cudy AC1200 Dual Band Unlocked 4G LTE Modem Router Installation Guide
- June 4, 2024
- cudy
Table of Contents
cudy AC1200 Dual Band Unlocked 4G LTE Modem Router
Package Content
- 1 x 4G LTE Router
- 1 x Power Adapter
- 1 x Quick Installation Guide
- 1 x Ethernet Cable
- 1 x SIM Adapter
Quick Installation
-
Insert the Micro SIM card into the slot until you hear a click.
Size : Use a micro SIM card, or manually convert a nano SIM card using the SIM card adapter.
Note : To prevent damage, do not insert a nano SIM card directly, and do not insert an empty SIM card adapter or any other object into the slot.
Direction : With the gold contacts facing down, gently slide the SIM card into the slot. -
Connect power adapter and turn on the router. Waiting for 2 minutes for it to start.
-
Check the status of the system LED.
- If the system LED turns to solid blue, means connect to 4G network successfully.
- If the system LED turns to solid purple, means connect to 2/3G network.
- If the system LED turns to solid red, please follow the instructions of Customize the 4G Router.
Customize The 4G Router
- Connect the router via ethernet cable or Wi-Fi. Network name and password is printed on the bottom of the router. Note : For LT450 and LT500, the device will create two WiFi
- Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/) in the address bar, use admin as password to login
- Below page would pop up if your SIM card needs PIN to unlock. Please enter your PIN and click Save & Apply, then wait 15 seconds to connect to the Internet
- Then please check 4G information card of the status page. If the status is connected, means connected to the internet successfully
- If 4G is not connected, or if you want to customize the router yourself, click “Quick Setup” and follow the step-by-step instructions to configure the router.
Note
- If you are not sure about APN parameters, please contact your internet provider.
- If you meet any other problems, don’t hesitate to contact our technical support team: [email protected]
LED and Button
Need Help?
- Q1. What should I do if I cannot access the web management page?
- A1: If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
- A2: Make sure http://cudy.net/ or http://192.168.10.1/ is correctly entered in the web browser.
- A3: Use another web browser and try again.
- A4: Reboot your router and try again.
- A5: Disable and enable the active network adapter in use.
- Q2. How do I restore the router to its factory default settings?
- A1: With the router powered on, press and hold the RESET button for 6 seconds before release. Wait the router resets.
- A2: Log in to the web management page of the router, and go to Advanced Settings >Reset , click Perform Reset and wait until the reset process is complete
EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.cudy.com/ce.