nathan james 96201 Remi Tufted Headboard Instruction Manual
- October 30, 2023
- NATHAN JAMES
Table of Contents
96201 Remi Tufted Headboard
Instruction Manual
96201 Remi Tufted Headboard
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to
Netflix in no time.
Estimated time for assembly
30:00
What you need
- Some of your favourite bubbly or your preferred relaxant
- Use the packaging carton as a working surface to prevent product damage during assembly
- Phillips head screwdriver
- Drill with 1/4” drill bit
Toll-free at 1-866-619-1004
Help@nathanjames.com
Nathanjames.com/help
What’s included
| Description | Qty |
|---|---|
| A Left Metal Rail | 1 |
| B Right Metal Rail | 1 |
| C Headboard | 2 |
| D Metal Connector | 1 |
| 1 M4*35 mm Screw | 14 |
| 2 Anchors | 14 |
| 3 Allen Key | 1 |
| 4 M4*14 mm Bolt | 8 |
| 5 M6*12 mm Bolt | 4 |
| 6 EVA Pad | 12 |
| 7 Mounting Installation Template | 1 |
| 8 Bracket | 8 |
The goods
IMPORTANT
- Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
- Do not over tighten screws and bolts to avoid stripping.
- Please use hand tools to assemble this product. Do not use power tools.
Step 1
Let’s get this thing fired up!
Assemble the Left and Right Metal Rails (A)(B) using the Metal Connector (D).
Secure with M6*12 mm Bolts (5). Remember to remove the 2 bolts in the Metal
Connector (D) before assembling the rail.
Please note:
Part (A), (D), and (B) need to be on the same level before you secure them
with the M6*12mm bolts (5).
Step 2 Using the Mounting Installation Template
Unroll it
Unroll paper Mounting Installation Template (7) and remove the adhesive
backing.
Place it
Locate where you would like to mount the headboard and apply Mounting
Installation Template (7) to the wall in that location. Make sure the template
and holes are level.
Match it
Using the template as a guide, match the circular plates on the metal rails
with the circular cut-outs on the top of the paper template in order to
accurately mark where all the holes will need to be.
Mark it
Using the holes in the template and the metal rail as a guide, mark the
location of each hole on the wall. These will become your guides as to where
to drill the holes for the all anchors.
Remove it
Slowly remove the paper, ensuring that all holes have been marked.
Drill it
Drill each hole with a 1/4” drill bit.
Step 3
Install Brackets (8) on the wall. First insert the Anchors (2), then mount the
Brackets (E) with the M4*35 mm Screws (1) into the Anchors (2). See the
graphic below for hole locations and bracket orientation.
Step 4
Attach the Brackets (8) to the back of the Headboards (C) with M4*14 mm Bolts
(4). Repeat this process for both Headboard panels.
Step 5
Apply the EVA Pads (6) to the back of the Headboard panels (C).
Step 6
Mount the panel on the wall by matching the brackets on the back of the panel
with the brackets that you just installed on the wall.
Now it’s time for the Rail! First, insert the Anchors (2), then mount the Rail (A)(B) (D) with M4*35 mm Screws (1) into the wall anchors.
Step 7
You made it to the last step! We knew you could do it. Now all that’s left to
do is to flip the straps over the rail and secure with the velcro. Time to sit
back, relax, and enjoy your new headboard!
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at
help@nathanjames.com we will issue you a free
replacement with zero hassle.
Our way
| Give us a call
---|---
| Replacement
| You
Their way
| Re-package item
---|---
| Schedule pick up
| Track package
| Replacement
| You
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later
We want your Remi Diamond Tufted Hanging Headboard to last as long as
possible, so we recommend that you tighten the screws 2 weeks after assembly
and for added safety check the tightness of all screws every 2 months.
For proper care and treatment of fabric & metal please check our website at
NathanJames.com/products
Safe use of this product starts with you.
Use this headboard responsibly with the primary concern for your safety.
Follow assembly instructions carefully and inspect product upon receipt and
each use.
Nathan James and its parent companies cannot be held legally responsible for
any injuries or death resulted from failure to follow instructions or improper
use of this product.
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were
originally intended to be sold. Any modifications will present the risk of
creating significant safety issues which NJ will not be responsible for.
Proper use
| DO NOT | use for commercial purposes |
|---|---|
| DO NOT | put on uneven surface |
| DO NOT | put hot serving liquid directly on headboard |
| DO NOT | use headboard if broken or damaged |
| DO NOT | make temporary repairs |
| DO NOT | use outdoors |
We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
Help@nathanjames.com
NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but
occasionally mistakes happen—as humans we are imperfect beings. In the event
that a part is damaged or missing, we will be more than happy to provide you
with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please
use your phone to scan the QR code to register your product or visit
https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or
even better leave us a review online. Spreading the word gives us the
opportunity to make more people happy and keep our prices low for your next
purchase.
https://qrcodes.pro/JxgdKe Scan me!
Inspiration
Digital Instructions
Free Lifetime Warranty
https://qrcodes.pro/5cycm6
22-0208
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>