Televes PicoKom Indoor Domestic Indoor User Manual
- June 5, 2024
- Televes
Table of Contents
Televes PicoKom Indoor Domestic Indoor
Important safety instructions Safe installation
- Read these instructions before handling or connecting the equipment. Keep these instructions. Heed all warnings. Follow all instructions.
- Clean only with dry cloth.
- Do not use this apparatus near water. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as glasses, shall be placed on the apparatus.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Please allow air circulation around the equipment.
- Do not place the equipment in a highly humid environment.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place naked flames, such as lighted candles on or near the product. Do not place the equipment in a place where it can suffer vibrations or shocks.
- Only use attachments/accessories specified by the manufacturer.
Safe operation of equipment connected to the mains supply
- • Ambient temperature should not be higher than 45ºC.
- Power requirements for this product are: 220-230V~ 50/60Hz.
- It is strongly recommended not to connect the equipment to the mains supply until all connections have been done.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- To disconnect the equipment from the mains supply pull the plug never the cable.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning
- Reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Do not take the cover off the equipment without disconnecting it from the mains supply.
- his apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Do not connect the equipm
- This symbol indicates that the equipment complies with the safety requirements for class II equipment.
- To identify electrical equipment designed primarily for indoor use.
- The equipment complies with the CE mark requirements.
APPLICATIONS
TECH INFO
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>