YiFeng M2A 2 In 1 Magnetic Wireless Charging Stand User Manual
- June 13, 2024
- YiFeng
Table of Contents
2-in-1 Magnetic
Wireless Charging Stand
Model: M2A
Preface:
Thank you for choosing the 2 in 1 Magnetic Wireless Charging Stand.
Please read this user manual carefully before use and keep this manual in a
safe place for future reference.
Please use the high quality QC3.0 18W adapter
Specifications
- 2 in 1 Magnetic Wireless Charging Stand
- input: 9V 2A
- Phone output: 15W Max
- Earphone output: 5W Max
- USB-C interface
| Charge phone only | Charge Earphones only |
|---|---|
Can also be charged by Magnetic Earphones
Compatible Devices
- (Magnetic)iPhone 14 Pro Max/14 Pro/14 Plus/ 14/13 Pro Max/13 Pro/13/13 mini/12 Pro Max/ 12 Pro/12/12mini
AirPods Pro 2nd Generation/AirPods 3/AirPods Pro MagSafe/
AirPods Pro/AirPods 2nd Generation
Please Note:
- Please remove your phone case before charging if the thickness >5 mm, or if the phone case makes your phone size longer than 164 mm.
- Only use certified QC 3.0/PD charging wall adapter to charge the device, do not plug into computer USB port or any other non-certified USB port.
- Place your Qi-enabled device accurately in the wireless charging area when charging.
- A QC 3.0/PD adapter is required when charging mobile phones can be quickly charged
- Make sure to disconnect the device from power when cleaning.
- It is normal and safe to hear a humming noise when very close to the charger. lt means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed.
- If your device can not be fully charged, this may due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging. Please use a magnetic case to charge your phone
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not i nstalled and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
UK:
This device was tested for uncontrolled environment operations.
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that the
product type M2A is in compliance with following Directives: Radio Equipment
Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The full text of the UK declaration of
conformity is available at the following internet address:
https://www.YFZN.cn/
EU:
This device was tested for uncontrolled environment operations.
To complywith RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product
Declaration of Conformity
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd.declares that the
product type M2A is in compliance with Directives 2014/53/ EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.YFZN.cn/
| Radiated H-Field | 7.3 dBuA/m (@10m) |
|---|---|
| TX/RX Frequency Range | 110-148kHz(Only for EU&UK) |
Shenzhen Yifeng Intelligent Technology Co., Ltd.
10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng
Street, Gushu, Baoan District, Shenzhen, China.
Important Safety Instructions
- Do not store device in high-temperature environment, including heat caused by intense sunlight or other forms of heat.
- Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F(100C) may cause explosion.
- Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
- Do not expose the wireless charger to rain or snow.
- Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>