nathan james 13601 Atlas 1 Light Plug In Wall Lamp Instruction Manual

: May 15, 2024
: NATHAN JAMES

nathan james 13601 Atlas 1 Light Plug In Wall Lamp Instruction Manual

Product Using Instruction

Scan me!
Free Lifetime
Warranty

Ok, let’s get rolling

This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly

25:00

What you need

Your favorite snack or energy bar (Save the bubbly for once your fixture is safely installed!)
Use the packaging carton as a working surface to prevent product damage during assembly
Phillips head screwdriver
Pencil
Drill
Non-drywall = 1/4” Drill Bit
Drywall = 5/16” Drill Bit

What’s included

Description	Qty
1	Mounting Arm
2	Shade
3	Socket with Cord
A	Screws M3.5*35mm
B	Non Dry Wall Anchors
C	Dry Wall Anchors
D	Screws M3.5*50mm

Safety first, fun later

Safe use of this product starts with you.
Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.

Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which Nathan James will not be responsible for.

Proper use

DO NOT use for commercial purposes
DO NOT leave spilled liquid on fixture
DO NOT use light fixture if damaged
DO NOT make temporary repairs
DO NOT use outdoors
WARNING
nspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004
WARNING : RISK OF ELECTRIC SHOCK
Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off at the switch is NOT SUFFICIENT to prevent electrical shock.
PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.

The goods

**A

B**

C

D

IMPORTANT

Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
Do not over tighten screws and bolts to avoid stripping.
Please use hand tools to assemble this product. Do not use power tools.

Pre-Installation

Read all instructions prior to beginning assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Keep the receipt and these instructions for proof of purchase.
Suggested Bulb: ST19 Vintage LED 60 Watt Equivalent | E26 Medium Base | Dimmable
Fixture Max Wattage: 60W

Step 1

Time to unleash your skills! Place Mounting Arm (1) in the desired location on your wall. Use the holes as a guide to mark where you will drill the holes for the wall anchors.

Double check to make sure that everything is level!

Step 2
Using a drill + proper drill bit & the reference marks from Step 2, drill 3 holes into the wall.
IMPORTANT NOTE:
Non-drywall = 1/4” Drill Bit
Drywall = 5/16” Drill Bit

Step 3
Go ahead and tap the proper wall anchors into place in the new holes you just drilled. You may be able to push them into place with your thumb
IMPORTANT NOTE:
Non-drywall Anchors = B
Drywall Anchors = C

Step 4
Mount the Mounting Arm (1) to the wall by screwing the proper screws, dependent on the wall type, into the wall anchors.
IMPORTANT NOTE:
A for Non-drywall Anchors D for Drywall Anchors

Step 5
Remove shade collar from the socket assembly by unscrewing it.

Step 6
Wrap cord around Mounting Arm to set socket height.You can adjust this to your liking.

Step 7
Secure shade in place by screwing the shade collar back into place, sandwiching the shade between the shade collar and socket assembly.

Step 8
Last but not least, we need to add the bulb! Insert the bulb of your choice and let there be light!
We recommend using 1 Type ST19 light bulb. 120V 60Hz AC only.
Bulb (not included)

Troubleshooting

Problem

| Possible Causes|

Solutions

---|---|---
The bulb will not light.| The bulb is burned out| Replace the light bulb.
The fuse blows or circuit breaker blows when the light is turned on.| The power is off.| Ensure the power supply is on.
The circuit breaker is of| Ensure the circuit breaker is in the ON position.
There is an exposed wire.| Discontinue use of the light. Contact a qualified electrician or reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004.

Questions? Don’t worry, we’ve got the answers

What other light bulbs can fit in this light?

The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit.

Can I use an LED light bulb?

Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.

Is this UL/ETL certified?

Yes, all our products are either UL or ETL.

Do I need an electrician to set up the hardwire?

We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.

Can I retrofit this hard-wired to a plug-in or vice-versa?

Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware.

Is this light compatible outside North America?

Our lighting is only warranted in Canada and the United States.

What do I do if the product is not working?

Try a different light bulb and confirm proper installation.

Can these lights work on a dimmer?

Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.

Can I use the fixture outdoors?

No, this product was not designed to be used outdoors.

No heartburn, when we handle the return

Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.

Our way

|

Their way

---|---

Give us a call

|

Re-package item

Replacement

|

Schedule pick up

You

|

Track package

Replacement

You

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

We are only in business if you’re happy

For starters, thanks for being you.

We do our best to ensure your product arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.

Warranty

This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit : https://goo.gl/i9dk3q

Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.

Founder, Nathan James

Scan me!
Free Lifetime
Warranty