CyberPower P2WUC3 Professional Surge Protection Instruction Manual

June 13, 2024
CyberPower

CyberPower-LOGO

CyberPower P2WUC3 Professional Surge Protection

CyberPower-P2WUC3-Professional-Surge-Protection-
PRODUCT

Product Information

Your Ultimate Ally in Power

  • Model Number : P2WUC3
  • Manufacturer : Cyber Power Systems (USA), Inc.
  • Address : 4241 12th Avenue East, Suite 400, Shakopee, MN 55379
  • Website : www.CyberPowerSystems.com

Features

  1. Standard Grounded Outlets (2)
  2. USB-C Charging Ports (3): Connect and charge up to three (3) USB devices using the surge protected USB-C charging ports. *USB outlets cannot be used as a USB hub. This device does not transfer data.
  3. Surge Protected Indicator: Illuminated when the surge protection is working properly.

Specifications

  • Outlets: 2 Standard Grounded Outlets
  • USB Ports: 3 USB-C Charging Ports
  • Surge Protection: 500 Joules
  • Electrical Rating: 125 V/15 A/1875 W
  • UL Clamping Voltage: UL 1449 4th/900 V (L-N)
  • Maximum Peak Current: 15,000 A
  • Response Time: Less than 1 nanosecond
  • USB Charging Rating:
    • USB-C Charging Output: 5 V/3 A Max
    • USB Total Output: 30 W

Warnings and Caution

WARNING: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CAUTION: If the protected indicator does not light, the surge protector’s AC lines are no longer protected from surge. The surge protector may have received a power surge or spike beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The surge protector has protected your connected equipment as designed, but it will not protect against future surges and spikes. It should be replaced.

Technical Support
If you need technical support or have any questions, please contact the manufacturer at the address provided above or visit their website.

Conformance Approvals
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

OVERVIEW

CyberPower-P2WUC3-Professional-Surge-Protection-FIG-1

FEATURES

  1. Standard Grounded Outlets (2)
  2. USB
  3. Charging Ports* (3)
    • Connect and charge up to three (3) USB devices using the surge protected USB-C charging ports.
    • USB outlets cannot be used as a USB hub. This device does not transfer data.
  4. Surge Protected Indicator
    • Illuminated when the surge protection is working properly.

SPECIFICATIONS

  • Model Number: P2WUC3
  • Outlets: 2 Standard Grounded Outlets
  • USB Ports: 3 USB-C Charging Ports
  • Surge Protection: 500 Joules
  • Electrical Rating: 125 V/15 A/1875 W
  • UL Clamping Voltage: UL 1449 4th/900 V (L-N)
  • Maximum Peak Current: 15,000 A
  • 1 AC Line Protected: L- N: 15,000 A
  • Response Time: (The maximum surge possible on household wiring is 6,000 volts) Less than 1 nanosecond
  • USB Charging Rating:
    USB-C Charging Output: 5 V/3 A Max
    USB Total Output: 30 W

WARNING : This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK:

Use only in dry locations and only indoors.

  • DO NOT plug into another relocatable power tap.
  • DO NOT “daisy chain” surge protectors.
  • DO NOT use with any aquarium equipment.
  • DO NOT use if properly grounded outlets are not available.
  • DO NOT install this device if there is less than 10 meters (30 feet) of wire between the electrical outlet and electrical service panel.
  • DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.

TROUBLESHOOTING

If the protected indicator does not light, the surge protector’s AC lines are no longer protected from surge. The surge protector may have received a power surge or spike beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The surge protector has protected your connected equipment as designed, but it will not protect against future surges, and spikes. It should be replaced.

FOR MORE INFORMATION
Visit CyberPowerSystems.com for more information regarding:

  • Product information and certifications
  • Product warranty
  • Connected equipment guarantee

TECHNICAL SUPPORT

© 2023 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.

CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

WARNING : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Cyber Power Systems (USA), Inc. 4241 12th Avenue East, Suite 400  Shakopee, MN 55379 CyberPowerSystems.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CyberPower User Manuals

Related Manuals