nathan james 95203 Remi Tufted Headboard Instruction Manual

95203 Remi Tufted Headboard
Instruction Manual

95203 Remi Tufted Headboard

Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
30:00
What you need

• Some of your favourite bubbly or your preferred relaxant
• Use the packaging carton as a working surface to prevent product damage during assembly
• Phillips head screwdriver
• Drill with 1/4” drill bit

Toll-free at 1-866-619-1004
[email protected]
Nathanjames.com/help

What’s included

The goods

IMPORTANT

1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. Do not use power tools.

Step 1
Let’s get this thing fired up!
Assemble the Left and Right Metal Rails (A)(B) using the Metal Connector (D). Secure with M6*12 mm Bolts (5). Remember to remove the 2 bolts in the Metal Connector (D) before assembling the rail.

Please note:
Part (A), (D), and (B) need to be on the same level before you secure them with the M6*12mm bolts (5).

Step 2 Using the Mounting Installation Template

Unroll it
Unroll paper Mounting Installation Template (7) and remove the adhesive backing.

Place it
Locate where you would like to mount the headboard and apply Mounting Installation Template (7) to the wall in that location. Make sure the template and holes are level.

Match it
Using the template as a guide, match the circular plates on the metal rails with the circular cut-outs on the top of the paper template in order to accurately mark where all the holes will need to be.

Mark it
Using the holes in the template and the metal rail as a guide, mark the location of each hole on the wall. These will become your guides as to where to drill the holes for the all anchors.

Remove it
Slowly remove the paper, ensuring that all holes have been marked.

Drill it
Drill each hole with a 1/4” drill bit.

Step 3
Install Brackets (8) on the wall. First insert the Anchors (2), then mount the Brackets (E) with the M4*35 mm Screws (1) into the Anchors (2). See the graphic below for hole locations and bracket orientation.

Step 4
Attach the Brackets (8) to the back of the Headboards (C) with M4*14 mm Bolts (4). Repeat this process for both Headboard panels.

Step 5
Apply the EVA Pads (6) to the back of the Headboard panels (C).

Step 6
Time to install the Headboards (C) on the wall! Align the Brackets (8) on the back of the Headboards (C) with the Brackets (8) you attached to the wall in Step 3, and slide Headboards (C) into place.

Now it’s time for the Rail (A)(B)(D)! First, insert the Anchors (2), then mount the Rail (A) (B)(D) with M4*35 mm Screws (1) into the wall anchors.
Step 7
You made it to the last step! We knew you could do it. Now all that’s left to do is to flip the straps over the rail, snap the buttons together, and tuck the end of the straps behind the headboards. Time to sit back, relax, and enjoy your new headboard!

No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at [email protected] we will issue you a free replacement with zero hassle.

Our way

| Give us a call
---|---
| Replacement
| You

Their way

| Re-package item
---|---
| Schedule pick up
| Track package
| Replacement
| You

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

Safety first, fun later

We want your Remi Diamond Tufted Hanging Headboard to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
For proper care and treatment of fabric & metal please check our website at NathanJames.com/products
Safe use of this product starts with you.
Use this headboard responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.
Proper use

We are only in business if you’re happy
For starters, thanks for being you.
 Toll-free at 1-866-619-1004
[email protected]
NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.

Warranty

This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.

https://qrcodes.pro/JxgdKe Scan me!
Inspiration
Digital Instructions
Free Lifetime Warrantyhttps://qrcodes.pro/3xjZ0p
22-0208

Documents / Resources

| nathan james 95203 Remi Tufted Headboard [pdf] Instruction Manual
95203 Remi Tufted Headboard, 95203, Remi Tufted Headboard, Tufted Headboard, Headboard
---|---

References

• Support : Nathan James
• Collections
• Product Warranty | Nathan James

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>