ZHANYAO M73-ENC Touch Control TWS Earbuds User Guide

ZHANYAO M73-ENC Touch Control TWS Earbuds

Please read this manual carefully before using

Functions

Twin Mode

Step 1

• Take two earbuds out of the package

Step 2

• Put two earbuds in the charging case, and charge the case 30 minutes, then go to step 3

Step 3

• Open the charging case, the earbuds will flash blue light slowly after 3.5 seconds (if always flash blue and red light, please 6 click the Right earbuds, wait until its flash blue light slowly

Step 4

• Turn on the bluetooth on device and search ” M73-ENC” to connect

Single Mode

Step 1

• Take out any one of the earbud from charging case

Step 2

• Turn on the bluetooth on device and search M73-ENC to connect
  • Remark: the earbuds will be connected automatically with mobile if it has been connected before

Long Press

• Long press 2s / Voice assistant
• Long press 2s / Reject call
• Long press 4s / Power on / off

Charge

Please use the original charging cable.
Fast charging are prohibited.

• Earbuds
  • Full charge time: 1H
  • Input: 5V 300MA
  • Output: 5V 30MA

Charge

If any of the following conditions accur while using this product, it can be resolved independently

1. Left & Right earbud can not pairing with each other

   • Take out the earbuds from charging case, two earbuds always flash red and blue or there are two bluetooth name of M73-ENC on the mobile.
   • Solution: Turn off both earbuds, delete the connection record M73-ENC displayed in the connection list of the phone or other bluetooth devices. Then 6 click the right earbud quickly,after 2-3s,both earbuds will flash blue slowly, that means they have paired with each other successfully.

2. Only one earbud working

   • There is only sound on one side when the headset is connected to the mobile phone, and the lights on the other side do not flash or the red and blue lights flash alternately.
   • Solution: Delete the connection record M73-ENC displayed in the connection list of the phone or other bluetooth devices. Put two earbuds back into the case, close the case and then tack out the earbuds. If both earbuds flash red and blue light, pls 6 click the right earbud quickly, after 2-3s, both earbuds will flash blue slowly, that means they have paired with each other successfully. Then open the mobile bluetooth to search M73-ENC to connect.

3. Earbuds can not be connected with mobile
   Solution:
   

4. Turn off the earbuds and turn off the bluetooth on mobile, then turn on earbuds and turn on bluetooth on mobile, to search the bluetooth name M73-ENC again.

5. If the earbuds have been connected by the mobile before, then just need to find the bluetooth name in the bluetooth list, and connected.

6. Delete the bluetooth list record on mobile, then search M73-ENC to connect.

Specifications

Earbuds:

• Bluetooth version: JL 5.3
• Distance: 10M
• Battery: 30mAh
• Full charge time: 1h
• Play time: 4-5 h
• Weight: 8g

Charging case:

• Battery: 280mAh
• Full charge time: 2h
• Input: 5V300MA
• Output: 5V 30MA
• Size: 60.248.232mm
• Weight: 34g

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>