nathan james 95101 Remi Tufted Headboard Instruction Manual
- October 30, 2023
- NATHAN JAMES
Table of Contents
nathan james 95101 Remi Tufted Headboard
Product Information
The Remi Tufted Headboard (SKU 95101) is a metal-framed headboard with two upholstered panels. The headboard comes with all necessary hardware for assembly, including left and right metal rails, a headboard, a metal connector, screws, anchors, an Allen key, EVA pads, a mounting installation template, and brackets. The estimated time for assembly is 30 minutes.
Product Usage Instructions
-
Assemble the Metal Rails
Using the metal connector (D), assemble the left and right metal rails (A)(B) and secure them with M6*12mm bolts (5). Ensure that part A, D, and B are on the same level before securing them. Do not over tighten the screws. -
Use the Mounting Installation Template
Unroll and remove the adhesive backing from the mounting installation template (7). Place it on the wall where you want to mount the headboard and ensure that it is level. Match the circular plates on the metal rails with the circular cut-outs on the top of the paper template to mark where all the holes will need to be drilled. Remove the paper slowly to ensure that all holes have been marked. Drill each hole with a 1/4 drill bit. -
Install Brackets on the Wall
Insert anchors (2) into the holes and mount brackets (8) with M4*35 mm screws (1) into the anchors. Repeat this process for both brackets. -
Attach Brackets to the Headboards
Attach brackets (8) to the back of the headboards (C) with M4*14 mm bolts (4). Repeat this process for both headboard panels. -
Apply EVA Pads
Apply EVA pads (6) to the back of each headboard panel (C). -
Mount the Headboard Panels on the Wall
Match the brackets on the back of the headboard panels (C) with the brackets that were installed on the wall. Mount the rail (A)(B)(D) on the wall by inserting anchors (2) and securing it with M4*35 mm screws (1). -
Attach the Straps
Flip the straps over the rail, snap the buttons together, and tuck the end of the straps behind the headboard.
Please note that you should not tighten bolts/screws completely until all bolts/screws are lined up and inserted into holes. Also, use hand tools to assemble this product and do not use power tools to avoid stripping.
Scan me!
Inspiration
Digital Instructions Free Lifetime Warranty
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to
Netflix in no time.
Estimated time for assembly
30:00
What you need
- Some of your favorite bubbly or your preferred relaxant
- Use the packaging carton as a working surface to prevent product damage during assembly
- Phillips head screwdriver
- Drill with 1/4” drill bit
Toll-free at 1-866-619-1004
Help@nathanjames.com
Website: Nathanjames.com/help
Scan me!
Inspiration
Digital Instructions Free Lifetime Warranty
The goods 
IMPORTANT
- Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
- Do not over tighten screws and bolts to avoid stripping.
- Please use hand tools to assemble this product. Do not use power tools.
Step 1
Let’s get this thing fired up! Assemble the Left and Right Metal Rails (A)(B)
using the Metal Connector (D). Secure with M6*12 mm Bolts (5). Remember to
remove the 2 bolts in the Metal Connector (D) before assembling the rail.
Please note: Part (A), (D), and (B) need to be on the same level before you secure them with the M6*12mm bolts (5).
Step 2 Using the Mounting Installation Template
Unroll it
Unroll paper Mounting Installation
Template (7) and remove the adhesive backing.
Place it
Locate where you would like to mount the headboard and apply
Mounting Installation Template (7) to the wall in that location. Make sure the
template and holes are level.
Match it
Using the template as a guide, match the circular plates on the metal rails
with the circular cut-outs on the top of the paper template in order to
accurately mark where all the holes will need to be
Mark it
Using the holes in the template and the metal rail as a guide, mark the
location of each hole on the wall. These will become your guides as to where
to drill the holes for the wall anchors.
Remove it
Slowly remove the paper, ensuring that all holes have been marked.
Drill it
Drill each hole with a 1/4” drill bit.
Step 3
Install Brackets (8) on the wall. First insert the Anchors (2), then mount the
Brackets (E) with the M4*35 mm Screws (1) into the Anchors (2). See the
graphic below for hole locations and bracket orientation.
Step 4
Attach the Brackets (8) to the back of the Headboards (C) with M4*14 mm Bolts
(4). Repeat this process for both Headboard panels.
Step 5
Apply the EVA Pads (6) to the back of the Headboard panels (C).
Step 6
Mount the panel on the wall by matching the brackets on the back of the panel
with the brackets that you just installed on the wall.
Now it’s time for the Rail! First, insert the Anchors (2), then mount the Rail (A)(B)(D) with M4*35 mm Screws (1) into the wall anchors.
Step 7
You made it to the last step! We knew you could do it. Now all that’s left to
do is to flip the straps over the rail, snap the buttons together, and tuck
the end of the straps behind the headboard. Sweet dreams!
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at
help@nathanjames.com we will issue you a free
replacement with zero hassle.
Our way
Give us a call
Replacement
You
Their way
Re-package item
Schedule pick up
Track package
Replacement
You
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later
We want your Remi Button Tufted Hanging Headboard to last as long as possible,
so we recommend that you tighten the screws 2 weeks after assembly and for
added safety check the tightness of all screws every 2 months.
For proper care and treatment of fabric & metal please check our website at
NathanJames.com/products
Safe use of this product starts with you.
Use this headboard responsibly with the primary concern for your safety.
Follow assembly instructions carefully and inspect product upon receipt and
each use.
Nathan James and its parent companies cannot be held legally responsible for
any injuries
or death resulted from failure to follow instructions or improper use of this
product.
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were
originally intended to be sold. Any modifications will present the risk of
creating significant safety issues which NJ will not be responsible for.
Proper use
- DO NOT use for commercial purposes
- DO NOT put on uneven surface
- DO NOT put hot serving liquid directly on headboard
- DO NOT use headboard if broken or damaged
- DO NOT make temporary repairs
- DO NOT use outdoors
We are only in business if you’re happy For starters, thanks for being you.
Toll-free at 1-866-619-1004
Email: Help@nathanjames.com
Website: NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or
even better leave us a review online. Spreading the word gives us the
opportunity to make more people happy and keep our
prices low for your next purchase.
Brooklyn Burdon
Founder, Nathan James
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>