SMART WATCHES GT22 Smartwatch User Guide

SMART WATCHES GT22 Smartwatch User Guide

Precautions:

• When measuring, please wear the device normally, avodjoints, and not be too loose,5o as not to affect the measurement results due to the shaking of the collector
• During the measurement process, please keep your body still put your arms on the table or your knees and relax your arms and fingers.At the same time,do not let go of the electrodes with your fingers and make moderate contact with the electrodes to avoid excessive pressng or nsufficient contact.
• If the skinis too dry please wet your finger with asmallamount of water before measuring; please keep the surface of the device dry, and if there s water stain,wipe it dry before measuring
• Asingle measurement lasts 30 seconds

Appearance function introduction

Touch instruction| Long-press| Long pestle salon the dad interface sutththeda| Click| Choong Confirm
---|---|---|---|---
Stretch lied down| Slowdown the don the diintetcg to bromes the shortcut menu| Slldeup| 51u10emer refunction key on the dal S retted
Slde ight| Eadk5carghtta dal on the dill enface to enter Siege| Side leit| Side ltthedalon the dal narrate tana the furcation interfaced

Environmental protection

• Please do Nat dispose of this device and its accessories as ordinary household waste. Model; Cent name

• Please comply with local laws and regulations regarding the handling of this device and its Worming
  accessories, and support receding operations, Magnet Charging Cube Half a year limited Warranty Delivery Client contact no. Purchase date: N 5ales contact no. Others(including watch strap/gfts) at Under Warranty Protection level Clint address Vendor(stamp)

• The watch meets he p67 protection levee requirements and is suitable for daily waterproofing

Name and content of hazardous substances

Power on/off

Power on

• Long press the power button to stat the watch in shutdown state.
• When starting with sutra-low power connect the charger to charge the watch for 1 minute before starting.

Power off

• Long press the power button to shut off the watch n power-on state.’
• After ultra-low battery vibration reminder, the watch wilautomaically Shu down.

Reset

• In the power-on state enter the function menu and sect Settings Reset Health APP
• After restoring the factory settings, the watch will restart automatically and al user data of the watch will be cleared after the restart.

This form is prepared in accordance with the provisions of SJ/T11364

O It means that the content of this hazardous substance n al homogeneous materials of this part is under the limit requirements stipulated in GB/T26572.

X It means that the content of the hazardous substance in at least one homogeneous material aft the component exceeds the limit requirements stipulated n GB/T26572,and thee is currently no mature alternative in the industry, which meets the environmental protection requirements of the EU RoHS directive

Disclaimer

• The contents of this manual are provided according to the status quo. Unless required by applicable law the company does not provide any express or implied guarantees for al contents in this manual, including but not limited to the guarantee of marketability or for a specific purpose.
• To the extent permitted by applcable aws the company wllnot use the eevant contents of this manua and the products described in this manua under any circumstances.Compensation shall be made for any special,incidental,indirect or secondary damages arising from the praduct,and no profts,data,compensation shal be made for loss of goodwillor anticipated savings.
• To the extent permitted by he relevant awes in any case the company’s maximum labially for the losses you suffer from using the products described n this manual is imbed to the price you pay for the purchase of this product(Except for damages accordance with applicable awes in cases involving persona jury).

Charging instructions

The accessory that comes with the watch is a magnetic charging cable. Connect the USB head of the charging cable to the power charger produced by a regular manufacturer orthel USB port of the computer Align the charging feed point of the magnetic suction line with the charging feed point of the watch in the correct direction for adsorption untether Charging instruction interface appears on the watch screen. When the watch is ultra low battery it needs to continue charging for about 1 minute to display the charging status on the screen,

• Please use the special charging cable included in the package to charge Please make sure the charging contacts of the watch are clean and complete before charging
• Please use a regular manufacturers charger with a rated output voltage of 5V/0.2Aar above or a computer USB port
• The heart rate, ECG body temperature blood pressure, blood oxygen and other heath sign data involved n this product can only be used as an auxiliary reference for medical diagnosis

Warmings

Protection level

• The watch meets he p67 protection levee requirements and is suitable for daily waterproofing Name and content of hazardous substances D such as hand washing and rain. disclaimer Sales address.
• tis prohibited to unseen water activities such as diving, swimming opals and coastal swimming.
• It is prohibited to use in hot water showers, hot springs saunas(steam rooms) diving water skiing, other wading cattiites and deep water activities facing high-speed water flow.
• It can prevent dust condition’s such as giving room office laboratory light industrial studio, storage foam, etc. It s prohibited o use in specie dust erwironment.

Maintenance

• Please keep the equipment and its accessories dry. Don’t dry t with externa heating equipment such as microwave oven or hair dryer
• Please use Norma temperature clean water cleaning equipment regularly to avoid distend bacteria.
• Do not place the device and its accessories in areas where the temperature is too high or too low. Otherwise the device may malfunction, catch fire, or explode.
• The watch will be fully charged about two hours The screen shows 100% that means the battery s fully charged.
• If the watch Prompt “charging error “or” please replace’ that means the charging contact is incorrect please replace the watch. Power on

APP download

Android users:

1. Searching for Undo Health in the mobile application market dawned and install the Undo Health APP
2. Scan the QR code below or the QR code of the watch to downlead and install the Fund Health APP

lOS users:

1. Log into the App Store an the mobile phone and search far Fund Health to downloaded and install the Fund Health APP
2. Scan the QR code below are the QR code father watch to download and install the Fund Health APP

• Warranty message Do not subject the device and its accessories to strong shocks or vibrations, so as not to damage the device and it’s accessories and cause the device to malfunction
• Please avoid using the device in the environment of hot sun, high temperature humidity and open flame accessories
• Donatus strong chemicals, detergents or strong detergents to clean the device or its accessories,
• Donor allowchildren or animals tocheworswallow the device,

After-sales service

Please contact the after-sales service of the sales office are point of purchase. Non-man-made quality problems are guaranteed for half a year. The product warranty start date is based on the date of invoice or receipt.Artificalqualty problems include but aren’t imbed to thefolowng situations;

1. Failure caused by unauthorized disassembly and reassembly of watches
2. Damage due to negligence or misuse. For example the host enters the water, the externalforce bursts, accidentally falls the casing is scratched or damaged.
3. Please paved a warranty card with the date af purchase and stamped with the sealift the place of purchase or an invoice or receipt stamped with the sea of he place of purchase Those who cannot provide the above proof will not be nettled to free warranty.

Connect phone

1. Turn on the Bluetooth switch of the phone and watch.
2. Connect Bluetooth data function: Open the Fund Health app and open the app related permissions according to the prompts in the pop-up box. Click devices Add device available select and click GT22 in the device its and then the watch and mobile phone owl automatically start binding and pairing and synchronize data.
3. Connect to the watch Bluetooth call or connect to the mobile function; Turn on the watch’s Bluetooth caller connect to the phone function, then open the phone setting’s s Bluetooth select and click call-watch in the searched list the connection s successful.

• The watch supports BT3.0and BT4.0,so Bluetooth needs to be connected twice.
• When connecting you need to turn on the sharing system notification n the Buetooth details settings of the mobile phone
• In order to extend the battery life, the Bluetooth 3.0 malfunction will automatically sleep, and will automatically wakeup when an incoming call or aaliis made.

Please check whether the following v s eddy before retuning or replacing the goods or sending Hazar After-sales service them to be repaired.

| Watch and accessories complete| Giftbox unopened| Invoice| Gifts
---|---|---|---|---
Returned purchase| √| y| √| √
Returned purchase| √| √| y|
Service| √| | y|

ECG detection

Measurement methods:

1. Wear the device with tight wrists, make sue that the metalelectrodes on the back of the device are fully attached to the skin do not have foreign objects blocking them do not deviate farm the suspension, and maintain a calm state.
2. Select the ECG application in the application ist to enter the ECG test interface. Cick the setting icon on the interface to choose the wearing method (left-handed or ight-handed) Keep your finger in contact with the elected pad aft the down button (as shown n the figure),and the measurement WellStar automatically.
3. After the measurement is completed ,click Finish, and you can view the detailed ECG collection record report an the ECG detection application on the mobile phone.

Warranty message

warranty Card

Model;| Cvent name
Client contact no| Purchase date:
5ales contact no.
Clent address| Vendor(stamp)
Sales address.

Attention:

This warranty card is only applicable to the three-guarantee service of the host wth the serial number listed above

• Please keep this warranty certificate properly, and Pease show this certificate and invoke or receipt when  enjoying the three guarantees service
• This certificate needs to be stamped by the sales unit before it becomes effective.
• Man-made damage s nat coveed by the warraty

The information is for reference only and is subject to change without notice!

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 2. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

.Increase the separation between the equipment and receiver. .Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.

References

• fingers.at - This website is for sale! - fingers Resources and Information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>