BEGA 24039 Celling and Wall Luminaire Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 24039 Celling and Wall Luminaire
Product Information
The Decken- und Wandleuchte (Ceiling and wall luminaire) is a high-quality
lighting fixture suitable for both indoor and outdoor applications. It is made
of aluminum casting with opal glass and a silicone seal. The luminaire has a
distance of 190 mm and comes
with a plug-in device and protective ground connection. It has a protection
class of I and an IP rating of 65, making it dustproof and protected against
water jets. The luminaire is also impact-resistant with an IK06 rating.
The electronic components installed in the luminaire are protected against overvoltage according to DIN EN 61547. However, for additional protection against transients, it is recommended to use separate overvoltage protection components, which can be foundon the manufacturer’s website at www.bega.com.
Usage Instructions
- Installation:
- Lead the mains supply cable through the cable entry of the luminaire base.
- Fix the luminaire base onto the mounting surface using the enclosed or suitable fixing material.
- Make the earth conductor connection and the electrical connection.
- Ensure that the installation and commissioning are carried out by a qualified electrician in accordance with national safety regulations.
- Note that any modifications to the luminaire should be made by a responsible person and may void the manufacturer’sliability.
Technical Specifications:
Lamp Module connected wattage| Luminaire connected wattage| Rated temperature|
Ambient temperature
---|---|---|---
7.8 W| 9 W| LED-0916/830 3000 K| CRI > 80 1450 lm 1097 lm 121.9 lm/W
7.8 W| 9 W| LED-0916/840 4000 K| CRI > 80 1470 lm 1112 lm 123.6 lm/W
Please note that the color temperature, color rendering index (CRI), module luminous flux, luminaire luminous flux, and luminaire luminous efficiency may vary depending on the specific model (K3 or K4). Refer to the product designation for accurate information.
Dimension
Ceiling and wall luminaire
Application
- Unshielded ceiling and wall luminaire with high protection class.
- For a variety of interior and exterior lighting applications.
Product description
- Luminaire made of aluminium alloy
- and stainless steel
- BEGA Unidure® coating technology
- Opal glass
- Silicone gasket
- 2 mounting holes ø 5.5 mm
- Distance apart 190 mm
- 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
- Connecting terminal 2.5@
- with plug connection
- Earth conductor connection
- LED power supply unit
- 220-240 V x 0/50-60 Hz
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
- Safety class I
- Protection class IP 65
- Dust-tight and protection against water jets Impact strength IK06
- Protection against mechanical
- impacts < 1 joule
- – Safety mark
- – Conformity mark
- Weight: 2.4 kg
- This product contains light sources of energy efficiency classes D
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage inaccordance with DIN EN 61547.
- To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Lamp
-
Module connected wattage 7.8 W
-
Luminaire connected wattage 9 W
-
Rated temperature ta = 25 °C
-
Ambient temperature ta max = 55 °C
24 039 K3 -
Module designation LED-0916/830
-
Colour temperature 3000 K
-
Colour rendering index CRI > 80
-
Module luminous flux 1450 lm
-
Luminaire luminous flux 1097 lm
-
Luminaire luminous efficiency 121,9 lm / W
24 039 K4 -
Module designation LED-0916/840
-
Colour temperature 4000 K
-
Colour rendering index CRI > 80
-
Module luminous flux 1470 lm
-
Luminaire luminous flux 1112 lm
-
Luminaire luminous efficiency 123,6 lm / W
Installation
- Lead the mains supply cable through the cable entry of the luminaire base.
- Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
- Make the earth conductor connection and the electrical connection.
- In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
- Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
- Push plug into coupler as far as it will go.
- Make sure that gasket is positioned correctly.
- Place the opal glass with LED unit onto the luminaire base in such a way that both yellow arrow markers align to each other and screw the glass clockwise into the base up to the stop.
Cleaning · Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
- Do not use high pressure cleaners.
Replacing the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
- The module can be replaced by qualified persons using standard tools.
- Disconnect the system and open the luminaire.
- Please follow the installation instructions for the LED module.
- Inspect and, if necessary, replace the luminaire gaskets.
- Defective glass must be replaced.
- Close the luminaire.
Spares
LED power supply unit DEV-0451/350
LED module 3000 K LED-0916/830
LED module 4000 K LED-0916/840
Spare glass 75 004 029
Desiccant pouch 79 000 208
Gasket 83 001 634
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com