MEAN WELL LPV-150-12 150W Single Output Switching Power Supply Instruction Manual

: June 12, 2024
: MEAN WELL

Table of Contents

MEAN WELL LPV-150-12 150W Single Output Switching Power Supply
Product Information
Product Usage Instructions
Features
Applications
Description
Model Encodina
SPECIFICATION
Mechanical Specification
Recommend Mounting Direction
Block Diagram
Derating Curve
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEAN WELL LPV-150-12 150W Single Output Switching Power Supply

MEAN WELL LPV-150-12 150W Single Output Switching Power Supply-
PRODUCT

Product Information

Model| DC Voltage| Rated Current| Rated Power| Line Regulation| Load Regulation| Efficiency| Input Voltage Range| Frequency Range| Dimensions| Weight| More Information
---|---|---|---|---|---|---|---|---|---|---|---
LPV-150-12| 12V| 10A (0 ~ 10A)| 120W| 200mVp-p| 500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;| 87%| 180 ~ 305VAC 254 ~ 431VDC| 47 ~ 63Hz| 191mm x 63mm x 37.5mm (L x W x H)| 0.74Kg| Product
Manual
LPV-150-15| 15V| 8A (0 ~ 8A)| 120W| 200mVp-p| 500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;| 88%| 180 ~ 305VAC 254 ~ 431VDC| 47 ~ 63Hz| 191mm x 63mm x 37.5mm (L x W x H)| 0.74Kg| Product
Manual
LPV-150-24| 24V| 6.3A (0 ~ 6.3A)| 151.2W| 200mVp-p| 500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;| 89%| 180 ~ 305VAC 254 ~ 431VDC| 47 ~ 63Hz| 191mm x 63mm x 37.5mm (L x W x H)| 0.74Kg| Product
Manual
LPV-150-36| 36V| 4.2A (0 ~ 4.2A)| 151.2W| 200mVp-p| 500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;| 89%| 180 ~ 305VAC 254 ~ 431VDC| 47 ~ 63Hz| 191mm x 63mm x 37.5mm (L x W x H)| 0.74Kg| Product
Manual

Product Usage Instructions

To use the LPV-150 series single-output switching power supply, follow these instructions:

Ensure that the input voltage is within the specified range of 180 ~ 305VAC or 254 ~ 431VDC.
Connect the power supply to the desired load using the appropriate wiring.
Make sure the load does not exceed the rated current for the specific model of LPV-150 power supply.
Turn on the input power source.
The power supply will provide a stable DC voltage output according to the selected model.
Monitor the load and ensure it remains within the specified range to prevent overload.
If an overload occurs, the power supply will enter hiccup mode and automatically recover once the fault condition is removed.
In case of an overvoltage or over-temperature condition, the power supply will shut down the output voltage. Once the condition is resolved, the power supply will automatically recover.
Ensure that the working temperature is within the range of -25°C to +65°C. Refer to the derating curve for temperature adjustment guidelines.
Keep the power supply in a well-ventilated environment with a working humidity range of 20% to 90% RH non-condensing.
Store the power supply in a dry and cool place with a temperature range of -40°C to +80°C and a humidity range of 10% to 95% RH.

Features

Constant voltage design
90~132VAC input for LPVL-150
180~305VAC input for LPV-150
Fully encapsulated with IP67 level (Note. 7)
Class II power unit, no FG
Protections: Short circuit/Overload/Over voltage/
Over Temperature
Fully isolated plastic case
Fanless design, cooling by free air convection
100% full load burn-in test
Low cost, high reliability
Listed in UL Sign Component Manual (SAM)
Type “HL” for use in class I, Division 2 hazardous (Classified) location luminaires for LPVL-150
2 years warranty

Applications

for Bank type only) (for Bark types only) Suitable for LED-related fixtures or appliances (such as LED Decoration or Advertisement devices)(Note. 10)

GTIN CODE

MW Search : https://www.meanwell.com/serviceGTIN.aspx

Description

LPV-150 and LPVL-150 are 150W single-output power supplies that specifically and perfectly work for LED lighting and LED moving sign applications.
As a class II power unit, these two series are housed with the UL 94 V-0 rated flame retardant plastic enclosure. The IP67 design allows every model to fit the use at dry, damp, and wet locations.
Both series are constant voltage mode designs that various models with 12V, 15V, 24V, 36V, and 48V are offered for LPV-150 where as 12V and 24V are provided for LPVL-150.

Model Encodina

MEAN WELL LPV-150-12 150W Single Output Switching Power
Supply-FIG-2

SPECIFICATION

MEAN WELL LPV-150-12 150W Single Output Switching Power
Supply-FIG-6

NOTE

All parameters NOT specially mentioned are measured at 230VAC(115VAC for LVL) input, rated load and 25 C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0. 1uf & 47uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
Derating may be needed under low input voltage. Please check the static characteristics for more details.
The power supply is considered as a component that will be operated in combination with final equipment. Since MC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify MC Directive on the complete installation again.
Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
Suitable for indoor use or outdoor use without direct sunlight exposure.
The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).
For any application note and I water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LEDEN.pdf
This product is not intended for LED lighting luminaire applications in the EU.(In the EU the LP/PF/XL series are recommended.)