nathan james 13150 Rori 23 Inch 3 Light Black Vanity Light Indoor Bathroom Instructions

October 30, 2023
NATHAN JAMES

nathan-james-LOGO

nathan james 13150 Rori 23 Inch 3 Light Black Vanity Light Indoor

Bathroom

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-1

Product Information

The Rori Vanity Light is a lighting fixture designed for indoor use only. It comes with a fixture body, a mounting plate, finial nuts, mounting screws, and wire nuts. The product is SKU 13150 and has a free lifetime warranty. The estimated time for assembly is 35 minutes. The product has been tested to meet specific safety measures and any modifications made to the product will present the risk of creating significant safety issues which Nathan James will not be responsible for.

Product Usage Instructions

  • Safety First: Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect the product upon receipt and each use. Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
  • Proper Use: Do not use the Rori Vanity Light for commercial purposes or outdoors. Leave no spilled liquid on the fixture and do not use the light fixture if damaged. Make no temporary repairs and inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation and instead reach out to Nathan James Customer Happiness team at help@nathanjames.com or 1-866-619-1004.

Installation

  1. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off at the switch is NOT SUFFICIENT to prevent electrical shock. PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
  2. Unscrew the Finial Nuts (C) to remove the Mounting Plate (B) from the back of the Fixture (A).
  3. Remove the decorative cages from the fixture by removing the Finial Nuts (C) on top of each socket.
  4. Install your preferred light bulbs into each socket before re-installing the decorative cages back onto the fixture. We recommend using Type T14 bulbs. Max 60W per bulb. 120V 60Hz AC only.
  5. Install Mounting Bracket to your pre-installed Electrical Box.
    Note: Be sure that you are only making the connections to a 120V 60Hz AC circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. Do not over tighten screws and bolts to avoid stripping. Please use hand tools to assemble this product and do not use power tools.

Scan me!
Inspiration
Digital Instructions Free Lifetime Warranty

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-2

Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.

What you need

  • Your favorite snack or energy bar (Save the bubbly for once your fixture is safely installed!)
  • Use the packaging carton as
  •  working surface to prevent product damage during assembly

ABOUT COMPANY

Safety first, fun later

  • Safe use of this product starts with you.

    • Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
    • Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
  • Proper use

    • DO NOT use for commercial purposes
    • DO NOT leave spilled liquid on fixture
    • DO NOT use light fixture if damaged
    • DO NOT make temporary repairs
    • DO NOT use outdoors
  • Do not modify the structure of this product in any way.
    Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which Nathan James will not be responsible for.

  • WARNING
    Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004

  • WARNING: RISK OF ELECTRIC SHOCK
    Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off at the switch is NOT SUFFICIENT to prevent electrical shock. PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.

PRODUCT DESCRIPTION

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-3

IMPORTANT

  1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
  2.  Do not over tighten screws and bolts to avoid stripping.
  3. Please use hand tools to assemble this product. Do not use power tools.

Pre-Installation

  • Read all instructions prior to beginning assembly.
  • To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
  • Keep the receipt and these instructions for proof of purchase.
  • Use 1 Type T14 Bulb (not included).
  • Max 60W per bulb.
  •  120V 60Hz Only.

INSTALLATION

  • Step 1
    • Let’s get this thing fired up! Or should we say, lit!
    • Unscrew the Finial Nuts (C) to remove the Mounting Plate (B) from the back of the Fixture (A).

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-4

  • Step 2
    Remove the decorative cages from the fixture by removing the Finial Nuts (C) on top of each socket.

  • Step 3
    Install your preferred light bulbs into each socket before re-installing the decorative cages back onto the fixture.

  • Step 4
    Install Mounting Bracket to your pre-installed Electrical Box.

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-7

  *  **Note:** Be sure that you are only making the connections to a 120V 60Hz AC circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.
  * Tip from a friend to a friend: Be sure that the Mounting Plate screws are level vertically to ensure properly aligned installation of your fixture.
  • Step 5
    Wrap the ground wire from the Fixture (A) around the grounding screw on the Mounting Plate (B) & then secured by tightening the screw.

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-8
You’re over halfway done! You got this!

  • Step 6
    • Use Wire Nuts (E) to connect the matching colored wires (White to White, Black to Black & Ground to Ground).
    • Once complete, tuck the excess wire into the Electrical Box.

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-9

  • Step 7
    • Secure the Fixture (A) to the Mounting Plate (B) on your pre-installed Electrical Box using the Finial Nuts (C).
    • Helpful tip: Follow the direction of the arrow on the label at the back of the fixture when installing the Fixture Body (A).
    • To properly fasten the finial nuts, thread in or out to adjust for proper threading length.

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-10

  • Step 8
    Last but not least, once all of the bulbs are installed, adjust the cages downward so that they are vertical.

nathan-james-13150-Rori-23-Inch-3-Light-Black-Vanity-Light-Indoor-Bathroom-
FIG-11

Troubleshooting

Problem Possible Causes Solutions
The bulb will not light. The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is on.
The circuit breaker is off. Ensure the circuit breaker is in the ON position.
The fuse blows or circuit breaker blows when the light is turned on. There is
an exposed wire. Discontinue use of the light.

Contact a qualified electrician or reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004.

Questions? Don’t worry, we’ve got the answers

  • What other light bulbs can fit in this light?
    The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit.

  • Can I use an LED light bulb?
    Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.

  • Is this UL/ETL certified?
    Yes, all our products are either UL or ETL.

  • Do I need an electrician to set up the hardwire?
    We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.

  • Can I retrofit this hard-wired to a plug-in or vice-versa?
    Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware.

  • Is this light compatible outside North America?
    Our lighting is only warranted in Canada and the United States.

  • What do I do if the product is not working?
    Try a different light bulb and confirm proper installation.

  • Can these lights work on a dimmer?
    Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.

  • Can I use the fixture outdoors?
    No, this product was designed to be used indoors only in dry or damp locations.

No heartburn, when we handle the return

Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.

Our way

Their way

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

We are only in business if you’re happy
For starters, thanks for being you.

  • Toll-free at 1-866-619-1004
  • Help@nathanjames.com
  • NathanJames.com/help
    We do our best to ensure your lighting arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.

Warranty

This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q

Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

NATHAN JAMES User Manuals

Related Manuals