Universale USB C Canapa
Product Information
The product is a USB Type C port with the following model numbers:
- LINEA 30210.USB
- EIKON 20210.USB
- PLANA 14210.USB
The USB Type C port supports a voltage of 5V and a current of 3A. It is
compatible with a 250V~ power supply at 50/60 Hz frequency. The device has a
current rating of 185mA. The efficiency of the USB
Type C port is 82% and the power factor is 73%. It has an IP20 rating,
indicating protection against solid objects larger than 12mm and no protection
against water.
Product Usage Instructions
To use the USB Type C port, follow these steps:
- Ensure that the power supply is turned off.
- Locate the USB Type C port on your device (LINEA 30210.USBx, EIKON 20210. USB or PLANA 14210. USB).
- Connect the USB Type C cable to the USB Type C port.
- Connect the other end of the USB cable to your desired device, such as a smartphone or tablet.
- Turn on the power supply.
Note: Before using the USB Type C port, refer to the user manual for any specific instructions or safety precautions provided by the manufacturer. For more detailed information and WEEE (Waste Electrical and Electronic Equipment) information, you can download the PDF from the product data sheet on www.vimar.com. You can also use the QR code provided to access the data sheet directly.
Read the instructions before installation and/or use
FRONT VIEW
Graphic representation of the Linea series. The position of terminals, wiring, and functions is also identical for Eikon, Arké, and Plana.
FEATURES
- Power supply: 250 V~ 50/60 Hz
- Power consumption: 185 mA
- Output voltage: 5.0 V d.c. (± 5%) ES1 and/or order SELV
- Max output load 3,0 A
- Output power: 15.0 W
- Average efficiency in active mode: 82%
- Efficiency with low load (10%): 73%
- Power with no load: 0.03 W
- Protection degree: IP20
- Device in class
- Installation for CAT
INSTALLATION RULES
IMPORTANT
- An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream from the power supply.
- An SPD (surge protection device) must be installed upstream of the system to reduce the overvoltage category from III to II.
- Install the device at a height of no more than 2 m.
- REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead
- DEVICE DETAILS AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT FROM THE PRODUCT DATA SHEET ON www.vimar.com (the QR code opens the data sheet of art. 30210. USBB, which shares the same instructions sheet as art. 30210.USBx-20210.USB-19210.USB-14210.USB).
- Viale Vicenza, 14
- 36063 Marostica VI – Italy
- 49401811A0 02 2303www.vimar.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>