kogan KAULTSONJWCA 600ml Ultrasonic Jewellery Cleaner User Guide

USER GUIDE
ULTRASONIC JEWELLERY CLEANER
600ML
KAULTSONJWCA 

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide before first use. Retain this user guide for future reference.

• Keep the power cord away from hot surfaces.

• Close supervision is needed when this cleaner is used by, or near children.

• Always turn off the socket and unplug the power cord immediately after use.

• Do not use this cleaner outdoors.

• Do not use it while bathing.

• Do not use this cleaner while sleepy or drowsy.

• Do not operate the cleaner without water as this will cause it to become damaged.

• Do not place or drop the cleaner into water or any other liquids.

• Do not touch the cleaner if it has fallen into water or any other liquid.

• Do not store the cleaner where it can fall or be pulled into liquids.

• Never leave the cleaner unattended when plugged in.

• If the power cord is damaged, stop use immediately and contact help.Kogan.com for assistance.

• If the cleaner has been dropped or damaged, stop use immediately and contact help.Kogan.com for assistance.

• Do not disassemble the cleaner yourself.

• Do not overfill and allow the cleaner to overflow.

• Do not clean the machine with solvents, detergents, or abrasives.

• This cleaner is suitable for the following items:
  o Necklaces
  o Rings
  o Earrings (except inlay studs)
  o Bracelets
  o Watchbands
  o Razor blades
  o Combs
  o Toothbrushes
  o Dentures
  o Coins
  o Badges
  o Valves
  o Cutlery

• This cleaner is not suitable for coated glass (for example, prescription glasses).

• Do not use any third-party accessories with this cleaner.

The following items are NOT suitabl e for ultrasonic cleaning:

S oft jewelry:
For example, pearls, emerald, ivory, coral, agate, and sea turtle shells.| Placing these items may result in scratches to them if cleaned with this machine.
---|---
Welded, plated, and glued items| Ultrasonic cleaning may enlarge the gaps inside the welded joints, plated coating, or
glue and may cause separation.
Watches:
Except for diver’s watches with depth rating over 50m.| The strong penetration capability of the ultrasonic waves may result in water entering
watches if they are not waterproof.
Inlay studs and unfastened decorations| These items may shed and become damaged during cleaning.
Others:
Wood, coated glass (for example, prescription glasses), ceramic, camera, or
filters with pre-existing cracks.| Ultrasonic cleaning may damage the protective coating on these items or enlarge
pre-existing cracks.

OVERVIEW

Cover

Open view

Note:
The jewelry shown is for reference only and is not included.

OPERATION

1. Open the cover and put the item you wish to clean into the tank. Fill the tank with enough water to submerge the item.
   Notes:
   • Do not fill the water above the fill line in the tank.
   • Running the water will cause damage to the cleaner.

2. Close the cover. Connect the power cord to a socket and turn the socket on. The power indicator will then illuminate blue.

3. Press the ON button to begin cleaning the item. The cleaning indicator light will then illuminate red.
   Note:
   The cleaner may emit noise during the cleaning process. This is normal.

4. After 3 minutes of cleaning, the cleaner will automatically stop, and the cleaning indicator light will turn off.
   If you wish to stop the cleaning process early, press the OFF button. If you wish to go through another cleaning cycle with the same item, wait for 5 minutes to allow the machine to cool, then press the ON button again.

5. Once finished, turn off the socket and unplug the power cord. Open the cover and remove the item from the water. Pour the water out into a sink.

Other cleaning methods
For a stronger clean, you may use detergents or other cleaning agents with the machine.
Follow the directions on the chosen detergent/cleaning agent to clean the item.
For larger items that may not be able to be submerged, you may also clean smaller sections.
Ensure the level of water/cleaning agent used is low enough to prevent overflowing.

CLEANING & CARE

Ensure the cleaner is empty, turned off, and unplugged before cleaning.
Clean the tank with water, especially after using detergents or cleaning agents.
Wipe the exterior with a dry towel.

N ote:
To avoid electrocution, never wash the exterior with water or any other liquid.

Storage
Keep the cleaner in a cool and dry place.

SPECIFICATIONS

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>