beper P101PIA002 Electric Hot Plate Instructions
- June 13, 2024
- beper
Table of Contents
beper P101PIA002 Electric Hot Plate
Product Information The Electric Hot Plate is a household appliance
designed for heating and cooking food. It has a power of 500W and operates on
a power supply of 220-240V ~ 50/60Hz. The hot plate is suitable for use with
pots that have a solid bottom thickness and a diameter between 8 cm and 12 cm,
with a maximum capacity of 2.5 litres. It is recommended to use a pot with a
flat bottom and the same diameter as the hot plate for optimal heat transfer.
The hot plate should not be used near explosives, highly flammable materials,
gases, or burning flames. It should also be kept out of reach of children and
individuals without experience or technical ability. Close supervision is
necessary when the hot plate is used by or near children.
To ensure safety, the cord, plug, and other parts of the appliance should not
be immersed in water or other fluids. When using the hot plate, avoid touching
the surface of the plate as it may be hot. The hot plate should not be used in
open spaces or outdoors.
For cleaning, the appliance should be turned off and disconnected from the
power socket. The surface can be wiped clean with a lightly damp cloth or a
nonabrasive detergent. However, the product should not be immersed in water.
Beper reserves the right to modify or improve the product without notice for
improvement reasons.
Product Usage Instructions
- Ensure that the hot plate is placed on a stable and heat-resistant surface before use.
- Plug the appliance into a suitable power outlet.
- Place a pot with a solid bottom and a diameter between 8 cm and 12 cm on the hot plate. Ensure that the pot is suitable for the hot plate’s capacity.
- Turn on the hot plate using the power switch or temperature control, if available.
- Wait for the hot plate to reach the desired temperature before placing food in the pot.
- Never leave oil or fat unattended while heating.
- When finished cooking, turn off the hot plate and unplug it from the power outlet.
- Allow the hot plate to cool down before cleaning. Use a lightly damp cloth or a nonabrasive detergent to wipe the surface clean. Do not immerse the product in water.
Precautions
- Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.
- Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
- The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
- The appliance can be damaged if the voltage is not correct.
- If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
- Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
- Do not use the appliance if the cable or the plug shows any damages.
- Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
Electric Hot Plate Use Instructions
This appliance is for household use only. To protect against electric shock,
do not immerse cord, plug or any parts of the appliance into water or other
fluids. Do not use the appliance near explosives, highly flammable materials,
gases or burning flames.
Do not allow children, disabled people or every people without experience or
technical ability to use the appliance if they are not properly watched over.
Close supervision is necessary when any appliance used by or near children.
Use advice Never leave oil and fat to be heated without supervision.
Do not touch the surface of the plate when the appliance is in use or getting
hot.
The plate has been manufactured only for heating or cooking food. It is
recommended to use the plate when the fry pan is already placed on it. Do not
use the appliance in open space/outdoors. The product is for home use only.
Pot type
To optimize the use of the hot plate, the pots should have a solid bottom thickness and possibly a diameter between 8 cm and 12 cm up to a maximum of 2.5 litres of capacity.
- Pot with a flat bottom and the same diameter of the hot plate, is the best solution as absorbs the heat of the cooking plate very well.
- If the pan is too small, there will be considerable heat loss and the performance of the product will be compromised.
- If the pan is too large, the heat transfer from the plate to the bottom of the pan will be too low and the performance of the product will be compromised.
Use
When using the hot plate for the first time, connect the plug to the socket and turn the hot plate to the highest temperature for 3-5 minutes to eliminate the smell and smoke that the protective substances present on the metal parts can develop. Turn on the appliance by turning the switch. When the light indicator turns on, the appliance is in use.
Turn the switch to get desired 5 levels of :
- Slow cooking, delicate piece of food, thickening sauces, etc.
- For simmering large quantities
- Shallow trying of meat
- To bring all dishes to rapid heat
- To bring all dishes to boil The light indicator turn off when the hot plate reaches the selected temperature. Do not use the appliance for more than one hour. During use, do not leave the electric cable dangling and/or in contact with the hot surfaces of the product. When the appliance is not in use, check that the thermostat position is at minimum and disconnect from the mains.
Leave the appliance cooling down before storing.
Cleaning
Turn off the appliance and disconnect from the socket. Then clean with a lightly damp cloth or with a nonabrasive detergent. Do not immerse the product in water.
Technical data
- Power: 500W
- Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee applies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the appliance’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beper reserves the right
to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward your enquiries to your distributor.
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com