SuperLightingLED D-13 Mini 360 Degree Braided LED Neon Flex Circular Tube Instructions

SuperLightingLED D-13 Mini 360 Degree Braided LED Neon Flex Circular Tube

Side & Details parameter

• weight ( g/m) 123
• beam angle 360°
• section size(MM) 013
• working, temperature -20~50″C
• IP rating IP67

Structure

1. Woven layer : Woven surface

2. 0pen   layer: Spread the light 360 degree

3. PCB

4. Professional design with continuous and uniform illumination, no led dot or dark spot. same color consiste

5.  Silicon housing UV & Flame & Heat resistant, stable performance in heavy weather.

6. Resistance to corrosion, acid and alkali. Fully IP65 waterproof can be used underwater long time.

7. Extremely flexible, easy to bend to any

Installation accessories

Cutting Method

1. Find cutting mark(Prevent the woven mesh from loosening and tie it with ropes in advance at the cutting position)
2. Cut the length as your request
3. Finished

Straight/end cap installation

1. wire & end cap
2. get through the wire as the arrow direction
3. red-positive signal line in the middle outside is the linenegative

4. weld the wire through cap to the PCB
5. gluing cap, leave for 2-3 hours packing after 12 hours

Installation method of end cap)

1. gluing end cap
2. moving after 2-3 hours packing after 12 hours

Clip way

1. screws and clip
2. use screws to fix the clip

3. embed strip into clip gently ,emitting view upward
4. completely embedded strip into clip, finished

Packaging method

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>