VALBERG TT TU 127 E S742C Top Fridge User Manual

VALBERG TT TU 127 E S742C Top Fridge

Thanks!

Thank you for choosing this VALBERG product. Chosen, tested and recommended by ELECTRO DEPOT, the  products of the VALBERG brand are easy to use, reliable and of an impeccable standard. Thanks to this appliance, you can be sure that each use will bring you satisfaction.

Welcome to ELECTRO DEPOT.

Visit our website: www.electrodepot.fr

WARRANTY CONDITION

This product has a 2-year warranty as of the date of purchase, covering any fault resulting from a manufacturing or material defect. This warranty does not cover defects or damage resulting from incorrect installation, improper use or abnormal wear of the appliance. upon presentation of the sales receipt.

Preview of the appliance

Description of the appliance

1. Thermostat and Light
2. Glass Shelves
3. Crisper Cover
4. Crisper
5. Leveling Feet
6. Balconies

The illustration is only for hinting, the detail please check your appliance.

Using the appliance

Reverse Door

Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.

• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It’ s better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to avoid scratch.

4. Unscrew bottom hinge. Then remove the adjustable feet from both side.

Note: remove this screw if it presents.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
   

6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.

7. Place the door back on. Ensure the door is aligned horizontally and vertically, so that the seals are closed on all sides before finally tightening the top hinge.

8. Put the top cover and fix it with 2 screws on the back.

9. Detach the Fridge and the Freezer door gaskets and then attach them after rotating.

Installation

Space Requirement

Keep enough space of door open.

Levelling the unit

To do this adjust the two levelling feet at front of the unit.

If the unit is not level, the doors and magnetic seal alignments will not be covered properly

Positioning

Install this appliance at a location where the ambient temperature corresponds to the climate class Indicated on the rating plate of the appliance: for refrigerating appliances with climate class:

• extended temperate: this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C; (SN)
• temperate: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C;(N)
• subtropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C;(ST)
• tropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C;(T)

Location

• The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.

• To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 50mm.

• Ideally, however, the appliance should not be positioned below overhanging wall units.
  Accurate leveling is ensured by one or more adjustable feet at the base of the cabinet.

• This refrigerating appliance is not intended to be used as a built-in appliance;

WARNING
It must be possible to disconnect the appliance from the mains power supply; the plug must t-therefore be easily accessible after installation.

Electrical connection

• Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed.
• The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
• The manufacturer declines all responsibility if the above safety precautions are not observed. This appliance complies with the E E C. Directives.

Daily use

Temperature setting recommendation

Environment Temperature

|

Freezer
compartment

|

Fridge compartment

---|---|---

Summer

|

/

|

Normal

|

/

|

Winter

|

/

|

Information above give users recommendation of temperature setting.

Impact on Food Storage

• Under Recommended setting, the best storage time of fridge is no more than 3 days.
• The best storage time may reduce under other settings.

Daily use

• Position different food in different compartments according to be below table

• Foods with natural preservatives, such
  as jams, juices, drinks, condiments.

• Do not store perishable foods.

Crisper drawer (salad drawer|

• Fruits, herbs and vegetables should be
  placed separately in the crisper bin.

• Do not store bananas, onions, potatoes, garlic in the refrigerator

Fridge shelf – middle|

• Dairy products, eggs

Fridge shelf – top|

• Foods that do not need cooking, such as ready-to-eat foods, deli meats, leftovers.

First use

Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly.

IMPORTANT
Do not use detergents or abrasive powders, as these will damage the finish.

Temperature Setting

• Plug on your appliance. The internal temperature is controlled by a thermostat. There are 8 settings. 1 is warmest setting and 7 is coldest setting and 0 is off.
• The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often.
• This refrigerating appliance is not suitable for freezing foodstuffs.

Accessories
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

Positioning the door balconies
To permit storage of food packages of various sizes, the door balconies can be placed at different heights. To make these adjustments proceed as follows: gradually pull the balcony in the direction of the arrows until it comes free, then reposition as required.

Useful information

Helpful hints and tips

Hints for fresh food refrigeration
To obtain the best performance:

• Do not store warm food or evaporating liquids in the refrigerator
• Do cover or wrap the food, particularly if it has a strong flavour

Hints for refrigeration
Useful hints:

• Make (all types): wrap in polythene bags and place on the glass shelves above the vegetable drawer.
• For safety, store in this way only one or two days at the most.
• Cooked foods, cold dishes, etc…: these should be covered and may be placed on any shelf.
• Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s) provided.
• butter and cheese: these should be placed in special airtight containers or wrapped in aluminum foil or polythene bags to exclude as much air as possible.
• Milk bottles: these should have a cap and should be stored in the balconies on the door.
• Bananas, potatoes, onions and garlic, if not packed, must not be kept in the fridge.

Cleaning and care

For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly

CAUTION
The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapors can lead to the damage of plastic parts.
The appliance must be dry before it is placed back into service.

IMPORTANT
Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice form orange peel, butyric acid, cleanser that contain acetic acid.

• Do not allow such substances to come into contact the appliance parts.
• Do not use any abrasive cleaners
• Remove the food from the freezer. Store them in a cool place, well covered.
• Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker of fuse.
• Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe with fresh water and rub dry.
• After everything is dry place appliance back into service.

Replace the lamp

• This product contains a light source exempted of energy efficiency class.
• Light source in this product can be replaced by the end user.
• Please unplug the appliance before any light source change operation.
• The light source shall be removed at the end of the product’s useful life, with sorting and recycling done separately.

Follow below process to replace the lamp:

1. Set the temperature regulation knob at number «0» to switch off the appliance.
2. Unplug the appliance to make sure the appliance is disconnected from main power supply.
3. Remove the screw of the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
6. Fit new lamp according to the opposite direction, then replace the lamp cover and screw.
   Plug in the appliance and regulate the knob to right position.
   

Troubleshooting

CAUTION
Before troubleshooting, disconnect the power supply. Only a qualified electrician of competent person must do the troubleshooting that is not in this manual.

IMPORTANT
There are some sounds during normal use (compressor, refrigerant circulation).

Set the knob at other number to switch on the appliance.
Mains plug is not plugged in or is loose| Insert mains plug.
Fuse has blown or is defective| Check fuse, replace if necessary.
Socket is defective| Mains malfunctions are to be corrected by an electrician.
Temperature is not properly adjusted.| Please look in the initial Temperature Setting section.
Door was open for an extended period.| Open the door only as long as necessary.
The food is too warm.| A large quantity of warm food was placed in the appliance within the last 24 hours.| Turn the temperature regulation to a colder setting temporarily
The appliance is near a heat source.| Please look in the installation location section.
Appliance cools too much| Temperature is set too cold.| Turn the temperature regulation knob to a warmer setting temporarily
Appliance is not level.| Re-adjust the feet.
The appliance is touching the wall or other objects.| Move the appliance slightly
Unusual noises| A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.| If necessary, carefully bend the component out of the way.
Water on the floor| Water drain hole is blocked.| See the Cleaning and Care section.
Side panels are hot.| It’s normal. Heat exchange parts are in the sides.| Take gloves to touch sides.

If the malfunction shows again, contact the Service Center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>