alphacool 13475 Core Geforce RTX 4090 Suprim with Backplate User Guide

June 12, 2024
ALPHACOOL

alphacool 13475 Core Geforce RTX 4090 Suprim with Backplate User Guide

Core Geforce RTX 4090 Suprim with Backplate

Check compatibility and prepare graphics card

Check compatibility

Before starting the cooler assembly, compare your card with the pictures in our configurator.
To do so, visit https://www.hwconfig.com and search for your graphics card or cooler model.
For a definitiv identification, you can also compare the PCB number. The cooler was designed for a special PCB layout. Occasionally, graphics card manufacturers may revise the
design of their card slightly, causing the cooler not to fit on later models. During assembly, please make sure taller parts have enough space around them and that the cooler does not damage your graphics card.

Alphacool International GmbH is not liable for assembly errors occurring due to negligence, such as selecting an incompatible cooler.

Prepare graphics card

Put the hardware on an antistatic mat. Begindismantling the original cooler. Depending on the structure of the cooler, remove the screws at the back of the card and carefully unhook the fan connector first. If the original cooler uses thermal glue, extreme care should be taken as you can easily damage parts. Pick up all the
items carefully. Next, clean the hardware of thermal paste or pad residues with a solvent (e.g. isopropanol alcohol).

Remove spacers

Place thermal pads on cooling block

Mount PCI bracket

Apply Thermal Grease

Install PCB

Install PCB

Place thermal pads on PCB backside

Connect ARGB lighting

Screw in screw plugs with the tool

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ALPHACOOL User Manuals

Related Manuals